FAVORIT45013WO EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • • • 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. • Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
ENGLISH 2.1 Disposal WARNING! Risk of injury or suffocation. 5 • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance. • Disconnect the appliance from the mains supply. 3. CONTROL PANEL 1 2 8 3 7 6 4 5 1 Off position 2 Programme marker 3 Indicators 4 Display 5 Start button 6 Delay button 7 Multitab button 8 Programme knob Indicators The indicator comes on when the washing and rinsing phases operate.
www.aeg.com 4. PROGRAMMES Programme1) 2) 3) 4) 5) 6) Degree of soil Programme Type of load phases Duration (min) Energy (kWh) Water (l) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 140 150 1.6 - 1.8 14 - 15 All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry 90 - 130 1.1 - 1.7 11 - 12 Fresh soil Crockery and cutlery Wash 60 °C Rinse 30 0.8 8 All Prewash 12 0.
ENGLISH 7 5. OPTIONS 5.1 Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase. Activating the Multitab function Activate or deactivate the Multitab function before the start of a programme. You cannot activate or deactivate this function while a programme operates. 1.
www.aeg.com Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically.
ENGLISH 9 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme.
www.aeg.com 7. DAILY USE 1. Open the water tap. 2. Turn the programme knob until the programme marker is aligned with a programme on the control panel. Make sure that the appliance is in setting mode, refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. • If you use the combi detergent tablets, activate the Multitab option 5.
ENGLISH 7.2 Setting and starting a programme Setting mode The appliance must be in setting mode to: • Start a programme. • Set the level of the water softener. • Activate the rinse aid dispenser when the Multitab function is on. Turn the programme knob until the programme marker is aligned with a programme on the control panel: • If the programme duration flashes in the display, the appliance is in setting mode.
www.aeg.com gramme marker is aligned with the off position. 2. Close the water tap. • If you do not deactivate the appliance, after three minutes from the end of the programme: – All the indicators go off. – The display shows one horizontal status bar. This helps to decrease the energy consumption. Press one of the buttons, the display and the indicators come on again. • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged.
ENGLISH • Put the light items in the upper basket. Make sure that they do not move. • Make sure that the spray arms can move freely before you start a programme. 8.4 Before starting a programme Make sure that: • The filters are clean and correctly installed. 13 • The spray arms are not clogged. • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used.
www.aeg.com 6. 7. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms 9.4 Internal cleaning Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
ENGLISH Problem 15 Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. The appliance does not drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. The anti-flood device is on.
www.aeg.com 7. To confirm the setting, turn the programme knob until the programme marker is aligned with the off position. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate. Voltage 600 / 850 / 610 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) Water supply 1) Cold water or hot water2) Capacity Place settings 12 Power consumption Left-on mode 0.99 W Off-mode (0.5 / 0.05 ) / (8 / 0.8 ) max.
ENGLISH 17
www.aeg.
ENGLISH 19
156966140-A-062013 www.aeg.
