FAVORIT 65042 WOP FAVORIT 65042 MOP NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation 2 18 33
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. VEILIGHEIDSVOORSCHRIFTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSVOORSCHRIFTEN Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen WAARSCHUWING! Gevaar voor verstikking, letsel of permanente invaliditeit.
www.aeg.com WAARSCHUWING! Gevaarlijke spanning. • Als de watertoevoerslang beschadigd is, haal dan onmiddellijk de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen. 1.
NEDERLANDS 2. BESCHRIJVING VAN HET PRODUCT 2 1 3 4 13 12 10 9 11 8 7 5 6 1 Bovenblad 8 Waterhardheidsknop 2 Top sproeiarm 9 Glansmiddeldoseerbakje 3 Bovenste sproeiarm 4 Onderste sproeiarm 10 Wasmiddeldoseerlade 5 Filters 12 Onderrek 6 Typeplaatje 13 Bovenrek 11 Bestekmand 7 Zoutreservoir 3.
www.aeg.com 1 Aan/uit-toets 5 Delay-toets 2 Program-toets 3 Programma-indicatielampjes 6 Start-toets 4 Display (weergave) 8 Option-toets Indicatielampjes 7 Indicatielampjes Omschrijving Multitab-indicatielampje. ExtraHygiene-indicatielampje. Wasfase-indicatielampje. Gaat aan wanneer de wasfase loopt. Spoelfase-indicatielampje. Gaat aan wanneer de spoelfase loopt. Droogfase-indicatielampje. Gaat aan wanneer de droogfase loopt. Indicatielampje einde programma. Glansmiddelindicatielampje.
NEDERLANDS Programma 4) 5) Mate van vervuiling Type lading Programma fasen Options (Opties) Pas bevuild Serviesgoed en bestek Afwassen 60 °C Spoeling ExtraHygiene Normaal bevuild Serviesgoed en bestek Voorspoelen Afwassen 50 °C Spoelgangen Drogen ExtraHygiene 7 1) Het apparaat detecteert de mate van vervuiling en de hoeveelheid serviesgoed in de korven. De temperatuur en hoeveelheid water, het energieverbruik en de programmaduur worden automatisch aangepast.
www.aeg.com 5.1 Multitab Activeer deze optie alleen als u allesin-1-tabletten gebruikt. Deze optie stopt de stroom van glansmiddel en zout. De bijbehorende indicatielampje gaan uit. De programmaduur kan toenemen. • Blijf op Option drukken tot het lampje Multitab aan gaat. Voer deze stappen uit als u stopt met het gebruik van gecombineerde afwastabletten en voordat u begint met het gebruik van afzonderlijk afwasmiddel, glansmiddel en regenereerzout: 1. Stel de waterontharder in op het hoogste niveau. 2.
NEDERLANDS 9 Waterontharder afstelling Waterhardheid Duitse graden (°dH) Franse graden (°fH) mmol/l Clarkegraden Handmatig Elektronisch 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Fabrieksinstelling 2) Gebruik geen zout op dit niveau. U moet de waterontharder handmatig en elektronisch instellen. Handmatig instellen Zet de waterhardheidsknop in stand 1 of 2.
www.aeg.com 6.2 Het zoutreservoir vullen 1. 2. 3. 4. 5. Draai de dop linksom om het zoutreservoir te openen. Doe een liter water in het zoutreservoir (alleen de eerste keer). Vul het zoutreservoir met regenereerzout. Verwijder het zout rond de opening van het zoutreservoir. Draai de dop rechtsom om het zoutreservoir te sluiten. LET OP! Water en zout kunnen uit het zoutreservoir stromen als u het bijvult. Gevaar voor roest.
NEDERLANDS 4. Voeg het afwasmiddel toe. • Activeer de Multitab-optie als u gecombineerde afwastabletten gebruikt. 11 5. U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. 7.1 Vaatwasmiddel gebruiken A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Een programma instellen en starten Instelmodus Bij sommige instellingen moet het apparaat in de instelmodus worden gezet. Druk op de aan-/uittoets om het apparaat te activeren.
www.aeg.com De deur openen als het apparaat in werking is Aan het einde van het programma. Als u de deur opent, stopt het apparaat. Als u de deur weer sluit, gaat het apparaat verder vanaf het punt van onderbreking. Het display toont 0 en het indicatielampje voor het einde gaat branden. 1. Druk op de aan/uit-toets om het apparaat te deactiveren. 2. Draai de waterkraan dicht.
