FAVORIT 65050 I NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation DE Benutzerinformation 2 18 33 49
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. VEILIGHEIDSINFORMATIE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSINFORMATIE Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen • Laat het water stromen tot het schoon is voordat u het apparaat aansluit op nieuwe leidingen of leidingen die lang niet zijn gebruikt.
www.aeg.com • Steek de stekker pas in het stopcontact als de installatie is voltooid. Zorg ervoor dat het netsnoer na installatie bereikbaar is. • Trek niet aan het aansluitnoer om het apparaat los te koppelen. Trek altijd aan de stekker. 1.
NEDERLANDS 2. BESCHRIJVING VAN HET PRODUCT 1 2 3 12 11 9 10 8 7 4 6 5 1 Top sproeiarm 7 Waterhardheidsknop 2 Bovenste sproeiarm 8 Glansmiddeldoseerbakje 3 Onderste sproeiarm 4 Filters 9 Wasmiddeldoseerlade 10 Bestekmand 5 Typeplaatje 11 Onderrek 6 Zoutreservoir 12 Bovenrek 3.
www.aeg.com 1 Aan/uit-toets 5 Delay-toets 2 Program-toets 3 Programma-indicatielampjes 6 Start-toets 4 Display (weergave) 8 Option-toets Indicatielampjes 7 Indicatielampjes Beschrijving Multitab-indicatielampje. ÖKO PLUS-indicatielampje. Wasfase-indicatielampje. Spoelfase-indicatielampje. Droogfase-indicatielampje. Einde-indicatielampje. Glansmiddelindicatielampje. Dit indicatielampje is uit als het programma werkt. Zoutindicatielampje. Dit indicatielampje is uit als het programma werkt.
NEDERLANDS Programma 5) Mate van vervuiling Type lading Programma fasen Options (Opties) Normaal bevuild Serviesgoed en bestek Voorspoelen Wassen 50 °C Spoelingen Drogen ÖKO PLUS 7 1) Het apparaat detecteert de mate van vervuiling en de hoeveelheid serviesgoed in de korven. De temperatuur en hoeveelheid water, het energieverbruik en de programmaduur worden automatisch aangepast. 2) Dit programma heeft een spoelfase bij hoge temperatuur voor betere resultaten voor de hygiëne.
www.aeg.com 5.1 Multitabfunctie Activeer deze optie alleen als u allesin-1-tabletten gebruikt. Deze optie stopt de stroom van glansmiddel en zout. De bijbehorende indicatielampje gaan uit. De programmaduur kan stijgen. • Blijf op Option drukken tot het lampje multitab aan gaat. • De optie blijft aan tot u het uitschakelt. Blijf op Option drukken tot het lampje multitab uit gaat.
NEDERLANDS 9 Waterontharder afstelling Waterhardheid Duitse graden (°dH) Franse graden (°fH) mmol/l Clarkegraden Handmatig Elektronisch 23 - 28 40 - 50 4,0 - 5,0 28 - 35 21) 6 19 - 22 33 - 39 3,3 - 3,9 23 - 27 21) 51) 15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4 11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4 <7 < 0,7 <5 12) 12) 1) Fabrieksinstelling 2) Gebruik geen zout op dit niveau.
www.aeg.com 6.2 Het zoutreservoir vullen 1. 2. 3. 4. 5. Draai de dop linksom om het zoutreservoir te openen. Doe een liter water in het zoutreservoir (alleen de eerste keer). Vul het zoutreservoir met regenereerzout. Verwijder het zout rond de opening van het zoutreservoir. Draai de dop rechtsom om het zoutreservoir te sluiten. LET OP! Water en zout kunnen uit het zoutreservoir stromen als u het bijvult. Gevaar voor roest.
