User guide

Cleaning, Maintenance and Replacement of the cooker
interior lamp
______________________________________
Cleaning of the appliance
Cleaning must be carried out with the power
supply to the microwave oven switched off.
Use a mild detergent e.g. washing-up liquid,
lukewarm water and a soft cloth to clean the
Interior and exterior surfaces and food sensor.
Do not use chemical or abrassive compounds
to clean any part of the cooker.
Odours inside the cooker can be eliminated by
placing in it a cup of water with lemon juice
added, and boiling the mixture for a few
minutes.
Note: if the door seal has been damaged or is
broken do not use the cooker, have it checked
by a qualified AEG engineer or AEG appointed
service agent.
Fig. 19
Replacement of the cooker interior
lamp
Freestanding appliance
- Switch off the cooker and disconnect from
the power supply.
-> Slide the cooking guide with holder to the
left and lift it upwards.
- Turn the metal plate.
- Remove and replace the lamp through the
hole in the cabinet
(E 14 220/240 V/25 W max.)
- Re-assembie In reverse order.
Build-in model (TL 13 W) (fig. 15 and 16)
Fig. 20
18