Operation Manual

ENGLISH
58
Using the menu
Navigation and selection
Use the
K
Cursor Buttons (Fig. 3/32) (
/ ) on the remote control to
browse through the main menu.
In contrast to this, you must use the
K
Cursor Buttons (
/ ) to move in
the sub-menu.
Select a menu option with the
K
SELECT -button (Fig. 3/15).
Use the
K
SELECT -button also to select an option (e.g. “PAL” in the
illustration on the left). The selected option (in the example “PAL”) is
now highlighted.
To return to the submenu or main menu, press the
K
Cursor Button
.
Slide control
In some menus you will nd slide controls with which you can adjust the
volume or picture brightness, for example. The slide control is used as
follows:
1. Select with the SELECT -button.
2. Move the control with the Cursor Buttons (
/ ).
3. Conrm the entry with the SELECT-button.
Overview of the main menu
GENERAL = General Setup
K
AUDIO = Audio Setup Page
K
DOLBY = Digital Setup Page
K
VIDEO = Video Setup Page
K
PREFERENCES = Preference Page
K
NOTE:
Some of the menu settings are only available in stop mode (depending
on the DVD).
General Setup
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the TV-
aspect will be 4:3. However, most feature lms have an aspect of 16:9,
the image is therefore too wide for the TV-screen.
Here you can specify how the replay of the lm is to be adapted to the
playback device:
Normal/PS:
K
You will only see the middle section of the lm. The
borders will be cut o.
Normal/LB:
K
You will see the complete width of the lm. The lm is
thus reduced in size, whereby black bars appear below and above the
lm.
16:9:
K
Select this option if you use a wide screen TV for replay. Please
note that lms, that have been recorded with TV-aspect 4:3 can still
be replayed using aspect 4:3. This means, that replaying this lm will
not require the complete wide screen area of the television.