NEDERLANDS 4. Voeg vaatwasmiddel toe. 11 5. U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. 7.1 Vaatwasmiddel gebruiken A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Een programma instellen en starten Instelmodus Het apparaat moet in de instelmodus staan om bepaalde acties te accepteren. Het apparaat staat in de instelmodus als, na de activering: • Alle programmalampjes aan gaan.
www.aeg.com – Het indicatielampje van de lopende fase gaat aan. De deur openen als het apparaat in werking is Als u de deur opent, stopt het apparaat. Als u de deur weer sluit, gaat het apparaat verder vanaf het punt van onderbreking. De uitgestelde start annuleren tijdens het aftellen Blijf op Delay drukken tot: • Het display geeft de programmaduur weer. • De fase-indicatielampjes aan gaan. • Het programma wordt gestart.
NEDERLANDS • Voor het gemakkelijk verwijderen van aangebrande voedselresten weekt u de pannen eerst in water voordat u ze in het apparaat plaatst. • Plaats holle voorwerpen (bijv. kopjes, glazen en pannen) met de opening naar beneden. • Zorg ervoor dat serviesgoed en bestek niet in elkaar schuiven. Meng lepels met ander bestek. • Zorg er voor dat glazen andere glazen niet aanraken • Leg kleine voorwerpen in de bestekmand. • Leg lichte voorwerpen in de bovenste korf.
www.aeg.com 9.1 De filters reinigen C 1. Draai het filter (A) linksom en verwijder het. 2. Haal om het filter (A) te demonteren, (A1) en (A2) uit elkaar. Verwijder het filter (B). Reinig de filters met water. Zet het filter (B) terug in de startpositie. Zorg ervoor dat ze goed worden gemonteerd onder de twee geleiders (C). C A B A1 3. 4. 5. A2 6. Monteer het filter (A) en zet het in positie in filter (B). Rechtsom draaien tot het vastzit.
NEDERLANDS • 15 WAARSCHUWING! Schakel het apparaat uit voordat u controles uitvoert. - Het apparaat pompt geen water weg. • - Het bescherminssysteem tegen waterlekkage is in werking getreden. Storing Mogelijke oorzaak Mogelijke oplossing Het programma start niet. De stekker zit niet in het stopcontact. Sluit de stekker aan. De deur van het apparaat is open. Sluit de deur van het apparaat. U hebt niet op toets Start gedrukt. Druk op Start. De zekering in de zekering- Vervang de zekering.
www.aeg.com • Er is te veel vaatwasmiddel gebruikt. Vlekken en droog water komen op glazen en serviesgoed terecht. • De vrijgegeven hoeveelheid glansmiddel is niet voldoende. Stel de keuzeschakelaar van het glansmiddel in op een hogere stand. • De kwaliteit van het vaatwasmiddel kan de oorzaak zijn. Het serviesgoed is nat. • Het afwasprogramma bevatte geen droogfase of een droogfase op lage temperatuur. • Het glansmiddeldoseerbakje is leeg. • De kwaliteit van het glansmiddel kan de oorzaak zijn.
NEDERLANDS 17 1) Sluit de slang aan op een kraan met 3/4”-schroefdraad. 2) Als het hete water door alternatieve, milieuvriendelijkere energiebronnen geproduceerd wordt (bijv. zonnepanelen en windenergie), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen. 12. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 19 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • The first time you use the appliance, make sure that there is no leakage. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 1.
www.aeg.com 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position.
ENGLISH 2. PRODUCT DESCRIPTION 1 2 3 12 11 9 10 8 7 4 6 5 1 Top spray arm 7 Water hardness dial 2 Upper spray arm 8 Rinse aid dispenser 3 Lower spray arm 4 Filters 9 Detergent dispenser 10 Cutlery basket 5 Rating plate 11 Lower basket 6 Salt container 12 Upper basket 3.
www.aeg.com 1 On/off button 5 Delay button 2 Program button 3 Programme indicators 6 Start button 4 Display 8 Option button Indicators 7 Indicators Description Multitab indicator. ÖKO PLUS indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates. Delay indicator. Door indicator.
