Operation Manual

ENGLISH

Fig. 2/23

Composite-Video

Composite-Video is used to transmit both Video data.

1. Plug the Composite-Video jack into the socket on the back of the

player.

2. Plug the Composite-Video jack into the corresponding socket on your

playback device.

Connecting the Audio cable

You can choose from three transmission methods for audio signals.

You must generally choose rst whether you would like to have the

sound coming from your TV, or through a Stereo or 2.1-Amplier. The

Audio cable must then be connected to the TV or an amplier accord-

ingly.

NOTE:

If your amplier is equipped with a digital output, you should use the

amplier. You will experience a much better audio quality, and the

installation is much easier.

Fig. 2/26, 27

Stereo

Connect both Audio cables for the right and the left speakers to your

playback device or your amplier.

1. Plug the Audio jacks into the sockets on the back of the player

(R/L). Plug the audio cable for the subwoofer into the (SUB) jack on

the back of the unit.

2. Plug the Audio jacks into the corresponding sockets on your play-

back device or your amplier.

NOTE:

The 2.1 CH AUDIO OUT outputs are xed and are not changed by the

volume control of the Music Center.

Fig. 2/16

2.1-Audio signal (Connecting the Loudspeakers Supplied)

Connect the SPEAKERS/SUBWOOFER connection on the rear of the DVD

player to the corresponding connections on the rear of the individual

loudspeakers.

Proceed as follows:

1. Connect the end of the cable to the socket on the rear of the device.

Please ensure the correct coniguration:

- (1) Connection for Subwoofer: Bass

- (2) Speaker front left

- (3) Speaker front right