User manual

Problem Possible cause Possible solution

There are streaks, milky stains,

or a bluish layer on glasses and

dishes.

Rinse aid dosage is too high. Decrease the rinse aid dosage.

Dry water drop stains on

glasses and dishes.

Rinse aid dosage is too low. Increase the rinse aid dosage.

The detergent can be the

cause.

Use a different brand of deter-

gent.

The dishes are wet. You have set a washing pro-

gramme without drying phase

or with a decreased drying

phase.

Let the door stay ajar for some

minutes before you remove the

dishes.

The dishes are wet and dull. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

TECHNICAL DATA

Dimensions Width 596 mm

Height 818-898 mm

Depth 555 mm

Water supply pressure Minimum 0.5 bar (0.05 MPa)

Maximum 8 bar (0.8 MPa)

Water supply

Cold water or hot water maximum 60 °C

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

The rating plate on the inner edge of the appliance door shows the electrical connection

data.

If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic

panels and aeolian), use a hot water supply to decrease energy consumption.

ENVIRONMENT CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

22 Technical data