Description Before you start using your cooker you should familiarize yourself with its operation and technical features. The control pane! of the ENF 4 model incorporates the controls for 4 cooking plates, {two automatic plates, one super fast piste and one standard plate), and the thermostatically controlled oven, as well as the two control lamps. The oven is fitted with Interior light and a socket for the plug-in grill element.
The oven Before using your new oven unit for the first time, wipe all enameled surfaces with a soft cloth and warm water and wash the interior and accessories with hot soap water. With the baking sheet inserted, leave the oven for about /2 hour at 270 ° C to eliminate the smell of newness. The oven thermostat automatically maintains the temperature you have selected. This ensures best results for all your roasting and backing. The red control lamp lights up whenever the oven is being heated.
How to use the oven control switch Please note that the automatic oven temperature control B C) | C 250° C—275° C G Drying Roasting Roast dehydrating braising pasting i Surface § keeping food cooking and surface Sterilizing | prawning Grilling warm baking owing light Rawer Upper Grill only Upper and lower heat together heat heat element is not in operation when working with only lower or upper heat.
Automatic cooking is so simple: Setting table for the control knob of the automatic AEG Regal plate Place pan with the prepared food on the plate — set the control knob — press the “automate” button — and forget about it. The settings given below are for the automatic AEG Regal plates of 18 cm (77} dia. and of 14,5 cm (5 3/4") dia. when operated in conjunction with the “automate” button. EXIGUITY To melt butter, chocolate. To dissolve gelatin. To prepare egg omelet.
Automatic AEG Regal plates for auto-cooking {Plates with the red mark). The automatic AEG Regal plate facilitates stemless heat contort to give you precisely the cooking temperature you require for the food you are cooking. The required temperatures is set by means of the control knob marked 1—12. You can naturally use the automatic AEG Regal plate as a super fast plate, i. e you switch to 12 for fast boiling and then down to 4-5.
Depression of the “automate” button facilitates automatic cooking in the 1—7 range. Cooking at an automatically maintained temperature is also possible in the frying range {(switch position 8 and higher}. Depression of the “automate” button is, however, without effect in this range and therefore unnecessary. To cancel the depression of the button, simply turn the control knob to “0* and the button is released.
Connected loads of the AEG plates AEG cooking plates with step control 1. Plates with 7-step control Switch positions Plate dia. 2. Automatic AEG Regal plates Switch positions Plaice dia. steeples up to approx. 100 W steeples up to approx. 80W?') ¥) mean output The switches of the AEG cooking plates with 7-step control facilitate fine heat control to suit all cocking requirements.
Description and operation of the syn chromatic timer To set the clock turn knob ‘a’ to the left or right, For normal operation {i. e. without the syn chromatic timer} figure 0 appears in the window marked ‘. An example to illustrate the automatic operation: The dish is required at 12 noon and takes one hour to cook.
The rotisserie Turning the oven control knob to B starts the driving mechanism. This means that the driving mechanism is in operation even when the rotary spit Is not used. Poultry and large joints are ideal for spit roasting. Eit the two support brackets {rotisserie frame) into the grill pan (see illustration).
Using the rotisserie with the special kebab attachment We recommend the use of two opposite or all four kebab skewers, This means that the required quantity should be distributed over two or four skewers. In larger households it may be necessary to have two or more grilling sessions.
infra-red grill element A grit socket with dummy plug is located at the rear panel of the oven. Remove the dummy plug and insert the grill element. Before starting any grilling operation, please remember to always insert the enameled baking sheet (supplied with the grill element) above the grill, with the curve racing up, and fit the grill guard below the control panel.
Connection and Installation See enclosed sketch for dimensions. Electric cookers must never be connected by anybody other than a qualified electrician, approved by your local electricity board. important! . Please not that heat-resistant adhesive (150 ° C) must be used for the veneer and/or plastic laminate of adjacent kitchen units. Unsuitable laminates and non-heat resistant adhesive are the cause of deformations and scaling on kitchen units.
Care and Maintenance Wis all enameled surfaces with a soft damp cloth. Soften burned-in food deposits with warm soap water. Never use scouring or acid cleaning agents. The grit element may only be cleaned when dry. Leave the vane open for a white to dry out. Use a good quality meta) polish to keep the steel sections bright. Never scrape or scour as this leaves permanent scratch marks.