Manualshelf

User manual

ManualsBrandsAEG ManualsDomestic AppliancesF34032VI0
11121314151617181920
3. If the washing programme has a prewash phase, put a small quantity of detergent in
the prewash detergent compartment
1
.
4.
If you use the detergent tablets, put the tablet in the detergent dispenser
3
.
5. Close the detergent dispenser. Press the lid until it locks into position.
Different brands of detergent dissolve in different times. Some detergent tablets do not
have the best cleaning results during short washing programmes. Use long washing pro-
grammes when you use the detergent tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the dishes without streaks and stains.
The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.
Press the release button
5
to open the lid
7
of the rinse aid dispenser.
2.
Fill the rinse aid dispenser
4
with rinse aid. The mark 'max' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during
the washing programme.
4. Close the rinse aid dispenser. Press the lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 4.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (highest
dosage).
Turn the rinse aid selector
6
to increase or decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab-
lets can contain other agents.
When you use tablets, that contain salt and rinse aid, do not fill the salt container and rinse
aid dispenser. The rinse aid indicator stays on when the appliance is activated.
Be sure that these tablets are applicable for the water hardness in your area (refer to the
instructions on the packaging of the products).
1. Adjust the water hardness to the lowest level. Refer to 'Setting the water softener'.
2. Set the rinse aid dosage to the lowest position.
Using again separately detergent, salt and rinse aid
1. Fill the salt container and the rinse aid dispenser.
2. Adjust the water hardness to the highest level.
3. Start a washing programme without dishes.
4. When the washing programme is completed, adjust the water softener to the water
hardness in your area.
5. Adjust the quantity of rinse aid.
Use of detergent and rinse aid
13