User manual

ManualsBrandsAEG ManualsDomestic AppliancesEP3003011M

Problem Possible cause Remedy

The appliance does not

heat up.

The fuse is released. Make sure that the fuse

is the cause for the mal-

function. If the fuse re-

leases again and again,

contact a qualified elec-

trician.

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The pyrolytic cleaning

does not operate (the

time display shows

„C3“).

You did not fully close

the door, or door lock is

defective.

Fully close the door.

The display shows F102. • You did not fully close

the door.

• The door lock is defec-

tive

• Fully close the door.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again

• If the display shows

F102 again, contact

the Customer Care

Department

The display shows an er-

ror code that is not in

this list.

There is an electrical

fault.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again

• If the display shows

the error code again,

contact the Customer

Care Department

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavi-

ty.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................