FAVORIT 65042 U DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 9 10 7 8 4 6 5 1 Oberer Sprüharm 7 Wasserhärtestufen-Wähler 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Waschmittelschublade 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3.
www.aeg.com 1 „Ein/Aus“-Taste 5 Delay-Taste 2 Program-Taste 3 Programmkontrolllampen 6 Start-Taste 4 Display 8 Option-Taste Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Multitab“ Kontrolllampe „ExtraHygiene“ Kontrolllampe „Hauptspülgang“. Leuchtet während des Hauptspülgangs auf. Kontrolllampe „Spülphase“. Leuchtet während des Spülgangs auf. Kontrolllampe „Trocknen“. Leuchtet während der Trocknungsphase auf. Kontrolllampe „Programmende“ Kontrolllampe „Tür“.
DEUTSCH Programm 4) 5) Verschmutzungsgrad Beladung Programmphasen 7 Optionen Vor kurzem benutz- Hauptspülgang 60 °C ExtraHygiene tes Geschirr Spülgang Geschirr und Besteck Normal verschmutzt Geschirr und Besteck Vorspülen ExtraHygiene Hauptspülgang 50 °C Spülgänge Trocknen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
www.aeg.com 5. OPTIONEN Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Optionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist. Haben Sie eine oder mehrere Optionen eingeschaltet, prüfen Sie, ob die entsprechenden Kontrolllampen leuchten, bevor Sie das Programm starten. 5.1 Multitab Schalten Sie diese Option nur ein, wenn Sie Kombi-Reinigungstabletten verwenden. Mit der Option „Multitab“ wird die Zufuhr von Klarspülmittel und Salz ausgeschaltet.
DEUTSCH 9 6.1 Einstellen des Wasserenthärters Wasserenthärtereinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.
www.aeg.com 4. Drücken Sie die Taste „Program“ wiederholt, um die Einstellung zu ändern. 5. Drücken Sie die Taste „Ein/Aus“, um das Gerät auszuschalten und die Einstellung zu bestätigen. 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz.
DEUTSCH stellmodus befindet, siehe Abschnitt „Einstellen und Starten eines Programms“. • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe „Salz“ leuchtet. • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 11 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. • Wenn Sie die Kombi-Reinigungstabletten verwenden, schalten Sie die Option Multitab ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.
www.aeg.com • Die Phasenanzeigen des gewählten Spülprogramms erlöschen. 3. Drücken Sie „Start“, um den Countdown zu starten. • Die Anzeige der Zeitvorwahl nimmt in Schritten von jeweils 1 Stunde ab. Nach Ablauf der Zeitvorwahl wird das Programm gestartet. Die Anzeige für das laufende Programm leuchtet. Öffnen der Tür während eines laufenden Programms Wenn Sie die Tür öffnen, unterbricht das Gerät das Programm.
DEUTSCH andere Zusätze. Achten Sie darauf, dass die Tabletten der Wasserhärte in Ihrer Region entsprechen. Beachten Sie die Anweisungen auf der Reinigungsmittelverpackung. • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge.
www.aeg.com 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
DEUTSCH 15 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
www.aeg.com Werden andere Alarmcodes im Display angezeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu niedrig.
DEUTSCH 17 Wasserdruck Min. / max. (bar / MPa) Wasserversorgung 1) Kalt- oder Warmwasser2) (0.5 / 0.05 ) / (8 / 0.8 ) Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W max. 60 °C 12 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B.
www.aeg.
DEUTSCH 19
117921331-A-072013 www.aeg.