52981 48/0de 21-01-2003 9:01 Pagina 1 FAVORIT 44610 Geschirrspülautomat Gebrauchsanweisung
152981 48/0de 21-01-2003 9:01 Pagina 2 Sehr geehrte Kundin, sehr geehrter Kunde! Lesen Sie bitte diese Benutzerinformation sorgfältig durch. Beachten Sie vor allem die Sicherheitshinweise auf den ersten Seiten dieser Benutzerinformation! Bewahren Sie bitte die Benutzerinformation zum späteren Nachschlagen auf. Geben Sie sie an eventuelle Nachbesitzer des Gerätes weiter.
152981 48/0de 21-01-2003 9:01 Pagina 3 Inhaltsverzeichnis Gebrauchsanweisung 4 Entsorgung 6 Wirtschaftlich und umweltbewußt spülen 6 Geräteansicht und Bedienblende 7 Vor der ersten Inbetriebnahme Wasserenthärter einstellen Spezialsalz für Wasserenthärter einfüllen Klarspülmittel einfüllen Klarspülerdosierung einstellen 9 9 11 12 13 Im täglichen Gebrauch Besteck und Geschirr einordnen Besteck einordnen Töpfe, Pfannen und große Teller einordnen Tassen, Gläser und Kaffeeservice einordnen Oberkorb
152981 48/0de 21-01-2003 9:01 Pagina 4 Gebrauchsanweisung Sicherheitshinweise Die Sicherheit von AEG-Elektrogeräten entspricht den anerkannten Regeln der Technik und dem Gerätesicherheitsgesetz. Dennoch sehen wir uns als Hersteller veranlaßt, Sie mit folgenden Sicherheitshinweisen vertraut zu machen: Aufstellung, Anschluß, Inbetriebnahme ● Der Geschirrspüler darf nur stehend transportiert werden. ● Überprüfen Sie den Geschirrspüler auf Transportschäden.
152981 48/0de 21-01-2003 9:01 Pagina 5 ● Geschirrspüler nie in Betrieb nehmen, wenn Netzkabel, Zu- /Ablaufschlauch beschädigt sind oder Bedienblende, Arbeitsplatte oder der Sockelbereich so beschädigt sind, daß das Geräteinnere offen zugänglich ist. ● Wenn die Anschlußleitung beschädigt ist, oder durch eine längere Zuleitung ausgetauscht werden soll, muß diese (erhältlich im AEG Kundendienst) durch einen von AEG autorisierten Kundendienst ersetzt werden.
152981 48/0de 21-01-2003 9:01 Pagina 6 Entsorgung Verpackungmaterial entsorgen Entsorgen Sie das Verpackungsmaterial des Geschirrspülautomaten sachgerecht. Alle verwendeten Verpackungsmaterialien sind umweltverträglich und wiederverwertbar. ● Kunststoffteile sind mit international genormten Abkürzungen gekennzeichnet: - >PE< für Polyethylen, z. B. Verpackungsfolien - >PS< für Polystyrol, z. B. Polsterteile (grundsätzlich FCKW-frei) - >POM< für Polyoxymethylen, z. B.
152981 48/0de 21-01-2003 9:01 Pagina 7 Geräteansicht und Bedienblende IN138 1. Nivellierelemente 8. Siebe 2. Geschirrkorbarretierung 9. Unterer Sprüharm 3. Oberer Sprüharm 10. Oberer Besteckkorb 4. Salzbehälter 11. 5. Behälter für Reiniger 6. Bedienblende 7.
152981 48/0de 21-01-2003 9:01 Pagina 8 1. Programmtasten 2. Kontrollampen Programmablaufanzeige Reinigen: Leuchtet auf, wenn die Reinigungsphase läuft. Trocknen: Leuchtet auf, wenn die Trocknungsphase läuft. Ende: Leuchtet auf, wenn das Spülprogramm beendet ist. Signalanzeigen Die Signalanzeigen haben folgende Bedeutung: Salz: Spezialsalz nachfüllen Klarspüler: Klarspüler nachfüllen 3. Griff 4. Kontrolllampe "Ein/Aus" 5.