ENGLISH Programme 5) Degree of soil Type of load Programme phases Options Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry ÖKO PLUS 23 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 2) This programme has a high temperature rinsing phase for better hygiene results.
www.aeg.com • The option stays on until you deactivate it. Press Option again and again until the multitab indicator goes off. 6. Adjust the released quantity of rinse aid. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Deactivate the multitab option. 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4.
ENGLISH 25 Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 27 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: • All the programme indicators come on. • The display shows two horizontal status bars. If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode.
www.aeg.com Cancelling the delay start while the countdown operates Press Delay again and again until: • The display shows the programme duration. • The phase indicators come on. • The programme starts. Cancelling the programme Press and hold Delay and Start at the same time until: • All the programme indicators come on. • The display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. 1.
ENGLISH • Make sure that the spray arms can move freely before you start a programme. 8.3 Using salt, rinse aid and detergent • Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. • The rinse aid helps, during the last rinsing phase, to dry the dishes without streaks and stains. • Combi detergent tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area.
www.aeg.com 2. A1 3. 4. 5. A2 6. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms Do not remove the spray arms.
ENGLISH Problem The appliance does not fill with water. Possible cause Possible solution You did not press Start. Press Start. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. Cancel the delay start or wait for the end of the countdown. The water tap is closed. Open the water tap. The water pressure is too low. Contact your local water authority. 31 The water tap is clogged or Clean the water tap. there is limescale on it.
www.aeg.com 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash. 4. Press Option . • The indicators (A) and (C) go off. • The indicator (B) continues to flash. • The display shows the setting of the rinse aid dispenser. Off On 5. Press Option to change the setting. 6. Deactivate the appliance to confirm. 7. Adjust the released quantity of rinse aid. 8.
FRANÇAIS 33 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS Contactez le service après-vente ou un électricien pour remplacer le câble d'alimentation s'il est endommagé. • Ne connectez la fiche d'alimentation à la prise de courant qu'à la fin de l'installation. Assurez-vous que la prise de courant est accessible une fois l'appareil installé. • Ne tirez pas sur le câble électrique pour débrancher l'appareil. Tirez toujours sur la prise. 1.
www.aeg.com 2. DESCRIPTION DE L'APPAREIL 1 2 3 12 11 9 10 8 7 4 6 5 1 Bras d'aspersion supérieur 7 Sélecteur de dureté de l'eau 2 Bras d'aspersion intermédiaire 8 Distributeur de liquide de rinçage 3 Bras d'aspersion inférieur 4 Filtres 9 Distributeur de produit de lavage 10 Panier à couverts 5 Plaque signalétique 11 Panier inférieur 6 Réservoir de sel régénérant 12 Panier supérieur 3.
FRANÇAIS 1 Touche Marche/Arrêt 5 Touche Delay 2 Touche Program 3 Voyants des programmes 6 Touche Start 4 Affichage 8 Touche Option Voyants 37 7 Voyants Description Voyant « Tout en 1 ». Voyant ÖKO PLUS. Voyant de phase de lavage. Voyant de phase de rinçage. Voyant de phase de séchage. Voyant de fin. Voyant du réservoir de liquide de rinçage. Ce voyant est éteint pendant le déroulement du programme. Voyant du réservoir de sel régénérant. Ce voyant est éteint pendant le déroulement du programme.
www.aeg.com Programme 4) 5) Degré de salissure Type de charge Phases du programme Vaisselle fraîchement salie Vaisselle et couverts Lavage à 60 °C Rinçage Normalement sale Vaisselle et couverts Prélavage Lavage à 50 °C Rinçages Séchage Options ÖKO PLUS 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme.
