DE PT Benutzerinformation Geschirrspüler Manual de instruções Máquina de lavar loiça 2 18 FAVORIT34300VIO
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN............................................................................ 3 2. SICHERHEITSANWEISUNGEN................................................................................ 4 3. GERÄTEBESCHREIBUNG.........................................................................................6 4. BEDIENFELD............................................................................................................. 6 5. PROGRAMME..............
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Allgemeine Sicherheit • • • • • • • • • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com • Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. 1.
DEUTSCH • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker.
www.aeg.com • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. 3. GERÄTEBESCHREIBUNG 1 2 11 10 1 2 3 4 5 6 9 8 7 6 5 Oberer Sprüharm Unterer Sprüharm Filter Typenschild Salzbehälter Lüftungsschlitze 7 8 9 10 11 4 3 Klarspülmittel-Dosierer Reinigungsmittelbehälter Besteckkorb Unterkorb Oberkorb 4.
DEUTSCH 7 4.1 Kontrolllampen Kontrolllampe Beschreibung Kontrolllampe des laufenden Programms Leuchtet auf, wenn das Programm startet und erlischt, wenn das Programm endet. Kontrolllampe „Programmende“. Kontrolllampe „Salz“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Klarspülmittel“. Sie erlischt während des Programmbetriebs. 5. PROGRAMME Programm 2) 3) 4) Verschmutzungsgrad Beladung Programmphasen Verbrauchswerte 1) Dauer (Min.
www.aeg.com 5.1 Informationen für Prüfinstitute info.test@dishwasher-production.com Möchten Sie Informationen zum Leistungstest erhalten, schicken Sie eine E-Mail an: Notieren Sie die Produktnummer (PNC), die Sie auf dem Typenschild finden. 6. EINSTELLUNGEN 6.1 Programmwahlmodus und Benutzermodus Wenn sich das Gerät im Programmwahlmodus befindet, kann ein Programm eingestellt und der Benutzermodus aufgerufen werden. Programmwahlmodus.
DEUTSCH Deutsche Wasserhärtegrade (dH°) Französische Wasserhärtegrade (°fH). mmol/l 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 9 Clarke Was- Einstellung für den serhärteWasserenthärter grade 1) Werkseitige Einstellung 2) Verwenden Sie kein Salz bei diesen Werten. Einstellen des Wasserenthärters ist dieser Signalton ausgeschaltet, es ist jedoch möglich, ihn einzuschalten. Das Gerät muss sich im Programmwahlmodus befinden.
www.aeg.com 7. VOR DER ERSTEN INBETRIEBNAHME 1. Prüfen Sie, ob die Einstellung des Wasserenthärters der Wasserhärte in Ihrem Gebiet entspricht. Wenn nicht, stellen Sie die Wasserenthärterstufe ein. 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den KlarspülmittelDosierer. 4. Öffnen Sie den Wasserhahn. 5. Starten Sie ein Programm, um Fertigungsrückstände, die sich möglicherweise noch im Gerät befinden können, zu beseitigen. Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht.
DEUTSCH B A M AX 4 1 3 2 + - C D 11 1. Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den KlarspülmittelDosierer (A) bis zur Markierung „max“. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com Salzbehälter und Klarspülmittel-Dosierer nicht zusätzlich befüllt werden. 1. Stellen Sie den Wasserenthärter auf die niedrigste Stufe ein. 2. Stellen Sie den KlarspülmittelDosierer auf die niedrigste Einstellung. 8.3 Einstellen und Starten eines Programms Starten eines Programms 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die Taste Ein/Aus, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Programmwahlmodus befindet. 3.
DEUTSCH • Nutzen Sie die Körbe immer ganz aus. • Wenn Sie das Gerät beladen, achten Sie darauf, dass das Geschirr komplett von dem Wasser aus den Sprüharmdüsen erreicht und gespült wird. Achten Sie darauf, dass das Geschirr sich weder berührt noch von anderem Geschirr verdeckt wird. • Sie können Geschirrspülreiniger, Klarspüler und Salz separat oder Kombi-Reinigungstabletten (z.B. „3in1“, „4in1“, „All in 1“) verwenden. Befolgen Sie die Anweisungen auf der Verpackung.
www.aeg.com 9.5 Vor dem Starten eines Programms Kontrollieren Sie folgende Punkte: • Die Filter sind sauber und ordnungsgemäß eingesetzt. • Der Deckel des Salzbehälters ist fest geschlossen. • Die Sprüharme sind nicht verstopft. • Geschirrspülsalz und Klarspülmittel sind vorhanden (außer Sie verwenden Kombi-Reinigungstabletten). • Die Geschirrteile sind richtig in den Körben angeordnet. • Das Programm eignet sich für die Beladung und den Verschmutzungsgrad. • Die Reinigungsmittelmenge stimmt. 9.