152981 48/0de 21-01-2003 9:01 Pagina 9 Vor der ersten Inbetriebnahme Nachdem der Geschirrspüler korrekt aufgestellt und installiert wurde, müssen Sie ihn zuerst betriebsbereit machen. Führen Sie vor der ersten Inbetriebnahme folgende Schritte durch: - Transportsicherung entfernen; - Wasserenthärter einstellen; - Spezialsalz für Wasserenthärter einfüllen; - Klarspüler einfüllen; Ausführliche Informationen zu den einzelnen Punkten finden Sie in den nachfolgenden Kapiteln.
152981 48/0de 21-01-2003 9:01 Pagina 10 Wenn Sie den Geschirrspüler auf eine andere Stufe einstellen möchten, gehen Sie wie folgt vor: 1. Bei ausgeschalteter Maschine, gleichzeitig die INTENSIV 65° und NORMAL 65° drücken. 2. Die Tasten INTENSIV 65° und NORMAL 65° gedrückt halten und die Maschine über die Ein/Aus-Taste einschalten.
152981 48/0de 21-01-2003 9:01 Pagina 11 Spezialsalz für Wasserenthärter einfüllen Verwenden Sie nur Spezialsalz für Geschirrspüler. Füllen Sie niemals andere Salzarten (z.B. Speisesalz) oder Geschirrspülreiniger in den Salzvorratsbehälter. Dies zerstört den Wasserenthärter. Überzeugen Sie sich vor jedem Salzeinfüllen, daß Sie wirklich eine Packung Spezialsalz in der Hand haben. 1. Tür öffnen, Unterkorb herausnehmen. LE SA UT ZO LT SA LZ SA L SE 2.
152981 48/0de 21-01-2003 9:01 Pagina 12 Ihre Spülmaschine hat auf der Bedienungsblende eine Salznachfüllanzeige. Die Lampe leuchtet auf, wenn Salz nachgefüllt werden muß. Die Salznachfüllanzeige auf der Bedienungsblende leuchtet nach dem Salzeinfüllen noch 2-6 Stunden, vorausgesetzt der Geschirrspüler ist eingeschaltet. Bei Salzarten, die sich nur sehr langsam auflösen, kann dies auch länger dauern. Die Funktion des Gerätes ist dadurch jedoch nicht beeinträchtigt.
152981 48/0de 21-01-2003 9:01 Pagina 13 Den Verschluß fest anziehen. Füllen Sie kein Reinigungsmittel in den Behälter für den Klarspülmittel. Um eine übermäßige Schaumbildung beim nächsten Spülgang zu vermeiden, ist danebengelaufenes Klarspülmittel mit einem Lappen zu entfernen. Klarspülerdosierung einstellen Beim Geschirrspülen wird aus dem Vorratsbehälter Klarspüler ins Spülwasser abgegeben. Die Dosierung können Sie von 1-6, Klarspüler, einstellen.
152981 48/0de 21-01-2003 9:01 Pagina 14 Im täglichen Gebrauch ● Muß Spezialsalz oder Klarspüler nachgefüllt werden? ● Besteck und Geschirr in Geschirrspüler einordnen ● Reinigungsmittel für Geschirrspüler einfüllen ● Für Besteck und Geschirr geeignetes Spülprogramm auswählen ● Spülprogramm starten Besteck und Geschirr einordnen Schwämme, Haushaltstücher und alle Gegenstände, die sich mit Wasser vollsaugen können, dürfen nicht im Geschirrspüler gereinigt werden.
2981 48/0de 21-01-2003 9:01 Pagina 15 ● Bevor Sie das Geschirr einordnen, sollten Sie: - grobe Speisereste entfernen. - Töpfe mit eingebrannten Speiseresten einweichen. ● Beachten Sie beim Einordnen des Geschirrs und Bestecks: - Geschirr und Besteck dürfen die Sprüharme nicht behindern - Hohlgefäße wie Tassen, Gläser, Töpfe usw.
