EBGL4 ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • Before maintenance cut the power supply. • Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass. • Only use the core temperature sensor recommended for this appliance. • Be careful, when you touch the storage drawer. It can get hot. • To remove the shelf supports first pull the front of the shelf support and then the rear end away from the side walls.
ENGLISH • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable. • Do not let mains cables to come in touch with the appliance door, specially when the door is hot. • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
www.electrolux.com • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Service. • Be careful when you remove the door from the appliance. The door is heavy! • Clean regularly the appliance to prevent the deterioration of the surface material. • Remaining fat or food in the appliance can cause fire. • Clean the appliance with a moist soft cloth. Only use neutral detergents.
ENGLISH 7 3.1 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Grill- / Roasting pan To bake and roast or as a pan to collect fat. Core temperature sensor To measure how far the food is cooked. Storage drawer Below the oven cavity is the storage drawer. WARNING! The storage drawer can become hot when the appliance operates. Do not store any flammable materials in the drawer. 4. BEFORE FIRST USE WARNING! Refer to the Safety chapters. 4.
www.electrolux.com 4.2 Setting and changing the time 2. Touch . 3. Touch or After the first connection to the mains, all symbols in the display are on for some seconds. For the subsequent few seconds the display shows the software version. After the software version goes off, the display shows h and 12:00. 4. Changing the time of day You can change the time of day only if the appliance is off. Touch . flashes in the display. To set new time of day use the above procedure.
ENGLISH Sensor Field Function Description 6 DOWN, UP 7 OK 8 LIGHT To activate or deactivate the lamp in the appliance. 9 CLOCK To set the clock functions. 10 MINUTE MINDER To set the minute minder. To choose a heating function or a clock function and to set the minute minder, temperature or time of day. To confirm the selection or setting. 5.
www.electrolux.com Symbols Name Description Oven light You deactivated the light. Minute minder The minute minder function operates. 5.4 Heat-up indicator If you activate a heating function, the bars come on one by one. in the display The bars show that the temperature in the appliance increases or decreases. When the appliance is at the set temperature, the Heat-up indicator goes off the display. 6. DAILY USE WARNING! Refer to the Safety chapters.
ENGLISH 6.1 Setting the heating function 1. Touch . The display shows a symbol, the number of the heating function and the preset temperature. 2. Touch function. 3. Touch or the appliance starts automatically after five seconds. or to set a heating If you activate the appliance with and do not set a heating function or programme, the appliance deactivates automatically after 20 seconds. 6.2 Changing the temperature Touch or to change the temperature in steps of 5 °C.
www.electrolux.com 7. CLOCK FUNCTIONS SYMBOL FUNCTION DESCRIPTION TIME OF DAY To show the time of day. To change the time of day, refer to 'Setting the time of day'. DURATION To set how long the appliance operates. END To set when the appliance deactivates. You can use Duration and End at the same time (Time delay) if you want the appliance to activate and deactivate automatically later. 7.1 Count Up Timer 7.
ENGLISH 5. 6. When set time ends, an acoustic signal sounds for two minutes. "00:00" and flash in the display. Touch a sensor field to stop the acoustic signal. 13 switched on and off automatically later. In and then case first set the DURATION END function (refer to "Setting the DURATION" and "Setting the END" ). 7.5 Setting the Time delay function DURATION and END can be used at the same time, if the appliance is to be 8. AUTOMATIC PROGRAMMES WARNING! Refer to the Safety chapters. 1. 2.
www.electrolux.com 9. USING THE ACCESSORIES WARNING! Refer to the Safety chapters. 9.1 Core temperature sensor The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appliance deactivates. 6. There are two temperatures to set: • The oven temperature: refer to the table for roasting in the recipe book. • The core temperature: refer to the table for the core temperature sensor in the recipe book.
