User manual

USE OF THE APPLIANCE
Switching on the appliance for the first time
1. Switch on the appliance.
2. The display shows the default language: Language English.
• Press the OK touchpad to confirm the default language
• Press one of the menu touchpads to set a different language and then press the OK
touchpad to confirm.
3. The display shows the time message.
4. Press one of the menu touchpads to set the time.
5. Press the OK touchpad.
6. The display goes to 'Programs' area.
Using the appliance
1. Be sure that the set level of the water softener agrees with the water hardness in your
area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing program for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing program.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function.
Refer to 'Multitab function'.
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. Minerals and salts
can have bad effect on the operation of the appliance.
Water hardness is measured in equivalent scales:
• mg/I (millimol per litre)
• ppm (parts per million),
• mmol/l (millimol per litre - international unit for the hardness of water).
Adjust the water softener in to the water hardness in your area. If necessary, contact your
local water authority.
Water hardness Water hardness setting
mg/l ppm mmol/l manually electronically
910 - 1250 910 - 1250 9.1 - 12.5 2 10
760 - 909 760 - 909 7.6 - 9.0 2 9
Use of the appliance 11