152981 48/0de 21-01-2003 9:01 Pagina 16 Besteck einordnen Vorsicht! Lange, spitze Besteckteile stellen im Besteckkorb, besonders für Kinder eine Gefahrenquelle dar (siehe Sicherheitshinweise). Damit alle Besteckteile vom Wasser umspült werden, sollten Sie 1. kurze Messer, Gabeln und Löffel mit dem Griff nach unten in den Gittereinsatz des Besteckkorbs stellen. 2. Löffel und Gabel nicht ineinander legen. Der Gittereinsatz kann auch abgeklappt werden (siehe Abb.).
152981 48/0de 21-01-2003 9:01 Pagina 17 Töpfe, Pfannen und große Teller einordnen Größeres und stark verschmutztes Geschirr im Unterkorb einordnen. Ordnen Sie keine kleinen Gegenstände ein, die durch die Körbe fallen könnten. UI12 UI51 Zusätzlich können die beiden rückwärtigen Reihen mit den Haltezapfen leicht und rasch umgeklappt werden. Das ermöglicht ein einfaches Einordnen von Töpfen und Salatschüsseln.
152981 48/0de 21-01-2003 9:01 Pagina 18 Tassen, Gläser und Kaffeeservice einordnen Kleineres, empfindliches Geschirr und lange, spitze Besteckteile im Oberkorb einordnen. ● In den oberen Geschirrkorb kommen vorzugsweise leichte Gegenstände, wie Plastikschüsseln usw. Beschweren Sie diese Teile mit anderen Geschirrteilen. ● Für hohe Geschirrteile läßt sich die linke Tassenauflage hochklappen. US69 Prüfen Sie nach dem Einordnen des Geschirrs, ob die Sprüharme sich frei drehen Können.
152981 48/0de 21-01-2003 9:01 Pagina 19 Oberkorb in der Höhe verstellen Maximale Höhe des Geschirrs im Oberkorb Unterkorb bei hochgestelltem Oberkorb 20 cm 32 cm bei normalgestelltem Oberkorb 25 cm 27 cm 1. Oberkorb bis zum Anschlag herausziehen. 2. Die vorderen Arretierungen (A) zur Seite klappen. 3. Oberkorb aus den Schienen herausziehen. 4. Oberkorb mit den unteren Rollen in die Schienen einschieben. RC01 5. Arretierungen wieder nach vorne klappen.
152981 48/0de 21-01-2003 9:01 Pagina 20 Reinigungsmittel einfüllen Verwenden Sie nur Reinigungsmittel für Geschirrspüler. Füllen Sie Reinigungsmittel ein: - Vor Beginn eines Spülprogramms. Das Reinigungsmittel wird während des Programms ins Spülwasser abgegeben. Beachten Sie bitte die Dosier- und Lagerempfehlungen der Hersteller auf den Verpackungen der Reinigungsmittel. Der Behälter für Reinigungsmittel ist auf der Innenseite der Tür. 1.
152981 48/0de 21-01-2003 9:01 Pagina 21 Spülprogramme mit 50°C-Phase und Kompaktreiniger Reinigungsmittel für Geschirrspüler lassen sich anhand ihrer chemischen Zusammensetzung in zwei Grundtypen einteilen: - herkömmliche, alkalische Reiniger mit ätzenden Bestandteilen niederalkalische Kompaktreiniger mit natürlichen Enzymen.
152981 48/0de 21-01-2003 9:01 Pagina 22 Programm auswählen (Programmtabelle) Programm Einzudrückende Tasten INTENSIV 65° Stark verschmutzt. Geschirr, Besteck und Kochtöpfe Ein/Aus + INTENSIV 65° NORMAL 65° Normal verschmutzt. Geschirr und Besteck Ein/Aus + NORMAL 65° * NORMAL 50° Normal verschmutzt. Geschirr und Besteck Ein/Aus + NORMAL 50° ** QUICK 50° 22 Verschmutzungsgrad und Geschirrart Leicht verschmutzt.
