FAVORIT 55210 SQ ENËLARËSE UDHËZIMET PËR PËRDORIM
PËR REZULTATE TË SHKËLQYERA Faleminderit që zgjodhët këtë produkt AEG. Këtë produkt e kemi prodhuar që të ketë performancë të plotë për shumë vite, duke u bazuar në teknologji inovative që e bëjnë jetën më të thjeshtë – karakteristika të cilat mund të mos i gjeni në pajisjet e zakonshme. Ju lutemi kushtojini pak minuta lexim për të marrë maksimumin prej këtij produkti.
Përmbajtja 3 PËRMBAJTJA 4 5 6 8 8 9 10 11 13 14 15 17 18 20 20 21 23 24 Të dhëna për sigurinë Përshkrim i produktit Paneli I kontrollit Përdorimi i pajisjes Vendosja e zbutësit të ujit Përdorimi I kripës në enëlarëse Përdorimi I lëndës shpëlarëse Mbushja e enëlarëses me takëme dhe enë Përdorimi I detergjentit Programet e larjes Përzgjedhja dhe startimi I një programi larës Kujdesi dhe pastrimi Si të veprojmë nëse… Të dhëna teknike Instalimi Lidhja e ujit Lidhja elektrike Probleme që lidhen me mjedisin N
Të dhëna për sigurinë TË DHËNA PËR SIGURINË Lexoni me kujdes këtë manual para instalimit dhe përdorimit të pajisjes. Kjo është në interes të sigurisë suaj dhe për të siguruar funksionimin e duhur. Mbajini këto udhëzime dhe sigurohuni që të jenë me pajisjen kur ajo zhvendoset ose shitet. Të gjithë personat që përdorin pajisjen duhet të dinë plotësisht për funksionimin e saj dhe veçoritë e sigurisë. Përdorimi i rregullt • • • • • • • • • • Pajisja është ndërtuar vetëm për përdorim shtëpiak.
Përshkrim i produktit 5 • Mbajini fëmijët larg nga pajisja kur dera është e hapur. Instalimi • Sigurohuni që pajisja të mos dëmtohet nga transporti. Mos lidhni një pajisje të dëmtuar. Kontaktoni furnizuesin nëse është e domosdoshme. • Hiqni të gjithë paketimin para përdorimit të parë. • Instalimin elektrik duhet ta kryejë një person i kualifikuar dhe kompetent. • Instalimin hidraulik duhet ta kryejë një person i kualifikuar dhe kompetent. • Mos i ndryshoni specifikimet e mos e modifikoni këtë produkt.
Paneli I kontrollit 1 2 3 4 5 6 Krahët spërkatës Mikrofiltri Foleja e detergjentit Foleja e shpëlarësit Filtri i sheshtë Mbajtësi i kripës Etiketa e të dhënave është në pjesën e prapme të pajisjes.
Paneli I kontrollit 7 Dritat treguese Drita treguese ndizet kur është në proces faza e tharjes. Drita treguese ndizet kur programi larjes ka përfunduar. 1) 1) Drita treguese ndizet kur është e nevojshme të mbushet kutia e kripës. Referojuni kapitullit 'Përdorimi I kripës në enëlarëse'. Drita treguese e kripës mund të qëndrojë ndezur për disa orë, kjo nuk ndikon negativisht në procesin e punës së pajisjes. Drita treguese ndizet kur është e nevojshme të shtoni shpëlarësin.
Përdorimi i pajisjes Regjimi i vendosjes Pajisja është në modalitetin e përzgjedhjes kur të gjitha dritat treguese të programeve janë të ndezura. Pajisja duhet të jetë në modalitetin e përzgjedhjes për këto procese: – Për të vendosur një program larjeje. – Për të vendosur nivelin e zbutësit të ujit. Nëse drita treguese e një programi është e ndezur, anuloni programin për t'u kthyer në modalitetin e përzgjedhjes. Referojuni kapitullit 'Përzgjedhja dhe fillimi i një programi larës'.
Përdorimi I kripës në enëlarëse Fortësia e ujit °dH mmol/l °TH Clarke Përcaktimi i fortësisë së ujit 4- 12 0.7- 2.1 7- 19 5 -13 2 <4 < 0.7 <7 <5 1 1) 9 Niveli i ekranit numerik 1) Nuk kërkohet përdorimi i kripës. Përshtatja elektronike Zbutësi i ujit vendoset në fabrikë në nivelin 3. 1. Ndizni pajisjen. 2. Sigurohuni që pajisja të jetë në modalitetin e përzgjedhjes. 3.
