Operation Manual

36
English
36
EC4835_IM 26.04.16
2. In order to store the radio station, press the
P-MODE / MEM. button (16). The next pre-set location
(for example P 02) flashes in the display.
3. Use the FOLD. / 10 / M. buttons (14 / 15) to select
the desired memory location.
4. Press the P-MODE / MEM. button. The radio station
will be stored.
Selecting stored radio stations
The stored radio stations can be selected by repeatedly
pressing the
FOLD. / 10 / M. buttons.
Microphone operation
You may switch on the microphone for the Karaoke function
during any playback mode.
Using the microphone
NOTE:
In order to prevent an accoustic “build-up”, turn both
controls (MIC VOL and MIC ECHO) anticlockwise to the left
as far as they will go. Only then plug the microphone cable
into the jack.
1. Connect the microphone with the port MIC 1 or MIC 2
(9 / 10).
2. Slide the switch on the microphone upward in the direc
-
tion “ON”.
3. Adjust the microphone volume with the MIC VOL control
(4).
4. Use the MIC ECHO control (2) to generate echo effects.
5. Turn off the microphone when you do not use it. Slide the
switch downward in the direction “OFF”.
CAUTION:
To avoid audio feedback (sharp whistling sound), use
the microphone outside of the speaker’s reverberation
distance.
Playing back music files
You can play back your own music files in three ways: Via
cable, cordless via Bluetooth, or via the USB port.
By cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external device as follows:
• Connect to the AUX IN socket (11) using a 3.5 mm
stereo jack plug cable.
2. Use the FUNCTION button (21) to select AUX mode.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker.
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a
comfortable level.
Playing back Music via Bluetooth
Bluetooth involves a technology for wireless radio connection
of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-en
-
abled device. The functional radius is limited to approx. 15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device.
The A2DP profile involves a multi-vendor Bluetooth profile.
By streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device. To be able to remotely control the source, the play
-
back device must support the AVRCP profile (Audio Video
Remote Control Profile.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the opera
-
tion manual of your player.
2. Select the BT mode using the FUNCTION button.
The control lamp PAIR will blink blue. This signalizes
that the device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device “AEG
EC 4835 ” will
show in your player as a selection.
NOTE:
• Only one playback device can be connected
with the device at one time. If the device is
already connected with another playback device,
the device will not appear in the BT selection
menu.
• Press the PAIR button to disconnect an existing
Bluetooth connection. The PAIR control lamp
flashes blue.
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.