152981 48/0de 21-01-2003 9:01 Pagina 23 Verbrauchswerte * Programmbeschreibung Spülmittelmenge Programmdauer in Minuten Stromverbrauch in kWh Wasserverbrauch in Liter Hauptspülen Vorspülen Vorspülen warm Hauptspülen 70°C 2 Klarspülgange lau 1 Klarspülgang warm Aktivtrocknung 15 g 10 g 94 ÷ 104 1,89 18 Vorspülen kalt Hauptspülen 65°C 1 Klarspülgang kalt 1 Klarspülgang warm Aktivtrocknung 20 g 5g 79 ÷ 89 1,15 14 Vorspülen kalt Hauptspülen 50°C 2 Klarspülgange kalt 1 Klarspülgang warm Ak
152981 48/0de 21-01-2003 9:01 Pagina 24 Arbeitsschritte 1. Prüfen Sie, ob die Siebe sauber sind 2. Prüfen Sie, ob Salz und Klarspülmittel vorhanden sind 3. Einordnen des Geschirrs in die Maschine Entfernen Sie grobe Speisereste vom Geschirr. Ziehen Sie den unteren Korb heraus und ordnen Sie darin Töpfe, Teller und Besteck ein. Ziehen Sie den oberen Korb heraus und ordnen Sie darin Teller, Untertassen, Gläser, Tassen usw. ein. Schieben Sie die Körbe nach dem Einordnen wieder in die Maschine zurück. 4.
152981 48/0de 21-01-2003 9:01 Pagina 25 9. Am Ende des Spülprogramms Der Geschirrspüler hält automatisch an und die Kontrolllampe für die beendete Programmphase leuchtet auf, um zu melden, dass das Programm beendet ist. Die Kontrolllampe des soeben beendeten Programms bleibt eingeschalten. Der Geschirrspüler hat das Spülprogramm erst dann beendet, wenn die Kontrolllampe der beendeten Programmphase aufleuchtet.
152981 48/0de 21-01-2003 9:01 Pagina 26 Pflege und Reinigung Auf keinen Fall handelsübliche Möbelpflege- oder aggressive Reinigungsmittel verwenden. ● Bedienteile des Geschirrspülers bei Bedarf nur mit einem weichen Lappen und warmem, klarem Wasser reinigen. ● Sprüharme brauchen nicht gereinigt zu werden. ● Innenbehälter, Türdichtung und Wasserzulauf gelegentlich auf Verschmutzungen kontrollieren und gegebenfalls reinigen.
152981 48/0de 21-01-2003 9:01 Pagina 27 6. Flächensieb (4) aus dem Spülraumboden nehmen und auf beiden Seiten gründlich reinigen. 7. Flächensieb wieder in den Spülraumboden einsetzen. 8. Grob-/Feinsieb in den Mikrofilter einsetzen und zusammenstecken. MA16 4 9. Siebkombination einsetzen und durch Schwenken des Griffs im Uhrzeigersinn bis zum Anschlag verriegeln. Darauf achten, daß das Flächensieb nicht über den Spülraumboden heraussteht. Ohne Siebe darf keinen Fall gespült werden.
152981 48/0de 21-01-2003 9:01 Pagina 28 Was tun, wenn... Versuchen Sie mit Hilfe der hier aufgeführten Hinweise kleinere Störungen am Geschirrspüler selbst zu beheben. Wenn Sie bei einer der hier aufgeführten Störungen oder zu Behebung eines Bedienfehlers den Kundendienst in Anspruch nehmen, erfolgt der Besuch des Kundendienst-Technikers auch während der Garantiezeit nicht kostenlos. ...
152981 48/0de 21-01-2003 9:01 Pagina 29 ...es Probleme beim Betrieb des Geschirrspülers gibt Störung ....die Maschine startet nicht ...das Geschirr wird nicht sauber ...größere Lärmentwicklung während des Betriebs Mögliche Ursache Abhilfe Die Gerätetür ist nicht richtig geschlossen. Schließen Sie die Tür. Der Stecker steckt nicht korrekt in der Steckdose. Stecker richtig einstecken. Das Gerät ist nicht eingeschaltet. Gerät einschalten. Keine Spannung an der Steckdose vorhanden.
152981 48/0de 21-01-2003 9:01 Pagina 30 Das Geschirr wird nicht trocken und bleibt ohne Glanz - Es wurde kein Marken-Klarspüler verwendet. - Vorratsbehälter für den Klarspüler ist leer. - Die Klarspülerdosierung ist zu niedrig eingestellt. Auf Gläsern und Geschirr sind Schlieren, Streifen, milchige Flecken oder blauschimmernder Belag - Klarspülerdosierung niedriger einstellen. Auf Gläsern und Geschirr sind angetrocknete Wassertropfen - Klarspülerdosierung höher einstellen.
