User manual

35
Water outlet connection
The end of the drain hose can be connected as follows:
1. To the sink outlet siphon, securing it if necessary with a clip.
2. To a wall outlet provided with vent-hole, minimum internal diameter 4 cm.
The waste connection must be at a height of between 30 cm (minimum) and 100 cm
(maximum) from the floor.
It makes no difference which way the drain hose faces, either to the right or left of
the dishwasher.
Avoid bending or kinking the hose as this could prevent or slow down the discharge
of water.
Extension hoses
The necessary extension hoses can be obtained from specialist shops or from our
technical assistance centres.
The extension hose must be no longer than 2 metres and its internal diameter must
be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connection to the waste
outlet must be no smaller than the diameter of the drain hose.
Arrange the extension hose horizontally along the floor and allow it to rise only
where it is to be connected to the drain.
CS13
min 30 cm max 100 cm
min 4 cm
Ø 21
Ø 18
1 2
min 30 cm max 100 cm
max 100 cm
+ 2 m max
CS10
Ø 18 Ø 21
152975 62/0en 10-01-2003 13:04 Pagina 35