Përdorimi I lëndës shpëlarëse 3. Përdorni hinkën për të mbushur mbajtësin e kripës me kripë. 4. Hiqni kripën rreth hapjes së mbajtësit të kripës. 5. Shtrëngoni kapakun te mbajtësi i kripës. Është e zakonshme që uji të dalë nga mbajtësi kur e mbushni me kripë. Kur vendosni zbutësin e ujit në nivelin 1, drita treguese e kripës nuk qëndron e ndezur. PËRDORIMI I LËNDËS SHPËLARËSE KUJDES Përdorni vetëm shpëlarës origjinalë të përshtatshëm për enëlarëse.
Mbushja e enëlarëses me takëme dhe enë 11 Ndiqni këta hapa për të mbushur folenë e shpëlarësit: 1. Shtypni dhe lëshoni butonin (A) për të hapur folenë e shpëlarësit. 2. Mbushni folenë e shpëlarësit me shpëlarës. Niveli maksimal tregohet nga shenja "max". 3. Hiqni shpëlarësin e derdhur me një leckë thithëse për të parandaluar formimin e shkumës gjatë programit pasardhës të larjes. 4. Mbyllni folenë e shpëlarësit Kapaciteti i folesë së shpëlarësit është afro 150 ml.
Mbushja e enëlarëses me takëme dhe enë – Zbutini mbetjet e djegura të ushqimit në tiganë. • Ndërsa futni takëmet dhe enët, ndiqni këto hapa: – Futni artikuj bosh si (p.sh. filxhanë, gota dhe tiganë) me pjesët e hapura me drejtim poshtë. – Sigurohuni që uji nuk grumbullohet në mbajtës ose në bazën e thellë. – Sigurohuni që takëmet dhe enët të mos futen tek njëra-tjetra. – Sigurohuni që takëmet dhe enët të mos mbulojnë takëme dhe enë të tjera. – Sigurohuni që gotat të mos prekin gotat e tjera.
Përdorimi I detergjentit • thikat me dorezat lart. Koshi i takëmeve ka një rrjetë të lëvizshme për takëmet. Mos lini që takëmet të puthiten me njëra-tjetrën. Sigurohuni që krahu spërkatës të mund të lëvizë lirisht përpara se të mbyllni derën. PËRDORIMI I DETERGJENTIT Përdorni vetëm detergjent (pudër, lëng ose tableta) që përdoren për larëset e enëve. Ndiqni të dhënat në paketim: • Dozimi i rekomanduar nga prodhuesi. • Rekomandimet e ruajtjes.
Programet e larjes 1. Sigurohuni që tabletat e detergjentit të jenë të përdorshme për fortësinë e ujit tuaj. Referojuni udhëzimeve nga prodhuesi. 2. Vendosni nivelet më të ulëta të fortësisë së ujit dhe dozimit të shpëlarësit. Nuk është e domosdoshme të mbushni mbajtësin e kripës dhe folenë e shpëlarësit. Ndiqni këto hapa kur rezultatet e tharjes nuk janë të kënaqshme: 1. Mbushni folenë e shpëlarësit me shpëlarës. 2. Të vendosni dozimin e shpëlarësit në pozicionin 2.
Përzgjedhja dhe startimi I një programi larës Programi 30 MIN Niveli i ndotjes Ndotje normale ose e lehtë Ndotje normale Lloji i ngarkesës Enë prej fajance dhe takëme Enë prej fajance dhe takëme Përshkrimi i pajisjes 15 Opsioni Kursimi i energjisë1) Larja kryesore deri në 50°C 1 shpëlarje e ndërmjetme Shpëlarja përfundimtare E zgjedhshm e, pa ndikim në programin larës.
Përzgjedhja dhe startimi I një programi larës – Drita treguese e programit do të ndizet. – Të gjitha dritat treguese të programeve do të fiken. – Ekrani dixhital tregon kohëzgjatjen e programit duke pulsuar. – Drita treguese e fazës përkatëse për programin e larjes fillon të pulsojë. 4. Mbyllni derën. – Programi i larjes do të fillojë automatikisht. – Drita treguese e fazës përkatëse për programin e larjes ndizet. Ndërsa programi i larjes është në proces, nuk mund ta ndryshoni programin.
Kujdesi dhe pastrimi 17 Mos e hapni derën gjatë numërimit poshtë nëse nuk është e domosdoshme. Kjo parandalon ndërprerjen e numërimit poshtë. Kur e mbyllni përsëri derën numërimi poshtë vazhdon nga pika e ndërprerjes. Anuloni një fillim me vonesë: 1. Shtypni dhe mbani shtypur butonat e funksionit B dhe C derisa të gjitha dritat e programeve të ndizen. – Kur anuloni shtyrjen e programit, anuloni gjithashtu programin e larjes. 2. Vendosni një program të ri larjeje.
