FAVORIT 56052UM0 FAVORIT 56052UW0 FAVORIT 56052UD0 DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMME . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie die mitgelieferte Anleitung sorgfältig vor der Montage und dem ersten Gebrauch des Geräts durch. Der Hersteller ist nicht dafür verantwortlich, wenn eine fehlerhafte Montage oder Verwendung Verletzungen und Schäden verursacht. Bewahren Sie die Anleitung zusammen mit dem Gerät für den zukünftigen Gebrauch auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Erstickungs- und Verletzungsgefahr oder Gefahr einer dauerhaften Behinderung.
www.aeg.com • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch des beschädigten Netzkabels an den Kundendienst oder einen Elektriker. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Stromnetz trennen möchten. Ziehen Sie dazu immer direkt am Netzstecker. 1.
DEUTSCH 2. GERÄTEBESCHREIBUNG 1 2 11 10 9 8 7 6 5 4 3 1 Oberer Sprüharm 7 Klarspülmittel-Dosierer 2 Unterer Sprüharm 3 Filter 8 Reinigungsmittelbehälter 4 Typenschild 10 Unterkorb 5 Salzbehälter 11 Oberkorb 9 Besteckkorb 6 Wasserhärtestufen-Wähler 3.
www.aeg.com 1 Taste Ein/Aus 7 Programmtaste (nach unten) 2 Programmübersicht 3 Programmanzeigen 8 Programmtaste (nach oben) 4 Anzeigen 9 Multitab-Taste 10 ExtraHygiene-Taste 5 Display 11 Delay-Taste 6 Reset-Taste Kontrolllam- Beschreibung pen Klarspülmittel-Anzeige. Diese Anzeige ist ausgeschaltet, während das Programm läuft. Salz-Anzeige. Diese Anzeige ist ausgeschaltet, während das Programm läuft. ExtraHygiene-Anzeige Multitab-Anzeige 4.
DEUTSCH 7 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein. 2) Dieses Programm enthält eine Spülphase mit hoher Temperatur, um hygienischere Spülergebnisse zu liefern. Während der Spülphase wird die Temperatur für 10 bis 14 Minuten auf 70 °C gehalten. Dieses Programm enthält die Option Sanitize.
www.aeg.com 5.1 Option Multitab Schalten Sie diese Option nur ein, wenn Sie Kombi-Reinigungstabletten verwenden. Mit der Option „Multitab“ wird die Zufuhr von Klarspülmittel und Salz ausgeschaltet. Die entsprechenden Kontrolllampen sind ausgeschaltet. Die Programmdauer kann sich verlängern. Einschalten der Funktion Multitab Schalten Sie die Multitab-Funktion vor dem Beginn eines Programms ein oder aus. Sie können diese Funktion nicht während eines laufenden Programms einoder ausschalten. 1.
DEUTSCH 9 6.1 Einstellen des Wasserenthärters WasserenthärterEinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.
www.aeg.com 6.2 Befüllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
DEUTSCH 11 7. TÄGLICHER GEBRAUCH 1. Drehen Sie den Wasserhahn auf. 2. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet, siehe Abschnitt „Einstellen und Starten eines Programms“. • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe „Salz“ leuchtet. • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. 5.
www.aeg.com des Programms, das Sie auswählen möchten, aufleuchtet. • Die Programmdauer blinkt im Display. 6. Stellen Sie nach Bedarf die Optionen ein. 7. Schließen Sie die Gerätetür. Das Programm wird gestartet. • Im Display wird die Programmdauer angezeigt, die in 1-MinutenSchritten zurückgezählt wird. Starten eines Programms mit Zeitvorwahl 1. Wählen Sie das Programm und die gewünschten Optionen. 2.
DEUTSCH 13 8. TIPPS UND HINWEISE 8.1 Der Wasserenthärter Hartes Wasser enthält viele Mineralien, die das Gerät beschädigen können und zu schlechten Spülergebnissen führen. Der Wasserenthärter neutralisiert diese Mineralien. Das Geschirrspülsalz hält den Wasserenthärter sauber und in gutem Zustand. Der Wasserenthärter muss unbedingt auf die richtige Stufe eingestellt werden. So stellen Sie sicher, dass der Wasserenthärter die richtige Menge Geschirrspülsalz und Wasser verwendet. 8.
www.aeg.com 9. REINIGUNG UND PFLEGE WARNUNG! Schalten Sie vor Reinigungsarbeiten immer das Gerät aus und ziehen Sie den Netzstecker aus der Steckdose. Verschmutzte Filter und verstopfte Sprüharme beeinträchtigen das Spülergebnis. Prüfen Sie die Filter regelmäßig und reinigen Sie diese, falls nötig. 9.1 Filterreinigung 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus.
DEUTSCH 15 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
www.aeg.com 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Einschalten des KlarspülmittelDosierers bei eingeschalteter Option „Multitab“ Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten.
DEUTSCH Leistungsaufnahme 17 Unausgeschaltet 0.99 W Ausgeschaltet 0.10 W 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
www.aeg.
DEUTSCH 19
156961151-A-262012 www.aeg.