User manual

ManualsBrandsAEG ManualsDishwashersF54030VI0

• The quality of the detergent can be

the cause.

Dishes are wet

• The programme is without a drying

phase or with a low temperature dry-

ing phase.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the

cause.

• The quality of the combi detergent

tablets can be the cause. Try a differ-

ent brand or activate the rinse aid dis-

penser and use rinse aid together with

the combi detergent tablets.

Refer to ‘HINTS AND TIPS’ for

other possible causes.

Electronic adjustment

1. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode. Refer to

‘SETTING AND STARTING A PRO-

GRAMME’.

2. Press and hold function buttons (B)

and (C) at the same time until the in-

dicators of function buttons (A), (B)

and (C) start to flash.

3. Press function button (A).

• The indicators of function buttons

(B) and (C) go off.

• The indicator of function button (A)

continues to flash.

• Intermittent acoustic signals oper-

ate and the end indicator flashes

showing the current setting of the

water softener.

– The number of flashes of the

end indicator and the number of

the acoustic signals show the

level of the water softener.

E.g. 5 acoustic signals and 5

flashes + pause + 5 acoustic sig-

nals and 5 flashes = level 5.

4. Press function button (A) again and

again to change the setting. Each

time you press function button (A)

you go to the next level.

5. Deactivate the appliance to confirm

the setting.

11. TECHNICAL INFORMATION

Dimensions Width / Height / Depth

(mm)

596 / 818 - 898 / 555

Electrical connection Refer to the rating plate.

Voltage 220-240 V

Frequency 50 Hz

Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )

Water supply

Cold water or hot water

max. 60 °C

Capacity Place settings 12

Power consumption Left-on mode 0.99 W

Off-mode 0.10 W

Connect the water inlet hose to a water tap with a 3/4'' thread.

If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian

energy), use the hot water supply to decrease energy consumption.