Si të veprojmë nëse… Pajisja ka 2 filtra: 1. mikrofiltri 2. filtri i sheshtë Ndiqni këta hapa për të pastruar filtrat: 1. Hapni derën. 2. Nxirrni koshin. 3. Nxirrni filtrat në bazamentin e pajisjes. 4. Lajini filtrat nën ujë të rrjedhshëm. 5. Rivendosni filtrat. 6. Rrotullojeni mikrofiltrin në drejtim orar për ta mbërthyer. Pastroni krahun spërkatës Kontrollojeni rregullisht krahun spërkatës Hiqni copëzat e ushqimit nga vrimat në krahun spërkatës.
Si të veprojmë nëse… 19 KUJDES Fikeni pajisjen përpara se të kryeni veprimet e rregullimit që sugjerohen më poshtë. Kodi i defektit dhe keqfunksionimi Shkaku i mundshëm dhe zgjidhja • do të shfaqet në ekranin elektronik. Enëlarësja nuk mbushet me ujë • Rubineti i ujit është bllokuar ose i veshur me gëlqere. Pastroni rubinetin e ujit. • Rubineti i ujit është i mbyllur. Hapni rubinetin e ujit. • Filtri në tubin e hyrjes së ujit është bllokuar. Pastroni filtrin.
Të dhëna teknike Numri serial : .......... Rezultatet e pastrimit nuk janë të kënaqshme Enët nuk janë të pastra • Programi i zgjedhur i larjes nuk është i duhuri për llojin e ngarkesës dhe ndotjes. • Shporta është mbushur jo si duhet dhe uji s'mund të arrijë të gjitha sipërfaqet. • Krahu i spërkatjes nuk rrotullohet lirisht për shkak të vendosjes të pasaktë të ngarkesës. • Filtrat janë pis ose nuk janë instaluar si duhet. • Sasia e detergjentit është shumë e vogël ose mungon.
Lidhja e ujit 21 Kur e vendosni pajisjen në vend, sigurohuni që tubat e ujit të mos jenë përdredhur ose shtypur. Pajisja është parashikuar që të instalohet në një lavapjatës kuzhine, sipërfaqe të sheshtë në kuzhinë ose e ndërfutur. Pozicionimi Ju mund ta instaloni larëse e enëve në orenditë e kuzhinës. Sigurohuni që dimensionet e vendit të jenë të njëjta me ato të dhëna në figurë. Sigurohuni që ka vend të hapur në mobilie për tubin e hyrjes së ujit, tubin e daljes së ujit dhe kabllon elektrike.
Lidhja e ujit Lidhni zorrën në një rubinet uji me një fileto të jashtme prej 3/4”. Nëse zorra e hyrjes së ujit është shumë e shkurtër, zëvendësojeni zorrën e hyrjes së ujit me një zorrë të përshtatshme, të gjatë me presion të lartë. Mos lidhni një zgjatues zorre. Për t’iu përshtatur instalimit, është e mundur të ktheni fundin e zorrës që lidhet me enëlarësen. Ndiqni këta hapa : 1. Lironi dadon shtrënguese. 2. Ktheni zorrën. 3. Shtrëngoni dadon shtrënguese.
Lidhja elektrike ka 2 procedura për të instaluar tubin e kullimit të ujit: 1. Fiksoni bërrylin plastik në ekstremitetin e tubit. Vendosni tubin e kullimit të ujit në lavapjatë. 2. Lidheni tubin e kullimit të ujit me sistemin e kullimit të ujit. Tubi duhet të jetë më pak se 75 cm mbi bazamentin e enëlarëses, për të parandaluar përdorimin e pasaktë të pajisjes. Nëse e lidhni zorrën e kullimit të ujit në një rubinet nën lavaman, hiqni membranën plastike (A).
Probleme që lidhen me mjedisin PROBLEME QË LIDHEN ME MJEDISIN Materialet paketuese janë të padëmshme për ambientin dhe mund të riciklohen. Elementët plastikë identifikohen nga shenjat, p.sh. >PE<, >PS<, etj. Mënjanoni materialet paketues në vendgrumbullimin e plehrave të lagjes tuaj. PARALAJMËRIM Për të hedhur një pajisje, ndizni këtë procedurë: • Hiqni spinën nga priza. • Priteni kabllon e ushqimit dhe spinën dhe hidhini ato. • Çmontoni mbërtheckën e derës.
www.aeg-electrolux.