FAVORIT 65050 IM0P NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation DE Benutzerinformation 2 17 31 47
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. VEILIGHEIDSVOORSCHRIFTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSVOORSCHRIFTEN Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen WAARSCHUWING! Gevaar voor verstikking, letsel of permanente invaliditeit.
www.aeg.com WAARSCHUWING! Gevaarlijke spanning. • Als de watertoevoerslang beschadigd is, haal dan onmiddellijk de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen. 1.
NEDERLANDS 2. BESCHRIJVING VAN HET PRODUCT 1 2 3 12 11 9 10 8 7 4 6 5 1 Top sproeiarm 7 Luchtopening 2 Bovenste sproeiarm 8 Glansmiddeldoseerbakje 3 Onderste sproeiarm 4 Filters 9 Wasmiddeldoseerbakje 10 Bestekkorf 5 Typeplaatje 11 Onderkorf 6 Zoutreservoir 12 Bovenkorf 3.
www.aeg.com 1 Aan/uit-toets 5 Delay-toets 2 Program-toets 3 Programma-indicatielampjes 6 Start-toets 4 Display (weergave) 8 Option-toets Indicatielampjes 7 Indicatielampjes Beschrijving Multitab-indicatielampje. ÖKO PLUS-indicatielampje. Wasfase-indicatielampje. Spoelfase-indicatielampje. Droogfase-indicatielampje. Einde-indicatielampje. Glansmiddelindicatielampje. Dit indicatielampje is uit als het programma werkt. Zoutindicatielampje. Dit indicatielampje is uit als het programma werkt.
NEDERLANDS Programma 5) Mate van vervuiling Type lading Programma fasen Options (Opties) Normaal bevuild Serviesgoed en bestek Voorspoelen Wassen 50 °C Spoelingen Drogen ÖKO PLUS Multitab 7 1) Het apparaat detecteert de mate van vervuiling en de hoeveelheid serviesgoed in de korven. De temperatuur en hoeveelheid water, het energieverbruik en de programmaduur worden automatisch aangepast. 2) Dit programma heeft een spoelfase bij hoge temperatuur voor betere resultaten voor de hygiëne.
www.aeg.com 5.1 Multitab Activeer deze optie alleen als u allesin-1-tabletten gebruikt. Deze optie stopt de stroom van glansmiddel en zout. De bijbehorende indicatielampje gaan uit. De programmaduur kan toenemen. • Blijf op Option drukken tot het lampje Multitab aan gaat. Voer deze stappen uit als u stopt met het gebruik van gecombineerde afwastabletten en voordat u begint met het gebruik van afzonderlijk afwasmiddel, glansmiddel en regenereerzout: 1. Stel de waterontharder in op het hoogste niveau. 2.
NEDERLANDS 9 Waterontharder afstelling Waterhardheid Duitse graden (°dH) Franse graden (°fH) mmol/l Clarkegraden Niveau 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 < 0.7 <5 12) 1) Fabrieksinstelling 2) Gebruik geen zout op dit niveau. Het instellen van het niveau van de waterontharder 1. Druk op de aan-/uittoets om het apparaat te activeren. Zorg dat het apparaat in de instelmodus staat. Zie 'Een programma instellen en starten'. 2.
www.aeg.com 6.3 Het glansmiddeldoseerbakje vullen 1. B A M AX 4 3 2 1 + - C D Druk op de ontgrendelknop (D) om het deksel (C) te openen. 2. Vul het glansmiddeldoseerbakje (A) niet verder dan de aanduiding 'max'. 3. Verwijder gemorst glansmiddel met een absorberend doekje om te voorkomen dat er te veel schuim ontstaat. 4. Sluit het deksel. Zorg ervoor dat het ontgrendelknopje op zijn plaats dichtklikt.
