DE Benutzerinformation Geschirrspüler FAVORIT55350VI1
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................... 4 3. GERÄTEBESCHREIBUNG...............................................................................................6 4. BEDIENFELD................................................................................................................... 7 5.
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.aeg.com • • • • • • • • Beachten Sie, dass die Höchstzahl an Maßgedecken 13 beträgt. Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden. Stellen Sie Messer und Besteck mit scharfen Spitzen mit der Spitze nach unten in den Besteckkorb oder legen Sie sie waagerecht in das Gerät.
DEUTSCH • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist.
www.aeg.com • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. 3. GERÄTEBESCHREIBUNG 1 2 11 10 1 2 3 4 5 6 9 8 7 Oberer Sprüharm Unterer Sprüharm Filter Typenschild Salzbehälter Lüftungsschlitze 3.1 Beam-on-Floor Der Beam-on-Floor ist ein Lichtstrahl, der unterhalb der Gerätetür auf den Küchenboden projiziert wird.
DEUTSCH 4. BEDIENFELD 1 1 2 3 4 5 2 3 Taste „Ein/Aus“ Display Taste Delay Programmtaste (nach oben) Programmtaste (nach unten) 4 6 7 8 9 5 6 7 8 9 Taste XtraDry Taste TimeSaver Taste Reset Kontrolllampen 4.1 Kontrolllampen Kontrolllampe Beschreibung Kontrolllampe Klarspülmittel. Sie erlischt während des Programmbetriebs. Kontrolllampe Salz. Sie erlischt während des Programmbetriebs. 5.
www.aeg.com Programm Verschmutzungsgrad Beladung P4 4) • Vor Kurzem be- • Hauptspülgang 60 °C nutztes Geschirr oder 65 °C • Geschirr und Be- • Spülgänge steck • Alle P5 Programmphasen Optionen • XtraDry • Vorspülen 5) 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. (Dies ist das Standardprogramm für Prüfinstitute.) 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
DEUTSCH 5.2 Informationen für Prüfinstitute 9 info.test@dishwasher-production.com Möchten Sie Informationen zum Leistungstest erhalten, schicken Sie eine E-Mail an: Notieren Sie die Produktnummer (PNC), die Sie auf dem Typenschild finden. 6. EINSTELLUNGEN 6.1 Programmwahlmodus und Benutzermodus Wenn sich das Gerät im Programmwahlmodus befindet, kann ein Programm eingestellt und der Benutzermodus aufgerufen werden.
www.aeg.com Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Was- Einstellung für den serhärtegra- Wasserenthärter de 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Werkseitige Einstellung. 2) Verwenden Sie kein Salz bei diesen Werten.
DEUTSCH – = Klarspülmittelnachfüllanzeige ausgeschaltet. zum Ändern der 3. Drücken Sie Einstellung. 4. Drücken Sie die Taste Ein/Aus zur Bestätigung der Einstellung. 1. Halten Sie zum Aufrufen des Benutzermodus gleichzeitig gedrückt, bis die Kontrolllampen 2. Drücken Sie . • Die Kontrolllampen erlöschen. Bei einer Störung des Geräts ertönen akustische Signale. Es ist nicht möglich, diese Signaltöne auszuschalten. blinkt • Die Kontrolllampe weiter.
www.aeg.com Trockenergebnisse können beeinträchtigt werden. Das Display zeigt die aktualisierte Programmdauer an. Einschalten von TimeSaver Drücken Sie , die entsprechende Kontrolllampe leuchtet auf. 8. VOR DER ERSTEN INBETRIEBNAHME 1. Prüfen Sie, ob die Einstellung des Wasserenthärters der Wasserhärte in Ihrem Gebiet entspricht. Wenn nicht, stellen Sie die Wasserenthärterstufe ein. 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den KlarspülmittelDosierer. 4. Öffnen Sie den Wasserhahn. 5.
