Pomivalni stroj ESI 6231 Navodila za uporabo 1
Spoštovani kupec, Prosimo, da pred namestitvijo, priklopom in uporabo pomivalnega stroja najprej pozorno preberete ta navodila, predvsem pa napotke za varno uporabo. Navodila shranite, tako da vam bodo vedno pri roki, če pa pomivalni stroj prodate ali ga komu podarite, poskrbite, da bo novi lastnik dobil tudi ta navodila. Simbol trikotnika vas opozarja na navodila, ki so pomembna za varno uporabo in pravilno delovanje stroja. Ta navodila morate upoštevati.
Navodila za varno uporabo Električni aparati Electrolux so izdelani skladno z vsemi veljavnimi tehničnimi predpisi o varnosti. Vendar bi vas kljub temu radi opozorili na določena pravila, ki jih morate pri uporabi pomivalnega stroja upoštevati. Namestitev, priklop in prva uporaba • Pomivalni stroj mora biti vedno, tudi med prevozom, v pokončnem položaju. • Pred priklopom se prepričajte, da med transportom ni prišlo do poškodbe pomivalnega stroja.
• Nikoli se ne naslanjajte na vrata, pa tudi sedenje na njih ni dovoljeno; lahko bi prevrnili stroj. • Če pride do okvare, vedno najprej zaprite pipo za vodo. Nato izklopite stroj in potegnite vtikač iz vtičnice. Potegnite za vtikač, ne za kabel! Če gre za fiksni priključek, odvijte varovalko. Varnostna zapora vrat Vaš pomivalni stroj je opremljen s posebnim mehanizmom, ki, če je aktiviran, preprečuje odpiranje vrat. Ta varnostna funkcija preprečuje, da bi otroci med igro odpirali vrata pomivalnega stroja.
Za čisto okolje Embalaža Pomivalni stroj mora biti med transportom dobro zaščiten pred poškodbami, vendar pa je vsa embalaža izdelana iz materialov, ki jih je mogoče reciklirati, zato jih zavrzite na ustrezno zbirališče odpadkov. Materiale, ki so označeni s simbolom za recikliranje, je možno ponovno uporabiti. Zato jih sortirajte in odpeljite na ustrezno deponijo.
Značilnosti pomivalnega stroja Zgornja razpršilna šoba Gumijasto tesnilo za priklop dovoda vode na zgornji razpršilec Razpršilca Stikalo za nastavljanje trdote vode Posoda za sol Predalček za detergent Predalček za tekočino za lesk 6 Tablica s podatki Filtri
Upravljalna plošča Funkcijske tipke Prikaz poteka programa Tipke za izbiranje Tipka Opozorilni lučki Ročaj programov za zamik vklopa Funkcijske tipke: Razen programov, katerim so posamezne tipke namenjene, s pomočjo funkcijskih tipk opravljamo še naslednje nastavitve: Tipka za vklop/izklop Indikatorji poteka programa kažejo trenutno fazo, ki jo stroj opravlja.
Nastavljanje mehčalca vode Stroj mora pomivati z mehko vodo, da se na posodi in v notranjosti pomivalnega stroja ne bi nabiral kotlovec. Če je voda iz vaše pipe trda ( nad 4 stopinje po nemški lestvici), mora biti pred pomivanjem njena trdota znižana. V ta namen je vaš pomivalni stroj opremljen z mehčalcem vode; ta se regenerira samodejno v rednih presledkih s pomočjo slane raztopine. Količina soli, ki jo mehčalec vode porabi, je odvisna od trdote vode v vašem vodovodu.
Posebna sol za pomivalne stroje Če je voda iz vaše pipe pod 4 stopinje po nemški lestvici, uporaba soli za mehčanje vode ni potrebna. Mehčanje vode je mogoče na dva načina: Če uporabljate detergent, kateremu je že dodan nadomestek za sol, v stroj odmerite samo detergent. - V tem primeru morate nastaviti mehčalec vode ročno na stopnjo 0 in elektronsko na stopnjo 1, da preprečite dodajanje posebne soli iz posode za sol.
Med vsipanjem soli bo iz posode za sol iztekala voda, ki jo izrine sol. To naj vas ne skrbi, saj bo stroj to vodo izčrpal pred naslednjim pomivanjem. 5. Očistite odprtino, skozi katero ste vsipali sol, od ostankov soli. 6. Privijte nazaj pokrovček (vrtite v smeri vrtenja urinega kazalca). Pokrovček mora biti dobro zaprt, ker bo v nasprotnem primeru sol zašla v vodo za izpiranje in bo zaradi tega steklovina, oprana v pomivalnem stroju, motna. 7.