NEDERLANDS 7.2 Een programma instellen en starten Instelmodus Bij sommige instellingen moet het apparaat in de instelmodus worden gezet. Druk op de aan-/uittoets om het apparaat te activeren. Het apparaat staat in de instelmodus als alle programmalampjes gaan branden en het display 2 horizontale statusbalkjes weergeeft. Als dit niet op het bedieningspaneel wordt aangegeven, houdt u tegelijkertijd Delay en Start ingedrukt totdat het apparaat in de instelmodus staat.
www.aeg.com Als u niet op de aan-/uittoets drukt, schakelt de functie AUTO OFF het apparaat na een paar minuten na het einde van het programma automatisch uit. Dit helpt het energieverbruik te verminderen, den zijn gevoelig voor beschadigingen. • Ruim eerst het onderrek en dan het bovenrek uit. • Er kan water liggen aan de zijkanten en op de deur van het apparaat. Roestvrij staal koelt sneller af dan borden. Let op • Laat de borden afkoelen voordat u deze uit het apparaat neemt. Hete bor- 8.
NEDERLANDS • Leg lichte voorwerpen in de bovenste korf. Zorg ervoor dat de voorwerpen niet verschuiven. • Zorg er voor dat de sproeiarmen vrij kunnen ronddraaien voordat u een programma start. 13 • De positie van de items in de mandjes correct is. • Het programma van toepassing is op het type lading en de mate van bevuiling. • De juiste hoeveelheid afwasmiddel is gebruikt. • Er regenereerzout en glansmiddel is toegevoegd (tenzij u gecombineerde afwastabletten gebruikt).
www.aeg.com 6. 7. Zorg ervoor dat het filter (B) juist wordt geplaatst onder de 2 geleiders (C). Monteer het filter (A) en zet het terug in filter (B). Rechtsom draaien tot het vastzit. Een onjuiste plaatsing van de filters kan leiden tot slechte wasresultaten en het apparaat beschadigen. 9.2 De sproeiarmen reinigen Probeer niet de sproeiarmen te verwijderen. Als etensresten de openingen in de sproeiarmen hebben verstopt, verwijder deze dan met een smal en puntig voorwerp. 9.
NEDERLANDS Probleem 15 Mogelijke oplossing Als de starttijdkeuze start is ingesteld, annuleert u deze functie of wacht u tot het einde van het aftellen. Het apparaat wordt niet met wa- Controleer of de waterkraan is geopend ter gevuld. Zorg dat de waterdruk niet te laag is. Neem hiervoor zo nodig contact op met uw lokale waterleidingbedrijf. Controleer of de waterkraan niet verstopt is. Controleer of het filter in de toevoerslang niet verstopt is.
www.aeg.com • De indicatielampjes (A) en (C) gaan uit. • Het indicatielampje (B) blijft knipperen. • Op het display wordt de huidige instelling van het glansmiddeldoseerbakje weergegeven. 4. Druk op Option om de instelling te wijzigen. 5. Druk op de aan/uit-toets om het apparaat te deactiveren en om de instelling te bevestigen. 6. Stel de hoeveelheid glansmiddel in. 7. Vul het glansmiddeldoseerbakje. Uit Aan 11.
ENGLISH 17 CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury, burns, electrical shock or fire.
www.aeg.com 2. PRODUCT DESCRIPTION 1 2 3 12 11 9 10 8 7 4 6 5 1 Top spray arm 7 Air vent 2 Upper spray arm 8 Rinse aid dispenser 3 Lower spray arm 4 Filters 9 Detergent dispenser 10 Cutlery basket 5 Rating plate 11 Lower basket 6 Salt container 12 Upper basket 3.
ENGLISH 1 On/off button 5 Delay button 2 Program button 3 Programme indicators 6 Start button 4 Display 8 Option button Indicators 7 Indicators Description Multitab indicator. ÖKO PLUS indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates. Delay indicator. Door indicator. It comes on when the door is not closed. 4.
www.aeg.com Programme 5) Degree of soil Type of load Programme phases Options Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry ÖKO PLUS Multitab 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 2) This programme has a high temperature rinsing phase for better hygiene results.
ENGLISH If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Set the water softener to the highest level. 2. Make sure that the salt container and the rinse aid dispenser are full. 3. Start the shortest programme with a rinsing phase, without detergent and without dishes. 4. Adjust the water softener to the water hardness in your area. 5. Adjust the released quantity of rinse aid. 23 5.
www.aeg.com • The indicators (B) and (C) go off. • The indicator (A) continues to flash. • The display shows the current setting of the water softener, e.g. = level 5. 4. Press Program again and again to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. How to adjust the level of the water softener 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. 2.
