User manual

39
Securing under a counter
Secure the dishwasher to the counter on
the front part by means of two 3.5 x 16
screws provided (see fig. - point A).
The dishwasher must be secured against
tilting. Therefore, make sure that the
counter it is fitted under, is suitably
secured to a fixed structure (adjacent
kitchen cabinets, wall).
Attention!
The sides of the dishwasher must never be drilled to prevent damage to
hydraulic components.
Adjusting the door balance
After the door panel, the adjustment of the door balance may be necessary.
The door of the dishwasher is balanced when it is open in any position.
For this purpose use the two front screws.
- Open the door.
- Remove the caps and screw or unscrew
the screws. In this way the tension of
the door balancing springs is increased
or decreased respectively.
- Insert the caps again.
Important!
The weight of the panel should be within the limits given in "The
furniture door" otherwise balancing the door will not be possible
A
II100
45°
II102
152983 78/0en 12-01-2000 10:50 Pagina 39