4. Vlijte v predalček tekočino za lesk, a ne več kot do oznake »max«. V predalčku je prostora za približno 140 ml tekočine. 5. Nato ponovno zaprite predalček; pravilno se mora zaskočiti. 6. S krpo obrišite tekočino, ki se vam je morda polila po stroju, saj se bo v nasprotnem primeru med pomivanjem tvorilo preveč pene. Nastavljanje količine tekočine za lesk, ki se bo med pomivanjem samodejno odmerila v vodo za lesk Tekočina za lesk se med izpiranjem samodejno odmerja v vodo za izpiranje.
Vsakodnevna uporaba Pred vsakim pomivanjem: • Preverite, če je potrebno dodati sol za pomivalne stroje ali tekočino za lesk. • Zložite posodo in jedilni pribor v pomivalni stroj. • Odmerite ustrezno količino detergenta. • Izberite ustrezni program pomivanja. • Vklopite pomivalni stroj. Gobic, kuhinjskih krp in drugih predmetov, ki vsrkajo vodo, ne smete pomivati v pomivalnem stroju. Prav vsa posoda žal ni primerna za pomivanje v stroju.
Košarica za jedilni pribor Na dolgih ali koničastih predmetih, zloženih v košarico za jedilni pribor, se lahko poškodujete, predvsem pa so nevarni za otroke. Take predmete zložite na zgornjo košaro. Jedilni pribor bo lepo pomit, če: 1. na košarico za jedilni pribor namestite mrežasti vložek; 2. zložite jedilni pribor v mrežasti vložek z ročaji navzdol. Pri nekaterih modelih košarica za jedilni pribor ni opremljena z mrežastim vložkom.
Skodelice, kozarci, krožnički… Manjše in bolj občutljive kose posode zložite na zgornjo košaro, dolge in koničaste predmete pa v temu namenjeni nosilec. - Zložite jih na nosilca za skodelice, tako da se med sabo ne dotikajo in da ima voda dostop do vseh površin. Če želite v spodnjo košaro zložiti velike posode, lahko zgornjo košaro dvignete. Kozarce za vino, peneče se vino in žganje lahko obesite na nosilec za skodelice. Kozarce ipd.
Odmerjanje detergenta Uporabljajte samo detergente, ki so primerni za pomivanje v pomivalnih strojih za gospodinjstva. Predno vklopite program pomivanja (razen predpranja!), morate napolniti predalček za detergent s posebnim detergentom za pomivalne stroje. Tudi detergent se bo samodejno odmeril v vodo med pomivanjem. Različni detergenti se med seboj razlikujejo po učinkovitosti. Zato pri določanju ustrezne količine upoštevajte navodila proizvajalca detergenta.
Tabela programov 1) Med različnimi fazami pomivanja se glasnost pomivalnega stroja razlikuje, saj je v določenih fazah pomivanje bolj intenzivno. 2) Poraba je merjena v standardnih pogojih delovanja in je odvisna tudi od načina, kako je posoda zložena, zato se te vrednosti spreminjajo. 3) Če je nastavljena stopnja 10 za trdoto vode, je lahko čas pomivanja daljši. 4) Ta program ni primeren za pomivanje posode, na katerih so zasušeni ostanki hrane.
Vklop pomivalnega stroja Prekinitev programa pomivanja z odpiranjem vrat pomivalnega stroja ! 1. Prepričajte se, da ste posodo pravilno zložili v stroj in da se lahko razpršilca neovirano vrtita. 2. Do konca odprite pipo za vodo, če je bila zaprta. 3. Zaprite vrata pomivalnega stroja. 4. Pritisnite na tipko za vklop in izklop; prižgala se bo kontrolna lučka. 5. Pritisnite na tipko za program, ki ga želite izbrati (glej Tabelo programov). Osvetli se prikazovalnik programov.
Zamik začetka pomivanja Ta funkcija vam omogoča, da prestavite začetek pomivanja za 3, 6 ali 9 ur. ! 1. Stroj najprej vklopite s pritiskom na tipko za vklop/izklop. 2. Pritiskajte na tipko za nastavitev časovnega zamika , dokler se ne osvetli lučka ob želenem številu ur zamika. 3. Pritisnite na tipko za želeni program pomivanja. Osvetljena bosta indikator izbranega programa in lučka ob nastavljenem številu ur zamika. Po preteku nastavljenega števila ur bo začel stroj pomivati.
Vzdrževanje in čiščenje Nikoli ne uporabljajte čistil za pohištvo ali agresivnih čistilnih sredstev! • Če je potrebno, upravljalno ploščo očistite z mehko krpo in čisto toplo vodo. • Občasno preverite stanje notranjosti pomivalnega stroja, tesnila okoli vrat in filtra na dovodu vode (če je ta vstavljen) in jih po potrebi očistite. Čiščenje filtrov Redno preverjajte stanje filtrov in jih redno čistite. Umazani filtri zelo poslabšajo rezultate pomivanja. ! 1.