DEUTSCH 15 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. 4. Reinigen Sie die Filter. ACHTUNG! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 5.
www.aeg.com 10.4 Reinigung des Geräteinnenraums • Reinigen Sie das Gerät und die Gummidichtung der Tür sorgfältig mit einem weichen, feuchten Tuch. • Wenn Sie regelmäßig Kurzprogramme verwenden, können diese zu Fett- und Kalkablagerungen im Gerät führen. Um dieses zu vermeiden, wird empfohlen, mindestens zweimal im Monat Programme mit langer Laufzeit zu verwenden. 11.
DEUTSCH Problem und Alarmcode Mögliche Abhilfe Das Wasserauslauf-Schutzsystem ist eingeschaltet. • Die Kontrolllampe „Programmende“ blinkt dreimal. • Der Signalton ertönt dreimal. • Drehen Sie den Wasserhahn zu und wenden Sie sich an einen autorisierten Kundendienst. Schalten Sie nach der Überprüfung das Gerät aus und wieder ein. Tritt das Problem erneut auf, wenden Sie sich an einen autorisierten Kundendienst.
www.aeg.com ÍNDICE 1. INFORMAÇÕES DE SEGURANÇA........................................................................19 2. INSTRUÇÕES DE SEGURANÇA............................................................................ 20 3. DESCRIÇÃO DO PRODUTO..................................................................................22 4. PAINEL DE COMANDOS....................................................................................... 22 5. PROGRAMAS................................................
PORTUGUÊS 1. 19 INFORMAÇÕES DE SEGURANÇA Leia atentamente as instruções fornecidas antes de instalar e utilizar o aparelho. O fabricante não é responsável por lesões ou danos resultantes de instalação e utilização incorrectas. Guarde sempre as instruções junto do aparelho para futura referência. 1.
www.aeg.com 1.2 Segurança para crianças e pessoas vulneráveis • • • • • Este aparelho pode ser utilizado por crianças com 8 anos ou mais e por pessoas com capacidades físicas, sensoriais ou mentais reduzidas ou com pouca experiência e conhecimento se tiverem recebido supervisão ou instruções relativas à utilização do aparelho de forma segura e compreenderem os perigos envolvidos. Não permita que as crianças brinquem com o aparelho. Mantenha todos os detergentes fora do alcance das crianças.
PORTUGUÊS utilize um fusível de 13 A ASTA (BS 1362). 2.3 Ligação à rede de abastecimento de água • Certifique-se de que não danifica as mangueiras de água. • Antes de ligar o aparelho a canos novos ou canos que não sejam usados há muito tempo, deixe sair água até que saia limpa. • Na primeira utilização do aparelho, certifique-se de que não há fugas de água. • A mangueira de entrada de água possui uma válvula de segurança e um revestimento com um cabo de alimentação no seu interior.
www.aeg.com 3. DESCRIÇÃO DO PRODUTO 1 2 11 10 1 2 3 4 5 6 9 8 7 6 5 Braço aspersor superior Braço aspersor inferior Filtros Placa de características Depósito de sal Ranhura de ventilação 7 8 9 10 11 4 3 Distribuidor de abrilhantador Distribuidor de detergente Cesto de talheres Cesto inferior Cesto superior 4.
PORTUGUÊS 23 4.1 Indicadores Indicador Descrição Indicador de programa em funcionamento. Acende-se quando um programa inicia e apaga-se quando o programa termina. Indicador de fim. Indicador de falta de sal. Está desligado durante o funcionamento dos programas. Indicador de falta de abrilhantador. Está desligado durante o funcionamento dos programas. 5. PROGRAMAS Programa 2) 3) 4) Nível de sujidade Tipo de carga Fases do progra- Valores de consumo ma 1) Duração (min.
www.aeg.com 5.1 Informação para testes info.test@dishwasher-production.com Para obter a informação necessária para testes de desempenho, por favor envie um e-mail para: Anote o número do produto (PNC) indicado na placa de características. 6. PROGRAMAÇÕES 6.1 Modo de selecção de programa e modo de utilizador Quando o aparelho está no modo de selecção de programa, é possível seleccionar um programa e entrar no modo de utilizador. activado.
