FAVORIT 34030VI EN DISHWASHER USER MANUAL
www.aeg.com CONTENTS 4 6 7 8 9 10 13 16 17 19 SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES OPTIONS BEFORE FIRST USE DAILY USE CARE AND CLEANING TROUBLESHOOTING TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
www.aeg.com SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • The water inlet hose has a safety valve and a sheath with an inner mains cable. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH USE • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position.
www.aeg.
ENGLISH CONTROL PANEL A 1 5 B 2 4 3 1 On/off button 4 Programme button 2 Programme indicators 5 Delay button 3 Indicators Indicators Description End indicator. Wash indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates.
www.aeg.com PROGRAMMES Programme1) 2) 3) 4) Degree of soil Programme Type of load phases Duration (min) Energy (kWh) Water (l) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 120-130 1.8-2.0 22-24 Normal soil Crockery and cutlery Prewash Wash 65 °C Rinses Dry 100-110 1.4-1.6 19-21 Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 130-140 1.0-1.2 14-16 All Prewash 12 0.
ENGLISH OPTIONS ACOUSTIC SIGNALS The acoustic signals operate in these conditions: • When the programme is completed. • A malfunction occurs to the appliance. Factory setting: on. You can deactivate the acoustic signals. Deactivating the acoustic signals 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3.
www.aeg.com BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. appliance and bad washing results.
ENGLISH 11 Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold the programme button until the programme indicator (A) flashes and the programme indicator (B) comes on. 4.
www.aeg.com FILLING THE RINSE AID DISPENSER A D CAUTION! Only use rinse aid for dishwashers. Other products can cause damage to the appliance. B The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. C B A M AX 4 3 2 1 + Press the release button (D) to open the lid (C). 2. Fill the rinse aid dispenser (A), no more than the mark 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid.
ENGLISH 13 DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and soil.
www.aeg.com CAUTION! Use only detergents for dishwashers. D A B 1. 30 20 2. 3. C 4. A 30 B D 5. Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). If you use detergent tablets, put the tablet in the compartment (A). Close the lid. Make sure that the release button locks into position.
ENGLISH Starting a programme without delay start 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. 3. Press continuously the programme button until the indicator of the programme you want to set comes on. 4. Close the appliance door. The programme starts. Starting a programme with delay start 1. Set the programme. 2. Press the delay button to delay the start of the programme of 3 hours. The delay indicator comes on. 3.
www.aeg.com CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS 1. 2. C A B 3. 4. 5. 6. A1 A2 CLEANING THE SPRAY ARMS Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
ENGLISH 17 TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the service. With some problems, some indicators flash continuously and/or intermittently at the same time to show an alarm code. Alarm code Problem • The indicator of the set programme flashes continuously. • The end indicator flashes 1 time intermittently. The appliance does not fill with water.
www.aeg.com Problem Possible cause Possible solution The appliance does not drain the water. The sink spigot is clogged. Clean the sink spigot. The water drain hose has a kink or a bend. Make sure that the position of the hose is correct. After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If other alarm codes show, contact the Service.
ENGLISH Problem Whitish streaks and stains or bluish layers on glasses and dishes. Dry water drop stains on glasses and dishes. 19 Possible cause Possible solution The set level of the water softener is incorrect. Make sure that the set level of the water softener agrees with the water hardness in your area. The cap of the salt container is loose. Tighten the cap. The released quantity of rinse aid is too much. Decrease the released quantity of rinse aid .
www.aeg.