User manual

• To set the washing programme. Refer to the chapter 'Setting and starting a washing pro-
gramme'.
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To deactivate/activate the audible signals. Refer to the section 'Audible signals'.
• To cancel a washing programme in progress. Refer to the chapter 'Setting and starting a
washing programme'.
Delay start button
Use this button to delay the start of the washing programme with an interval of 3 hours.
Refer to 'Select and start a washing programme'.
Programme lights A and B
These lights have also an auxiliary function when you:
• Adjust the level of the water softener.
• Deactivate/activate the audible signals.
Setting mode
The appliance must be in setting mode for these operations:
• To select and start a washing programme.
• To adjust electronically the level of the water softener.
• To deactivate/activate the audible signals.
Press the on/off button. The appliance is in setting mode when:
• All the programme lights are off and the end-of-programme indicator light flashes.
Press the on/off button. The appliance is not in setting mode when:
• Only one programme light comes on.
– It is necessary to cancel the programme to go back to the setting mode. Refer to 'Set-
ting and starting a washing programme'.
Audible signals
You can hear the audible signals when:
• The washing programme ends.
• The appliance has a malfunction.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme button until the programme light A flashes and the
programme light B comes on.
4. When the programme light A flashes and the programme light B comes on, press im-
mediately the programme button again.
The programme light A comes on and the programme light B starts to flash.
After some seconds the programme light A goes off and the end-of-programme indi-
cator light comes on. (The programme light B continues to flash).
Control panel
9