ENGLISH 25 7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. • If you use the combi detergent tablets, activate the Multitab option. 5.
www.aeg.com • The indicators of the phases that are foreseen for the programme go off. 3. Press Start to start the countdown. • The countdown starts to decrease with steps of 1 hour. When the countdown is completed, the programme starts. The indicator of the running phase comes on. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption.
ENGLISH • Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes. Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging. 8.3 Loading the baskets Refer to the supplied leaflet with examples of the load of the baskets. • Only use the appliance to wash items that are dishwasher-safe.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
ENGLISH Problem 29 Possible solution Make sure that there is not a damaged fuse in the fuse box. The programme does not start. Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
www.aeg.com 3. Press Option . • The indicators (A) and (C) go off. • The indicator (B) continues to flash. • The display shows the current setting of the rinse aid dispenser. Off 4. Press Option to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. On 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate.
FRANÇAIS 31 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2. DESCRIPTION DE L'APPAREIL 1 2 3 12 11 9 10 8 7 4 6 5 1 Bras d'aspersion supérieur 7 Fente d'aération 2 Bras d'aspersion intermédiaire 8 Distributeur de liquide de rinçage 3 Bras d'aspersion inférieur 4 Filtres 9 Distributeur de produit de lavage 10 Panier à couverts 5 Plaque signalétique 11 Panier inférieur 6 Réservoir de sel régénérant 12 Panier supérieur 3.
FRANÇAIS 1 Touche Marche/Arrêt 5 Touche Delay 2 Touche Program 3 Voyants des programmes 6 Touche Start 4 Affichage 8 Touche Option Voyants 35 7 Voyants Description Voyant Multitab. Voyant ÖKO PLUS. Voyant de phase de lavage. Voyant de phase de rinçage. Voyant de phase de séchage. Voyant de fin. Voyant du réservoir de liquide de rinçage. Ce voyant est éteint pendant le déroulement du programme. Voyant du réservoir de sel régénérant. Ce voyant est éteint pendant le déroulement du programme.
www.aeg.com Programme 4) 5) Degré de salissure Type de charge Phases du programme Options Vaisselle fraîchement salie Vaisselle et couverts Lavage à 60 °C Rinçage Multitab Normalement sale Vaisselle et couverts Prélavage Lavage à 50 °C Rinçages Séchage ÖKO PLUS Multitab 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme.
FRANÇAIS 37 5. OPTIONS Activez ou désactivez les options avant de démarrer un programme. Vous ne pouvez pas activer ni désactiver les options pendant le déroulement d'un programme. Si vous avez activé une ou plusieurs options, assurez-vous que les voyants correspondants sont allumés avant le démarrage du programme. 5.1 Fonction Multitab Activez cette option uniquement si vous utilisez des pastilles de détergent multifonctions. Cette option désactive le débit du liquide de rinçage et du sel régénérant.
www.aeg.com 6.1 Réglage de l'adoucisseur d'eau Réglage de l'adoucisseur d'eau Dureté de l'eau Degrés allemands (°dH) Degrés français (°fH) mmol/l Degrés Clarke Niveau 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.
FRANÇAIS 39 6.2 Remplissage du réservoir de sel régénérant 1. 2. 3. 4. 5. Tournez le couvercle vers la gauche et ouvrez le réservoir de sel régénérant. Mettez 1 litre d'eau dans le réservoir de sel régénérant (uniquement la première fois). Remplissez le réservoir avec du sel régénérant. Enlevez le sel qui se trouve autour de l'ouverture du réservoir de sel régénérant. Tournez le couvercle vers la droite pour fermer le réservoir de sel régénérant.
www.aeg.com • Si le voyant du réservoir de sel régénérant est allumé, remplissez le réservoir. • Si le voyant du liquide de rinçage est allumé, remplissez le distributeur de liquide de rinçage. 3. Chargez les paniers. 4. Ajoutez du produit de lavage. • Si vous utilisez des pastilles de détergent multifonctions, activez l'option Multitab. 5. Réglez et lancez le programme adapté au type de vaisselle et au degré de salissure. 7.1 Utilisation du produit de lavage A 1. B 2. 30 3.
