User manual

34
Building-in
This dishwasher is designed to be fitted under a kitchen counter or
worksurface.
It is essential that the recess dimensions indicated in the diagram are
followed.
No further openings for venting of the dishwasher are required, but only to
let the water fill and drain hose and power supply cable pass through.
The recess height may be anywhere between 820 and 880 mm from the floor
as the dishwasher incorporates adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the top of the dishwasher
and the counter top.
Adjusting the height of the appliance
To adjust the height proceed as follows:
1. Loosen or tighten the two front feet.
2. The rear foot is adjusted by turning the screw in the middle of the front
kick plate to the left or right.
450
+
-
820
880
÷
818
878
÷
II98
446
575
max
550
max
152983 78/0en 12-01-2000 10:50 Pagina 34