V primeru okvare Preden se obrnete na pooblaščeni servis, se prepričajte, da je vaš pomivalni stroj resnično pokvarjen in da ne gre za spodaj navedene napake, ki jih lahko zlahka odpravite tudi sami. Če pa ugotovite, da vam spodaj navedena navodila niso v pomoč in če pomivalni stroj ne deluje pravilno, se obrnite na pooblaščeni servis. Kode okvar Določene nepravilnosti, na katere vas stroj opozori z utripanjem indikatorjev, lahko običajno odpravite sami.
Rezultati pomivanja niso zadovoljivi. Posoda ni dobro pomita. • Morda ste izbrali program, ki ni ustrezal stopnji umazanosti in vrsti posode. • Morda ste posodo nepravilno zložili v pomivalni stroj, tako da voda ni imela dostopa do vseh površin. Košare ne smejo biti preveč napolnjene! • Morda so filtri umazani ali pa jih po čiščenju niste potisnili v pravilen položaj. • Morda ste uporabili premalo detergenta, ali neustrezen detergent.
Primer pravilnega zlaganja posode: Zgornja košara Zgornja košara Spodnja košara Košarica za jedilni pribor 22
Navodila za namestitev in priklop pomivalnega stroja Namestitev pomivalnega stroja • • • • Pomivalni stroj mora stati trdno in vodoravno na trdnih tleh. Nastavljive nožice s pomočjo priloženega ključa privijete ali odvijete tako, da prilagodite višino morebitnim neravninam tal, s pomočjo teh nožic pa tudi prilagodite višino stroja višini drugih kuhinjskih elementov. Pri vgradnih ali delno vgradnih pomivalnih strojih višino zadnjih nog nastavite s sprednje strani s pomočjo izvijača.
Delno vgradni pomivalni stroj Glej navodila o vgradnji! Prostostoječi pomivalni stroj • • Ni potrebno dodatno pritrjevanje. Če morate zaradi prostorske stiske pomivalni stroj postaviti ob plinski ali električni štedilnik ali peč, morate n.pr. štedilnik in pomivalni stroj ločiti s termično izolirano negorljivo ploščo (globine 57,5 cm). Plošča naj bo na strani, ki je obrnjena k štedilniku, prevlečena z aluminijasto folijo.
Priključitev pomivalnega stroja Dovod vode Pomivalni stroj je izdelan skladno z vsemi veljavnimi predpisi in je opremljen z varnostno napravo, ki preprečuje, da bi voda iz pomivalnega stroja odtekala nazaj v dovod pitne vode. Pomivalni stroj lahko priključite bodisi na hladno ali na toplo vodo (do največ 60°C). Nikoli ne smete priključiti pomivalnega stroja na vire vroče vode (n.pr. pretočne grelce).
Stroji, ki so priklopljeni na pipo s cevjo z varnostnim ventilom: Dovodna cev z varnostnim ventilom Cev z dvojnim plaščem je potrebno namestiti tako, da bo varnostni ventil na tisti strani, kjer je pipa. Tako je cev pod tlakom le, ko voda teče. Če začne cev puščati, varnostni ventil prekine dotok tekoče vode in črpalka za izčrpavanje vode v stroju se vklopi. Pri nameščanju cevi bodite pozorni na naslednje: - V dvojnem plašču cevi je električni kabel za napajanje varnostnega ventila.
Sistem za preprečevanje poplavljanja Vaš pomivalni stroj je opremljen z varnostnim sistemom, ki preprečuje škodo zaradi puščanja vode. Ob kakršnikoli okvari varnostni ventil takoj prekine dovod vode in vklopi črpalko za izčrpavanje vode iz stroja. Tako v nobenem primeru ne more priti do poplave v prostoru, saj voda preneha dotekati, vodo iz stroja pa črpalka takoj izčrpa. Sistem deluje tudi takrat, ko je pomivalni stroj izklopljen, zato naj bo stroj vedno priključen na električno omrežje.
Servisiranje Če vaš pomivalni stroj ne deluje pravilno, vzrok pa ni eden od navedenih v poglavju V primeru okvare, se obrnite na pooblaščeni servis. Pri tem navedite svoje ime, priimek, naslov, telefonsko številko, podroben opis nepravilnosti v delovanju, naziv in model aparata, številko proizvoda PNC in serijsko številko (te podatke boste našli na ploščici z oznakami, ki je na notranjem desnem robu vrat).