User manual

17
D
GR
NL
F
GB
GB
2. Place the base unit on a rm and at
surface. Plug the mains plug into a
wallsocket.Redundantcordcanbe
wound up at the bottom of base unit.
1. Before rst use: Boil water in the
kettleandpouritout.Repeatfor
2 or 3 times. This will remove any
remaning dust or residues.
(See the following steps on how to
use the kettle).
Wipe the outside of the kettle with a
damp cloth.
3. Press the Open lid button to open
the lid. Fill the kettle with fresh tap
water to the desired level (Min. 0.5L -
Max.1.7L).
Getting started
5. Press the Start/Cancel button to
start or stop boiling water.
(One short beep will sound)
Note: Press and hold the Start/Cancel
button longer to enter energy saving
mode (LCD turned o). (One long beep
will sound)
When the boiling process is nished,
two short beep followed by one long
beep sound will sound.
4. Close the lid and make sure that it
snaps in correctly. Otherwise, the
auto switch o function will not work
reliably.
Place the kettle on the base.
The LCD display will be illuminated,
(followed by one long beep sound), to
indicate that the appliance is plugged
in. The appliance is now in standby
mode.
6. The automatic switch o function.
When the water has boiled or the
kettle is moved from the base, it will
switch o automatically. If you wish
to stop the heating process before
the water is boiling, simply press the
Start/Cancel button.