DEUTSCH 8.2 Füllen des KlarspülmittelDosierers A D B C B A 4 1 3 2 ACHTUNG! Verwenden Sie ausschließlich Klarspülmittel für Geschirrspüler. 1. Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den KlarspülmittelDosierer (A) bis zur Markierung „max“. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com A 30 B anschließend erscheint die Programmdauer. 4. Stellen Sie die verfügbaren Optionen ein. 5. Schließen Sie die Gerätetür, um das Programm zu starten. D 20 C Starten eines Programms mit Zeitvorwahl 1. Wählen Sie ein Programm. 1. Drücken Sie die Entriegelungstaste (B), um den Deckel (C) zu öffnen. 2. Füllen Sie das Reinigungsmittel ein oder legen Sie eine Reinigungstablette in das Fach (A). 3.
DEUTSCH Beenden des Programms Halten Sie Reset gedrückt, bis sich das Gerät im Programmwahlmodus befindet. Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. 15 1. Drücken Sie die Taste Ein/Aus oder warten Sie, bis das Gerät über die Funktion AUTO OFF automatisch ausgeschaltet wird. 2. Schließen Sie den Wasserhahn. Programmende Wenn das Programm beendet ist, zeigt das Display 0:00 . 10. TIPPS UND HINWEISE 10.
www.aeg.com Reinigungsmittel, Salz und Klarspülmittel zu kehren: 1. Stellen Sie die höchste Wasserenthärterstufe ein. 2. Stellen Sie sicher, dass der Salzbehälter und der KlarspülmittelDosierer gefüllt sind. 3. Starten Sie das kürzeste Programm mit einer Spülphase. Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht. 4. Stellen Sie den Wasserenthärter nach Ablauf des Programms auf die Wasserhärte in Ihrer Region ein. 5. Stellen Sie die Menge des Klarspülmittels ein. 6.
DEUTSCH 17 11.1 Reinigen der Filter Das Filtersystem besteht aus 3 Teilen. C B A 1. Drehen Sie den Filter (B) nach links und nehmen Sie ihn heraus. 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein.
www.aeg.com ACHTUNG! Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 11.2 Reinigen der Sprüharme Bauen Sie die Sprüharme nicht aus. Falls die Löcher in den Sprüharmen verstopft sind, reinigen Sie sie mit einem dünnen spitzen Gegenstand. 11.3 Reinigen der Außenseiten • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. • Verwenden Sie ausschließlich Neutralreiniger.
DEUTSCH 19 Problem und Alarmcode Mögliche Ursachen und Abhilfe Das Programm startet nicht. • Vergewissern Sie sich, dass die Tür geschlossen ist. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie diese ab, oder warten Sie, bis sie abgelaufen ist. • Das Gerät regeneriert das Filterharz des Wasserenthärters. Dieser Vorgang dauert ca. 5 Minuten. Es läuft kein Wasser in das Gerät. • Vergewissern Sie sich, dass der Wasserzulauf geöffnet ist.
www.aeg.com Problem und Alarmcode Mögliche Ursachen und Abhilfe Die Gerätetür ist schwer zu schließen. • Das Gerät steht nicht waagrecht. Schrauben Sie die Schraubfüße weiter hinein oder weiter heraus (falls vorhanden). • Teile des Geschirrs ragen aus den Körben heraus. Klappernde/schlagende Ge- • Das Geschirr ist nicht richtig in den Körben eingeordnet. räusche aus dem GeräteinSiehe Broschüre zum Beladen der Körbe. neren. • Achten Sie darauf, dass sich die Sprüharme frei drehen können.
DEUTSCH 21 Störung Mögliche Ursache und Abhilfe Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie eine geringere Klarspülmittelmenge ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu niedrig. Stellen Sie eine höhere Klarspülmittelmenge ein. • Die Ursache kann in der Qualität des Klarspülmittels liegen.
www.aeg.com Störung Mögliche Ursache und Abhilfe Kalkablagerungen auf dem Geschirr, im Innenraum und auf der Türinnenseite. • Siehe „Wasserenthärter“. Das Geschirr ist glanzlos, verfärbt sich oder ist angeschlagen. • Achten Sie darauf, dass nur spülmaschinenfestes Geschirr im Gerät gespült wird. • Laden und entladen Sie den Korb vorsichtig. Siehe Broschüre zum Beladen der Körbe. • Ordnen Sie empfindliche Gegenstände im Oberkorb an.
DEUTSCH 23
100012661-A-412015 www.aeg.