152981 48/0de 21-01-2003 9:01 Pagina 31 Technische Daten Abmessungen Breite Höhe mit Arbeitsplatte Höhe ohne Arbeitsplatte max. Tiefe max. Tiefe bei geöffneter Türe Betriebsspannung/Frequenz Leistungsaufnahme Umwälzpumpe Leistungsaufnahme Heizelement Gesamtleistung Leitungswasserdruck 45 cm 85 cm 82 cm 61 cm 115,9 cm 230 V - 50 Hz 200 W 2100 W 2300 W min. max. Fassungsvermögen 50 kPa (0.5 bar) 800 kPa (8 bar) 9 Maßgedecke Dieses Gerät entspricht den folgenden EG Richtlinien: - 73/23/EWG vom 19.
152981 48/0de 21-01-2003 9:01 Pagina 32 Hinweise für Prüfinstitute Vor einer Prüfung muß der Salzbehälter des Entkalkers und der Spülmittelbehälter gefüllt werden. Prüfnorm EN 50242 Vergleichsprogramme: - NORMAL 50° Fassungsvermögen 9 Maßgedecke einschl.
152981 48/0de 21-01-2003 9:01 Pagina 33 Kundendienst Im Kapitel "Abhilfe bei Störungen" sind die wichtigsten Fehlerquellen zusammengestellt, die Sie selbst beheben können. Wenn Sie trotzdem für einen der aufgeführten Hinweise oder aufgrund von Fehlbedienung den Kundendienst in Anspruch nehmen, so erfolgt der Besuch des Kundendienst-Technikers auch während der Garantiezeit nicht kostenlos.
152981 48/0de 21-01-2003 9:01 Pagina 34 Installationsanweisung Arbeitsplatte entfernen Die Maschine läßt sich auch unter eine vorhandene Tischplatte oder unter eine Spülenabdeckung einbauen; hierzu brauchen Sie nur die beiden vorderen Befestigungsschrauben der Arbeitsplatte zu lösen. Arbeitsplatte von vorne nach hinten schieben und abheben. Die Höhe und die Nivellierung durch die Schraubfüße einstellen und das Gerät einbauen.
152981 48/0de 21-01-2003 9:01 Pagina 35 Anschluß des Wasserzulaufschlauches Dieser Geschirrspülautomat ermöglicht einen Anschluß an Kalt- oder Warmwasser bis 60°C. Es ist jedoch empfehlenswert, einen Kaltwasseranschluß zu wählen. Da beim Warmwasseranschluß die Spülzeiten erheblich kürzer werden, könnte das Spülergebnis besonders bei stark verschmutztem Geschirr beeinträchtigt werden.
152981 48/0de 21-01-2003 9:01 Pagina 36 Wichtig! Die Anschlüsse des Zulaufschlauches müssen fest angezogen sein.Prüfen Sie, bevor das Gerät in seine endgültige Position gebracht wird, ob kein Wasser austritt! Auch geringe Mengen können im Laufe der Zeit große Schäden verursachen. Wasserablauf Ablaufschlauch Der Ablaufschlauch darf nicht geknickt, gequetscht oder in sich verschlungen sein. ● Anschluß des Ablaufschlauches: -maximal zulässige Höhe: 1 Meter.
152981 48/0de 21-01-2003 9:01 Pagina 37 Wasserschutzsystem Die Maschine ist mit zwei zusätzlichen Vorrichtungen zum Schutz gegen Wasserüberschwemmung ausgestattet, die folgende Eigenschaften aufweisen: Am Wasserzulaufschlauch (siehe "Anschluß des Wasserzulaufschlauches"); diese Vorrichtung schaltet die Wasserzufuhr bei einer Beschädigung des Zulaufschlauches ab. Die Schutzvorrichtung ist auch im nicht eingeschalten Zustand der Maschine aktiv.
152981 48/0de 21-01-2003 9:01 Pagina 38
152981 48/0de 21-01-2003 9:01 Pagina 39
152981 48/0de 21-01-2003 9:01 Pagina 40 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.