Operation Manual

ENGLISH
55
Using a memory card
You can use the following memory cards:
SD Card
K
Multi Media Card
K
Memory Stick
K
1. Insert the memory card into the card reader (Fig. 1/14).
2. Press the DVD/SD/USB button (Fig. 3/26) on the remote control to
switch the DVD player to le mode.
3. Select the desired le(s) and start playback
Page 56, “Selecting le/
directory and starting replay”.
4. If you want to switch back to DVD mode, press the DVD/SD/USB
button again (Fig. 3/26).
NOTE:
To nd out which playable les are available, the DVD player now
K
searches the content of the storage device. This process may take
some time for large storage devices. During this time you will see the
status report “Waiting…“on the screen.
If you have also connected an output unit to the USB port, its
K
content is rstly displayed. Press the DVD/SD/USB button again
(Fig. 3/26) to display the content of the memory card.
The le mode can only be selected if the unit is in DVD mode.
K
Using a USB medium
By means of the USB connection you can connect numerous devices
to the DVD Player. Examples of such devices are USB memory sticks or
digital cameras.
This device has been developed in accordance with the latest technical
developments in the USB eld. Unfortunately the large number of dif-
ferent types of USB storage media on oer today makes it impossible to
guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Insert a USB storage medium into the corresponding connection of
the DVD player (Fig. 1/9).
2. Press the DVD/SD/USB button (Fig. 3/26) on the remote control in
order to switch the DVD player to the le mode.
NOTE:
In order to nd out which les can be played back the DVD player
K
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time. During this time
you will see the words “Waiting…” on the screen.
The le mode can only be selected if the device is in DVD mode.
K
3. Select the desired le(s) and start playback
Page 56, “Selecting le/
directory and starting replay”.
4. If you would like to return to DVD mode, press the DVD/SD/USB
button (Fig. 3/26) again.