FRANÇAIS 39 5. OPTIONS Activez ou désactivez les options avant de démarrer un programme. Vous ne pouvez pas activer ni désactiver les options pendant le déroulement d'un programme. Si vous avez activé une ou plusieurs options, assurez-vous que les voyants correspondants sont allumés avant le démarrage du programme. 5.1 « Tout en 1 » Activez cette option uniquement si vous utilisez des pastilles de détergent multifonctions. Cette option désactive le débit du liquide de rinçage et du sel régénérant.
www.aeg.com 6.1 Réglage de l'adoucisseur d'eau Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°tH) mmol/l Degrés Clarke Manuel Électronique 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
FRANÇAIS 41 6. Mettez à l'arrêt l'appareil pour confirmer. 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant. Enlevez le sel qui se trouve autour de l'ouverture du réservoir de sel régénérant. Tournez le couvercle vers la droite pour fermer le réservoir de sel régénérant.
www.aeg.com que l'appareil est en mode Programmation ; reportez-vous au chapitre « RÉGLAGE ET DÉPART D'UN PROGRAMME ». • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 3. Chargez les paniers. 4. Ajoutez du produit de lavage. 5. Réglez et lancez le programme adapté au type de vaisselle et au degré de salissure. 7.1 Utilisation du produit de lavage A 1. B 2. 30 3.
FRANÇAIS Lancement d'un programme avec départ différé 1. Sélectionnez le programme et les options. 2. Appuyez sur Delay à plusieurs reprises jusqu'à ce que l'affichage indique le délai choisi pour le départ différé (de 1 à 24 heures). • Le délai clignote sur l'affichage. • Le voyant correspondant au départ différé s'allume. 3. Appuyez sur Start. Le décompte démarre. • L'affichage indique le décompte du départ différé par intervalles d'une heure.
www.aeg.com l'adoucisseur d'eau utilise la quantité correcte de sel régénérant et d'eau. 8.2 Chargement des paniers Reportez-vous à la brochure fournie pour consulter des exemples de charge des paniers. • Utilisez uniquement cet appareil pour laver des articles qui peuvent passer au lave-vaisselle. • Ne mettez pas dans le lave-vaisselle des articles en bois, en corne, en aluminium, en étain et en cuivre. • Ne placez pas dans l'appareil des objets pouvant absorber l'eau (éponges, chiffons de nettoyage).
FRANÇAIS 45 9. ENTRETIEN ET NETTOYAGE AVERTISSEMENT Avant toute opération d'entretien, éteignez l'appareil et débranchez la prise secteur. Les filtres sales et les bras d'aspersion obstrués diminuent les résultats de lavage. Contrôlez-les régulièrement et nettoyez-les si nécessaire. 9.1 Nettoyage des filtres C 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante.
www.aeg.com 10. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou s'arrête en cours de programme. Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • - L'appareil ne se vidange pas. - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications.
FRANÇAIS 10.1 Si les résultats de lavage et de séchage ne sont pas satisfaisants Traînées blanchâtres ou pellicules bleuâtres sur les verres et la vaisselle • La quantité de liquide de rinçage libérée est trop importante. Placez le sélecteur de dosage du liquide de rinçage sur le niveau le plus faible. • La quantité de produit de lavage est excessive. Taches et traces de gouttes d'eau séchées sur les verres et la vaisselle • La quantité de liquide de rinçage libérée n'est pas suffisante.
www.aeg.com Pression de l'arrivée d'eau Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W max. 60 °C 12 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce).
DEUTSCH 49 INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SICHERHEITSHINWEISE Lesen Sie die mitgelieferte Anleitung sorgfältig vor der Montage und dem ersten Gebrauch des Geräts durch. Der Hersteller ist nicht dafür verantwortlich, wenn eine fehlerhafte Montage oder Verwendung Verletzungen und Schäden verursacht. Bewahren Sie die Anleitung zusammen mit dem Gerät für den zukünftigen Gebrauch auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Erstickungs- und Verletzungsgefahr oder Gefahr einer dauerhaften Behinderung.
DEUTSCH • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Wenden Sie sich zum Austausch des beschädigten Netzkabels an den Kundendienst oder einen Elektriker. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Stromnetz trennen möchten. Ziehen Sie dazu immer direkt am Netzstecker. 1.
www.aeg.com 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 9 10 8 7 4 6 5 1 Oberer Sprüharm 7 Wasserhärtestufen-Wähler 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Waschmittelschublade 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3.