NEDERLANDS • Vaatwastabletten worden bij korte programma's niet helemaal opgelost. Wij bevelen u aan de tabletten alleen bij lange programma's te gebruiken, om restjes afwasmiddel op uw serviesgoed te voorkomen. Gebruik niet meer dan de juiste hoeveelheid vaatwasmiddel. Zie de instructies van de vaatwasmiddelfabrikant. 8.3 De korven inruimen Zie de meegeleverde folder voor voorbeelden van het inruimen van de korven. • Gebruik het apparaat alleen om voorwerpen af te wassen die vaatwasbestendig zijn.
www.aeg.com 9.1 De filters reinigen C 1. Draai het filter (A) linksom en verwijder het. 2. Haal om het filter (A) te demonteren, (A1) en (A2) uit elkaar. Verwijder het filter (B). Reinig de filters met water. Zorg er voordat u het filter (B) terugplaatst voor dat er geen etensresten of vuil in en rond de rand van de opvangbak zit. C A B A1 3. 4. 5. A2 6. 7. Zorg ervoor dat het filter (B) juist wordt geplaatst onder de 2 geleiders (C). Monteer het filter (A) en zet het terug in filter (B).
NEDERLANDS 15 10. PROBLEEMOPLOSSING Het apparaat start of stopt niet tijdens de werking. Raadpleeg voordat u contact opneemt met de klantenservice de informatie over het oplossen van problemen. Bij sommige problemen wordt er op de display een alarmcode weergegeven: • - Het apparaat wordt niet gevuld met water. • - Het apparaat pompt geen water weg. • - Het bescherminssysteem tegen waterlekkage is in werking getreden. WAARSCHUWING! Schakel het apparaat uit voordat u controles uitvoert.
www.aeg.com laar van het glansmiddel in op een lagere stand. • Er is te veel vaatwasmiddel gebruikt. Vlekken en droog water komen op glazen en serviesgoed terecht. • De vrijgegeven hoeveelheid glansmiddel is niet voldoende. Stel de keuzeschakelaar van het glansmiddel in op een hogere stand. • De kwaliteit van het vaatwasmiddel kan de oorzaak zijn. Het serviesgoed is nat. • Het afwasprogramma bevatte geen droogfase of een droogfase op lage temperatuur. • Het glansmiddeldoseerbakje is leeg.
NEDERLANDS Energieverbruik 17 Modus aan 0.10 W Modus uit 0.10 W 1) Sluit de slang aan op een kraan met 3/4”-schroefdraad. 2) Als het hete water door alternatieve, milieuvriendelijkere energiebronnen geproduceerd wordt (bijv. zonnepanelen en windenergie), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen. 12. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 19 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • • • 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance.
ENGLISH 2. PRODUCT DESCRIPTION 2 1 3 4 13 12 10 9 11 8 7 5 6 1 Worktop 8 Water hardness dial 2 Top spray arm 9 Rinse aid dispenser 3 Upper spray arm 4 Lower spray arm 10 Detergent dispenser 5 Filters 12 Lower basket 6 Rating plate 13 Upper basket 11 Cutlery basket 7 Salt container 3.
www.aeg.com 1 On/off button 5 Delay button 2 Program button 3 Programme indicators 6 Start button 4 Display 8 Option button Indicators 7 Indicators Description Multitab indicator. ExtraHygiene indicator. Washing phase indicator. It comes on when the washing phase operates. Rinsing phase indicator. It comes on when the rinsing phases operate. Drying phase indicator. It comes on when the drying phase operates. End indicator. Rinse aid indicator. It is always off while the programme operates.
ENGLISH Programme 4) 5) Degree of soil Type of load Programme phases Options Fresh soil Crockery and cutlery Wash 60 °C Rinse ExtraHygiene Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry ExtraHygiene 23 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration.
www.aeg.com 5.1 Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase. • Press Option again and again until the Multitab indicator comes on. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Set the water softener to the highest level. 2.
ENGLISH 25 Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 27 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when all the programme indicators come on and the display shows 2 horizontal status bars.
www.aeg.com Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. 1. Press and hold, at the same time, Delay and Start until all the programme indicators come on and the display shows 2 horizontal status bars. 2. Set the programme again. Cancelling the programme 1. Press and hold, at the same time, Delay and Start until all the programme indicators come on and the display shows 2 horizontal status bars.
ENGLISH • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
ENGLISH Problem 31 Possible solution Make sure that there is not a damaged fuse in the fuse box. The programme does not start. Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
www.aeg.com 2. Press and hold, at the same time, Delay and Start until the indicators of , and start to flash. 3. Press Option . • The indicators of and go off. • The indicator continues to flash. • The display shows the current setting. 4. Press Option to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. Rinse aid dispenser off Rinse aid dispenser on 11.
