User manual

Knob indication Function
0 Off position
Keep warm setting
1 - 9 Heat settings
1. Turn the knob to a necessary heat
setting.
2. To complete the cooking process,
turn the knob to the off position.
5.9 Automatic heat-up
Only applicable for hobs
with the automatic heat-up
function.
The automatic heat-up function heats the
cooking zone with full power for some
time.
1. Turn the knob for the cooking zone
clockwise as far as possible (beyond
the highest heat setting).
2. Immediately set the necessary heat
setting.
3. To deactivate the function, turn the
knob to the off position.
5.10 Using the double zone (if
applicable)
To activate the double zone,
turn the knob clockwise. Do
not turn it through the stop
position.
1. Turn the knob clockwise to position
9.
2. Turn the knob slowly until you can
hear a click. The two cooking zones
are on.
3. To set the necessary heat setting
refer to "Heat settings".
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MIND-
ER at any time, also when the appliance is off.
6.2 Setting the time. Changing
the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until starts to flash.
www.aeg.com10