WATERKETTLE MODEL EWA 5110/5210 EN
D B EN E F C A G H I EN Components A. B. C. D. E. F. G. H. I.
Safety advice EN Read the following instruction carefully before using the appliance for • • level surface. • • • • • • • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Getting started EN EN 1. , rinse the inside and wipe the outside of the kettle with a damp cloth. 4. Close the lid and make sure it snaps in correctly. Otherwise the auto reliably. Place the kettle onto the base. Press down the ON/OFF switch; the indicator light will illuminate and the kettle will start to heat up. 2. Place the base unit surface. Plug the mains plug into a wall socket. Excess cord can be wound into the bottom of base unit. 3.
Cleaning GB EN 1. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water. , grab the strainer insert and lift out. Cleaning the heating plate – on the heating plate. Remove with a stainless steel cleaning agent. 3. Decalcifying is recommended regularly, depending on water hardness.
Share more of our thinking at www.aeg.