ENGLISH When you cook with the core temperature sensor, you can change the temperature shown in the display. After you put the core temperature sensor in the socket and set a heating function and temperature, the display shows the current core temperature. 15 Touch again and again to see three other temperatures: • The set core temperature • The current oven temperature • The current core temperature 9.
www.electrolux.com 10. ADDITIONAL FUNCTIONS 10.1 My Favourite Programme function Use this function to save your favourite settings of temperature and time for a heating function. 1. Set the temperature and time for a heating function or programme. 2. 3. Touch and hold for more than three seconds. An acoustic signal sounds. Deactivate the appliance. Using My Favourite Programme function: • To activate the function touch . The appliance activates your favourite programme.
ENGLISH Activate the Settings menu: 1. When the appliance is deactivated, for three seconds. touch and hold The display shows "SET1" and "1" flashes. 2. Touch / 3. Touch . 4. Touch / of the setting. to set the setting. 5. Touch 17 . 10.5 Automatic switch-off For safety reasons the appliance deactivates automatically after some time if a heating function operates and you do not change any settings. to change the value Oven temperature Switch-off time 30 °C - 115 °C 12.5 h.
www.electrolux.com 11.1 Shelf supports Removing the shelf supports You can remove the shelf supports to clean the side walls. 1. Pull the front of the shelf support away from the side wall. 2. Pull the rear end of the shelf support away from the side wall and remove it. 2 1 Installing the shelf supports Install the shelf supports in the opposite sequence. 11.2 Oven ceiling You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.
ENGLISH 2. Install the shelf supports. 19 11.3 Removing / inserting the door To clean the door remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy. There is a risk of injury or damage to the appliance. A A Removing the door Open the door as far as it goes. Press down the clamping levers (A) on the two door hinges. 1. 2. 3. 4. Close the door until it is at an angle of approximately 45°.
www.electrolux.com 3. 4. 5. Replace the lamp with a halogen, 230 V, 25 W, 300 °C heat resistant oven lamp. Install the glass cover. Install the shelf support. 12. WHAT TO DO IF… WARNING! Refer to the Safety chapters. Problem Possible cause Solution The appliance does not heat up. The appliance is deactivated. Activate the appliance. The appliance does not heat up. The time of day is not set. Set the clock. Refer to "Setting and changing the time". The appliance does not heat up.
ENGLISH Problem Possible cause Solution The appliance is activated The test mode is activaand does not heat up. ted. The fan does not operate. The display shows “Demo”. 1. 2. 3. If you cannot find a solution to the problem yourself, contact your dealer or the service centre. 21 Deactivate the appliance. Touch and hold until the appliance activates and deactivates. Touch and hold and at the same time until an acoustic signal sounds and “Demo” goes out.
www.electrolux.com A 13.2 Installing the oven under a work surface 600 WARNING! Installation into flammable material must agree with NIN SEV 1000 (Swiss Association of the Cantonal Fire Insurance Companies) fire protection guidelines and regulations. B A A A ca.50 A 757 N 762 + 3 A 435 170 A 160 A A 767 N 780 WARNING! When installing next to a wood-fuelled boiler, a heatproof and heatinsulating plate must be mounted at the height of the appliance and at least 30 cm deep.
ENGLISH 23 Only a qualified person can connect the appliance to the electricity supply. D E 1. 2. 3. 4. F 5. 6. Open the mains terminal cover (D). Put the connection cable into the supplied rings (E). This is to prevent the cable from rubbing against the drawer. The connection cable is on the housing side. Install the cable grip (F). Connect the terminal as in the illustration. Put the cable into the strain relief clamp. Close the mains terminal cover. 13.
www.electrolux.com Ersatzteilverkauf/Points de vente de rechange/Vendita pezzi di ricambio/ spare parts service: 5506 Mägenwil, Industriestrasse 10, Tel. 0848 848 111 Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita 8048 Zürich, Badenerstrasse 587, Tel. 044 405 81 11 Garantie Für jedes Produkt gewähren wir ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2 Jahren. (Ausweis durch Garantieschein, Faktura oder Verkaufsbeleg).
ENGLISH 25
www.electrolux.
ENGLISH 27
892934947-D-412013 www.electrolux.