FRANÇAIS 33 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2. DESCRIPTION DE L'APPAREIL 2 1 3 4 13 12 10 9 11 8 7 5 6 1 Plan de travail 8 Sélecteur de dureté de l'eau 2 Bras d'aspersion supérieur 9 Distributeur de liquide de rinçage 3 Bras d'aspersion intermédiaire 4 Bras d'aspersion inférieur 10 Distributeur de produit de lavage 5 Filtres 12 Panier inférieur 6 Plaque signalétique 13 Panier supérieur 11 Panier à couverts 7 Réservoir de sel régénérant 3.
FRANÇAIS 1 Touche Marche/Arrêt 5 Touche Delay 2 Touche Program 3 Voyants des programmes 6 Touche Start 4 Affichage 8 Touche Option Voyants 37 7 Voyants Description Voyant Multitab. Voyant ExtraHygiene. Voyant de phase de lavage. Il s'allume au cours de la phase de lavage. Voyant de phase de rinçage. Il s'allume au cours de la phase de rinçage. Voyant de phase de séchage. Il s'allume au cours de la phase de séchage. Voyant de fin. Voyant du réservoir de liquide de rinçage.
www.aeg.com Programme 4) 5) Degré de salissure Type de vaisselle Phases du programme Options Vaisselle fraîchement salie Vaisselle et couverts Lavage à 60 °C Rinçage ExtraHygiene Normalement sale Vaisselle et couverts Prélavage Lavage à 50 °C Rinçages Séchage ExtraHygiene 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme.
FRANÇAIS 39 5. OPTIONS Activez ou désactivez les options avant de démarrer un programme. Vous ne pouvez pas activer ni désactiver les options pendant le déroulement d'un programme. Si vous avez activé une ou plusieurs options, assurez-vous que les voyants correspondants sont allumés avant le démarrage du programme. 5.1 Fonction Multitab Activez cette option uniquement si vous utilisez des pastilles de détergent multifonctions. Cette option désactive le débit du liquide de rinçage et du sel régénérant.
www.aeg.com 6.1 Réglage de l'adoucisseur d'eau Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°fH) mmol/l Degrés Clarke Manuel Électronique 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
FRANÇAIS 4. Appuyez sur la touche Program à plusieurs reprises pour modifier le réglage. 41 5. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil et confirmer le réglage. 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant.
www.aeg.com 2. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 3. Chargez les paniers. 4. Ajoutez du produit de lavage.
FRANÇAIS Démarrage d'un programme avec départ différé 1. Sélectionnez le programme. 2. Appuyez sur la touche Delay à plusieurs reprises jusqu'à ce que l'affichage indique le délai choisi pour le départ différé (de 1 à 24 heures). • Le voyant Delay s'allume. • Le délai clignote sur l'affichage. • Les voyants des phases prévues dans le programme sélectionné s'éteignent. 3. Appuyez sur la touche Start pour lancer le compte à rebours. • Le décompte démarre et s'effectue par paliers d'une heure.
www.aeg.com 8.2 Utilisation de sel régénérant, de liquide de rinçage et de produit de lavage • Utilisez uniquement du sel régénérant, du liquide de rinçage et du produit de lavage conçus pour les lave-vaisselle. D'autres produits peuvent endommager l'appareil. • Lors de la dernière phase de rinçage, le liquide de rinçage permet de sécher la vaisselle sans laisser de traînées ni de taches.
FRANÇAIS 45 9. ENTRETIEN ET NETTOYAGE AVERTISSEMENT Avant toute opération d'entretien, éteignez l'appareil et débranchez la prise secteur. Les filtres sales et les bras d'aspersion obstrués diminuent les résultats de lavage. Contrôlez-les régulièrement et nettoyez-les si nécessaire. 9.1 Nettoyage des filtres C 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante.
www.aeg.com Pour éviter cela, nous recommandons de lancer un programme long au moins 2 fois par mois. 10. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou s'arrête en cours de programme. Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • - L'appareil ne se vidange pas.
FRANÇAIS Après avoir effectué les vérifications, mettez l'appareil en marche. Le programme reprend là où il s'était interrompu. Si le problème persiste, contactez le service après-vente. Si l'écran affiche d'autres codes d'alarme, contactez le service après-vente. 10.1 Si les résultats de lavage et de séchage ne sont pas satisfaisants Traînées blanchâtres ou pellicules bleuâtres sur les verres et la vaisselle • La quantité de liquide de rinçage libérée est trop importante.
www.aeg.com 11. CARACTERISTIQUES TECHNIQUES Dimensions Largeur / Hauteur / Profondeur (mm) Branchement électrique Reportez-vous à la plaque signalétique. Tension 596 / 850 / 610 220-240 V Fréquence 50 Hz Pression de l'arrivée d'eau Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W max.
FRANÇAIS 49
www.aeg.
FRANÇAIS 51
117920872-A-122013 www.aeg.