FAVORIT56528IM0 FR Notice d'utilisation
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRANÇAIS 1. 3 INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
www.aeg.com AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
FRANÇAIS 2. DESCRIPTION DE L'APPAREIL 1 2 10 9 8 7 6 5 4 3 1 Bras d'aspersion supérieur 6 Distributeur de liquide de rinçage 2 Bras d'aspersion inférieur 3 Filtres 7 Distributeur de produit de lavage 4 Plaque signalétique 9 Panier inférieur 10 Panier supérieur 5 Réservoir de sel régénérant 8 Panier à couverts 3.
www.aeg.com 3 Voyants 7 Touche Multitab 4 Affichage 5 Touche Delay 8 Touche Programme (haut) 6 Touche ExtraHygiene Voyants 9 Touche Programme (bas) 10 Touche Reset Description Voyant du réservoir de liquide de rinçage. Ce voyant est éteint pendant le déroulement du programme. Voyant du réservoir de sel régénérant. Ce voyant est éteint pendant le déroulement du programme. Voyant ExtraHygiene Voyant Multitab. 4.
FRANÇAIS 7 2) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme. 3) Ce programme comprend une phase de rinçage à haute température, pour des résultats plus hygiéniques. Au cours de la phase de rinçage, la température reste à 70 °C pendant 10 à 14 minutes. 4) Ce programme permet de laver une charge de vaisselle fraîchement salie.
www.aeg.com Comment activer l'option Multitab 1. Appuyez sur Multitab ; le voyant correspondant s'allume. Si vous cessez d'utiliser des pastilles de détergent multifonctions, avant de commencer à utiliser à la fois du produit de lavage, du liquide de rinçage et du sel régénérant, effectuez ces étapes : 1. Réglez l'adoucisseur d'eau au niveau maximal. 2. Assurez-vous que le réservoir de sel régénérant et le distributeur de liquide de rinçage sont pleins. 3.
FRANÇAIS 9 Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°fH) mmol/l Degrés Clarke Niveau 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 < 0.7 <5 12) 1) Réglage d'usine. 2) N'utilisez pas de sel à ce niveau. Réglage électronique 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil.
www.aeg.com 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant. Enlevez le sel qui se trouve autour de l'ouverture du réservoir de sel régénérant. Tournez le couvercle vers la droite pour fermer le réservoir de sel régénérant.
FRANÇAIS 11 7. UTILISATION QUOTIDIENNE 1. Ouvrez le robinet d'eau. 2. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 3. Chargez les paniers. 4. Ajoutez du produit de lavage.
www.aeg.com che, le voyant clignote et que la durée du programme s'affiche. Si le bandeau de commande n'indique pas cette condition, maintenez enfoncée la touche Reset jusqu'à ce que l'appareil se mette en mode Programmation. Démarrage d'un programme sans départ différé 1. Ouvrez le robinet d'eau. 2. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation. 3. Pour régler un programme, laissez la porte de l'appareil entrouverte. 4.
FRANÇAIS Important • Attendez que la vaisselle refroidisse avant de la retirer du lave-vaisselle. La vaisselle encore chaude est sensible aux chocs. • Déchargez d'abord le panier inférieur, puis le panier supérieur. 13 • Les côtés et la porte de l'appareil peuvent être mouillés. L'acier inoxydable refroidit plus rapidement que la vaisselle. 8. CONSEILS 8.1 Adoucisseur d'eau L'eau dure contient une grande quantité de minéraux pouvant endommager l'appareil et donner de mauvais résultats de lavage.
www.aeg.com • Placez les articles légers dans le panier supérieur. Disposez-les de façon à ce qu'ils ne puissent pas se retourner. • Assurez-vous que les bras d'aspersion tournent librement avant de lancer un programme. 8.4 Avant le démarrage d'un programme Assurez-vous que : • Les filtres sont propres et correctement installés. • Les bras d'aspersion ne sont pas obstrués. • La vaisselle est bien positionnée dans les paniers. • Le programme est adapté au type de vaisselle et au degré de salissure.
FRANÇAIS 6. 7. 15 Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C). Assemblez le filtre (A) et remettez-le en place dans le filtre (B). Tournez-le vers la droite jusqu'à la butée. Une position incorrecte des filtres peut donner de mauvais résultats de lavage et endommager l'appareil. 9.2 Nettoyage des bras d'aspersion 9.3 Nettoyage extérieur Ne retirez pas les bras d’aspersion.
www.aeg.com Problème Solution possible Assurez-vous que la pression de l'arrivée d'eau n'est pas trop basse. Pour obtenir cette information, contactez votre compagnie des eaux. Assurez-vous que le robinet d'eau n'est pas obstrué. Assurez-vous que le filtre du tuyau d'arrivée d'eau n'est pas obstrué. Assurez-vous que le tuyau d'arrivée d'eau n'est pas tordu ni plié. L'appareil ne vidange pas l'eau. Assurez-vous que le siphon de l'évier n'est pas obstrué.
FRANÇAIS de programme , commencent à clignoter. et 3. Appuyez sur la touche . • Les voyants des programmes et s'éteignent. • Le voyant du programme continue à clignoter. • L'affichage indique le réglage actuel. 17 4. Appuyez sur la touche pour modifier le réglage. 5. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil et confirmer le réglage. 6. Ajustez la quantité de liquide de rinçage libérée. 7. Remplissez le distributeur de liquide de rinçage. Distributeur de liquide de rinçage désactivé.
www.aeg.com recyclage ou contactez vos services municipaux.
FRANÇAIS 19
156977660-A-472013 www.aeg.