DEUTSCH 1 Taste „Ein/Aus“ 5 Delay-Taste 2 Program-Taste 3 Programm-Kontrolllampen 6 Start-Taste 4 Display 8 Option-Taste Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Multitab“. Kontrolllampe „ÖKO PLUS“. Kontrolllampe „Hauptspülgang“. Kontrolllampe „Klarspülphase“. Kontrolllampe „Trocknungsphase“. Kontrolllampe „Programmende“. Kontrolllampe „Klarspülmittel“. Diese Kontrolllampe erlischt während des Programmbetriebs. Kontrolllampe „Salz“.
www.aeg.com Programm 4) 5) Verschmutzungsgrad Beladung Programmphasen Optionen Vor kurzem benutztes Geschirr Geschirr und Besteck Hauptspülgang 60 °C Spülgang Normal verschmutzt Geschirr und Besteck Vorspülen ÖKO PLUS Hauptspülgang 50 °C Spülgänge Trocknen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
DEUTSCH 55 5. OPTIONEN Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Optionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist. Haben Sie eine oder mehrere Optionen eingeschaltet, prüfen Sie, ob die entsprechenden Kontrolllampen leuchten, bevor Sie das Programm starten. 5.1 Multitab Schalten Sie diese Option nur ein, wenn Sie Kombi-Reinigungstabletten verwenden. Mit der Option „Multitab“ wird die Zufuhr von Klarspülmittel und Salz ausgeschaltet.
www.aeg.com 6.1 Einstellen des Wasserenthärters WasserenthärterEinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.
DEUTSCH 57 6. Schalten Sie das Gerät zur Bestätigung aus. 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen.
www.aeg.com • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe „Salz“ leuchtet. • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
DEUTSCH • Im Display wird der Ablauf der Zeitvorwahl angezeigt, die in Schritten von jeweils 1 Stunde abnimmt. • Die Phasenkontrolllampen des eingestellten Programms erlöschen. • Nach Ablauf der Zeitvorwahl startet das Programm. – Die Anzeige des laufenden Programmabschnitts leuchtet auf. Öffnen der Tür während des Betriebs Wenn Sie die Tür öffnen, stoppt das Gerät. Wenn Sie die Tür wieder schließen, läuft das Gerät ab dem Zeitpunkt der Unterbrechung weiter.
www.aeg.com • Spülen Sie im Gerät keine Geschirrteile aus Holz, Horn, Aluminium, Zinn oder Kupfer. • Spülen Sie in diesem Gerät keine Gegenstände, die Wasser aufnehmen können (Schwämme, Geschirrtücher, usw.). • Entfernen Sie Speisereste vom Geschirr. • Um eingebrannte Essensreste leicht zu beseitigen, weichen Sie diese ein, bevor Sie das Kochgeschirr in das Gerät stellen. • Ordnen Sie hohle Gefäße (z. B. Tassen, Gläser, Pfannen) mit der Öffnung nach unten ein.
DEUTSCH 61 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Setzen Sie den Filter (B) wieder in der ursprünglichen Position ein. Vergewissern Sie sich, dass er korrekt unter den beiden Führungen (C) sitzt. C A B A1 3. 4. 5. A2 6. Bauen Sie den Filter (A) zusammen und setzen Sie ihn in Filter (B) ein.
www.aeg.com können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. Problem • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. Mögliche Ursache Mögliche Abhilfe Das Programm star- Der Netzstecker steckt tet nicht. nicht richtig in der Steckdose. Die Gerätetür ist offen. Schließen Sie die Gerätetür.
DEUTSCH Tritt das Problem erneut auf, wenden Sie sich an den Kundendienst. Wenn das Display andere Alarmcodes anzeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch.
www.aeg.com max. 60 °C Wasserversorgung 1) Kalt- oder Warmwasser2) Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W 12 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12.
DEUTSCH 65
www.aeg.
DEUTSCH 67
117915110-A-192012 www.aeg.