FAVORIT 34030VI EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • The first time you use the appliance, make sure that there is no leakage. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 1.
www.aeg.com mains plug, use a 13 amp ASTA (BS 1362) fuse. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance.
ENGLISH 2. PRODUCT DESCRIPTION 1 2 11 10 9 8 7 6 5 4 3 1 Upper spray arm 7 Rinse aid dispenser 2 Lower spray arm 3 Filters 8 Detergent dispenser 4 Rating plate 10 Lower basket 5 Salt container 11 Upper basket 9 Cutlery basket 6 Water hardness dial 3. CONTROL PANEL A 1 5 B 2 4 3 1 On/off button 4 Programme button 2 Programme indicators 5 Delay button 3 Indicators Indicators Description End indicator.
www.aeg.com Indicators Description Wash indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates. 4. PROGRAMMES Programme1) 2) 3) 4) Degree of soil Type of load Programme phases Duration Energy Water (min) (kWh) (l) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 120-130 1.8-2.0 22-24 Normal soil Crockery and cutlery Prewash Wash 65 °C Rinses Dry 100-110 1.4-1.
ENGLISH 7 5. OPTIONS 5.1 Acoustic signals The acoustic signals operate in these conditions: • When the programme is completed. • A malfunction occurs to the appliance. Factory setting: on. You can deactivate the acoustic signals. Deactivating the acoustic signals 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3.
www.aeg.com Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.
ENGLISH 9 6.2 Filling the salt container CAUTION! Only use dishwasher salt. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt.
www.aeg.com 7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and soil. 7.
ENGLISH CAUTION! Use only detergents for dishwashers. D A B 1. 30 20 2. 3. C 4. A 30 B 11 D 5. Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). If you use detergent tablets, put the tablet in the compartment (A). Close the lid. Make sure that the release button locks into position. 20 32 - 1 4 MAX + C 7.
www.aeg.com Starting a programme without delay start 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. 3. Press continuously the programme button until the indicator of the programme you want to set comes on. 4. Close the appliance door. The programme starts. Starting a programme with delay start 1. Set the programme. 2. Press the delay button to delay the start of the programme of 3 hours. The delay indicator comes on. 3.
ENGLISH 13 8.1 Cleaning the filters 1. Turn the filter (A) counterclockwise and remove it. 2. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). C A B A1 3. 4. 5. A2 6. Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks.
www.aeg.com Alarm code Problem • The indicator of the set programme flashes continuously. • The end indicator flashes 1 time intermittently. The appliance does not fill with water. • The indicator of the set programme The appliance does not drain the waflashes continuously. ter. • The end indicator flashes 2 times intermittently. • The indicator of the set programme The anti-flood device is on. flashes continuously. • The end indicator flashes 3 times intermittently.
ENGLISH After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. 15 If other alarm codes show, contact the Service. 9.1 The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean. The filters are clogged. Clean the filters. The filters are not correctly assembled and installed.
www.aeg.com Problem Possible cause Possible solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. The released quantity of rinse aid was not sufficient . Increase the released quantity of rinse aid. The quality of the detergent can be the cause. Try a different brand of detergent. The dishes are wet. The programme had no drying phase. Set a programme with the drying phase.
ENGLISH appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.aeg.
ENGLISH 19
156959291-A-222012 www.aeg.