PORTUGUÊS 25 Graus alemães (°dH) Graus franceses (°fH) mmol/l Graus Clarke Nível do amaciador da água <4 <7 <0,7 <5 1 2) 1) Definição de fábrica. 2) Não utilize sal neste nível. Como regular o nível do amaciador da água Este sinal sonoro está desactivado por predefinição, mas é possível activá-lo. É necessário que o aparelho esteja no modo de selecção de programa. Como activar o sinal sonoro de fim de programa 1.
www.aeg.com 5. Inicie um programa para remover eventuais resíduos de processamento que possam ainda existir no aparelho. Não utilize detergente e não coloque loiça nos cestos. Quando iniciar um programa, o aparelho pode demorar até 5 minutos a recarregar a resina no amaciador da água. Poderá parecer que o aparelho não está a funcionar. A fase de lavagem começa apenas quando este processo terminar. O processo será repetido periodicamente. 7.
PORTUGUÊS CUIDADO! Utilize apenas abrilhantador específico para máquinas de lavar loiça. 27 4. Feche a tampa. Certifique-se de que o botão de libertação fica trancado na posição correcta. Pode rodar o selector de quantidade a libertar (B) entre a posição 1 (menos quantidade) e a posição 4 ou 6 (mais quantidade). 1. Prima o botão de libertação (D) para abrir a tampa (C). 2. Coloque abrilhantador no distribuidor (A) até chegar ao nível “max”. 3.
www.aeg.com 8.3 Seleccionar e iniciar um programa Iniciar um programa 1. Abra a torneira da água. 2. Prima o botão On/Off (ligar/desligar) para activar o aparelho. Certifique-se de que o aparelho está no modo de selecção de programa. 3. Prima o botão de programa repetidamente até que o indicador do programa que pretende seleccionar se acenda. 4. Feche a porta do aparelho para iniciar o programa. aparelho pára de funcionar. Quando fechar a porta, o aparelho continua a partir do ponto de interrupção.
PORTUGUÊS pastilhas combinadas, pode seleccionar a opção Multitab (se disponível). Esta opção melhora os resultados de lavagem e secagem quando se utilizam pastilhas combinadas. • Seleccione o programa de acordo com o tipo de carga e o grau de sujidade. Com o programa ECO, terá o consumo de água e energia mais eficiente para faianças e talheres com sujidade normal. 9.2 Utilizar sal, abrilhantador e detergente • Utilize apenas sal, abrilhantador e detergente próprios para máquina de lavar loiça.
www.aeg.com 9.6 Descarregar os cestos 1. Deixe a loiça arrefecer antes de a retirar do aparelho. A loiça quente danifica-se facilmente. 2. Esvazie primeiro o cesto inferior e só depois o cesto superior. No fim do programa, pode ainda existir água nas partes laterais e na porta do aparelho. 10. MANUTENÇÃO E LIMPEZA ADVERTÊNCIA! Antes de qualquer acção de manutenção, desactive o aparelho e desligue a ficha da tomada eléctrica.
PORTUGUÊS 31 CUIDADO! Uma posição incorrecta dos filtros pode causar resultados de lavagem insatisfatórios e danos no aparelho. 10.2 Limpar os braços aspersores Não retire os braços aspersores. Se os orifícios dos braços aspersores ficarem obstruídos, retire a sujidade com um objecto fino e afiado. 5. Certifique-se de que não há resíduos de alimentos ou sujidade dentro e à volta da borda do colector. 6. Reinstale o filtro plano (A). Certifique-se de que fica posicionado correctamente debaixo das 2 guias.
www.aeg.com 11. RESOLUÇÃO DE PROBLEMAS Se o aparelho parar durante o funcionamento ou não iniciar, tente resolver o problema com a ajuda da informação da tabela antes de contactar um Centro de Assistência Técnica Autorizado. No caso de alguns problemas, o indicador de fim pisca para indicar uma anomalia. Problema e código de alarme Solução possível Não consegue activar o aparelho. • Certifique-se de que a ficha está ligada na tomada eléctrica.
PORTUGUÊS Após verificar o aparelho, desligue-o e volte a ligá-lo. Se o problema voltar a ocorrer, contacte um Centro de Assistência Técnica Autorizado. 33 No caso de surgir algum código de alarme que não esteja na tabela, contacte um Centro de Assistência Técnica Autorizado. 12. INFORMAÇÃO TÉCNICA Dimensões Largura / Altura / Profundidade (mm) 596 / 818-898 / 555 Ligação eléctrica 1) Tensão (V) 220-240 Frequência (Hz) 50 Pressão do fornecimento de água Mín. / Máx. bar (MPa) 0.5 (0.05) / 8 (0.
www.aeg.
PORTUGUÊS 35
156980581-A-352014 www.aeg.