User manual

14
It is possible to deactivate the rinse aid indicator light (see the following
instructions), By default the rinse aid indicator light is active.
To deactivate the rinse aid indicator light be sure that the
dishwasher is off and then proceed as follows:
1. Press INTENSIV 70° and 30 MINUTEN
programme push buttons simultaneously.
2. While keeping the programme push
buttons INTENSIV 70° and 30 MINUTEN
pressed switch on the dishwasher by
pressing the On/Off push button.
The On/Off indicator light comes on.
At the same time, the indicator lights of
the INTENSIV 70° and 30 MINUTEN
push buttons start flashing.
3. Press the 30 MINUTEN push button, the
correspondent indicator light keeps
flashing while the indicator light of the
INTENSIV 70° push button turns off.
At the same time the indicator light
"ENDE" starts to flash.
4. Press the 30 MINUTEN push button again,
the "ENDE" indicator light turns off,
this means that the rinse aid indicator light
has been deactivated.
5. To memorise the operation, switch off the
dishwasher by pressing the On/Off push button.
To reactivate the rinse aid indicator light follow the same
process until the "end of programme" indicator light starts to flash.
If rinse aid refilling is necessary, the rinse aid indicator light will
illuminate only in setting mode and at the end of the washing
programme.
During the run of the programme it will remain off.
SO414
SO416
152975 62/0en 10-01-2003 13:04 Pagina 14