User manual

12
The setting of a new level must occur with the dishwasher switched off.
To set a different level, proceed as follows:
1. Press simultaneously and keep pressed the "INTENSIV 70°" and "NORMAL
65°" programme push buttons.
2. Press the On/Off push button.
3. Always keeping pressed the "INTENSIV 70°" and "NORMAL 65°"
programme push buttons wait about 5 seconds until the indicator light
of the programme which corresponds to the current level comes on.
4. Press the "INTENSIV 70°" push button as many times as necessary until
the indicator light of the programme corresponding to the new level
comes on. 5 seconds after this push button has last been pressed the
dishwasher memorises the level selected and returns to the programme
setting mode.
SO271
If your water hardness is level 1 it is already soft and therefore there is
no need to use salt. With the setting of the water softener at level 0 the
salt indicator light on the control panel will always remain off.
Water hardness
°dH
(german degrees)
°TH
(french degrees)
PPM
(parts per million)
Use of saltLevel
1
2
3
4
5
0 - 4
5 - 11
12 - 22
23 - 39
40 - 50
0 - 8
9 - 20
21 - 40
41 - 70
71 - 90
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
NO
YES
YES
YES
YES
152983 78/0en 12-01-2000 10:49 Pagina 12