FRANÇAIS 41 • Les voyants des phases prévues dans le programme sélectionné s'éteignent. 3. Appuyez sur la touche Start pour lancer le compte à rebours. • Le décompte démarre et s'effectue par paliers d'une heure. Lorsque le décompte est terminé, le programme démarre. Le voyant correspondant à la phase en cours s'allume À la fin du programme Ouverture de la porte au cours du fonctionnement de l'appareil 0 s'affiche et le voyant de fin s'allume. 1.
www.aeg.com cher la vaisselle sans laisser de traînées ni de taches. • Les pastilles de détergent multifonctions contiennent du produit de lavage, du liquide de rinçage et d'autres adjuvants. Assurez-vous que ces pastilles sont adaptées à la dureté de l'eau de votre région. Reportez-vous aux instructions figurant sur l'emballage de ces produits. • Les tablettes de détergent ne se dissolvent pas complètement durant les programmes courts.
FRANÇAIS 43 9.1 Nettoyage des filtres C 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante. Avant de remettre le filtre (B) en place, assurez-vous qu'il ne reste aucun résidu alimentaire ni salissure à l'intérieur ou autour du bord du collecteur d'eau. C A B A1 3. 4. 5. A2 6. 7. Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C).
www.aeg.com 10. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou s'arrête en cours de programme. Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • - L'appareil ne se vidange pas. - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications.
FRANÇAIS 45 10.1 Si les résultats de lavage et de séchage ne sont pas satisfaisants 10.2 Comment activer le distributeur de liquide de rinçage Traînées blanchâtres ou pellicules bleuâtres sur les verres et la vaisselle • La quantité de liquide de rinçage libérée est trop importante. Placez le sélecteur de dosage du liquide de rinçage sur le niveau le plus faible. • La quantité de produit de lavage est excessive. 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil.
www.aeg.com Pression de l'arrivée d'eau Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W max. 60 °C 12 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce).
DEUTSCH 47 INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
DEUTSCH Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 9 10 8 7 4 6 5 1 Oberer Sprüharm 7 Lüftungsöffnung 2 Mittlerer Sprüharm 8 Klarspülmittel-Dosierer 3 Unterer Sprüharm 4 Filter 9 Reinigungsmittelbehälter 10 Besteckkorb 5 Typenschild 11 Unterkorb 6 Salzbehälter 12 Oberkorb 3.
DEUTSCH 1 Taste „Ein/Aus“ 5 Taste Delay 2 Taste Program 3 Programm-Kontrolllampen 6 Taste Start 4 Display 8 Taste Option Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Multitab“ Kontrolllampe „ÖKO PLUS“. Kontrolllampe „Hauptspülgang“. Kontrolllampe „Klarspülphase“. Kontrolllampe „Trocknungsphase“. Kontrolllampe „Programmende“. Kontrolllampe „Klarspülmittel“. Diese Kontrolllampe erlischt während des Programmbetriebs. Kontrolllampe „Salz“.
www.aeg.com Programm 4) 5) Verschmutzungsgrad Beladung Programmphasen Optionen Vor kurzem benutztes Geschirr Geschirr und Besteck Hauptspülgang 60 °C Multitab Spülgang Normal verschmutzt Geschirr und Besteck Vorspülen ÖKO PLUS Hauptspülgang 50 °C Multitab Spülgänge Trocknen 1) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben. Es stellt dann automatisch die Wassertemperatur und -menge, den Energieverbrauch und die Programmdauer ein.
DEUTSCH 53 5. OPTIONEN Schalten Sie die Optionen vor dem Programmstart ein oder aus. Sie können die Optionen nicht ein- oder ausschalten, wenn ein Programm angelaufen ist. Haben Sie eine oder mehrere Optionen eingeschaltet, prüfen Sie, ob die entsprechenden Kontrolllampen leuchten, bevor Sie das Programm starten. 5.1 Multitab Schalten Sie diese Option nur ein, wenn Sie Kombi-Reinigungstabletten verwenden. Mit der Option „Multitab“ wird die Zufuhr von Klarspülmittel und Salz ausgeschaltet.
www.aeg.com 6.1 Einstellen des Wasserenthärters WasserenthärterEinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Stufe 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.
DEUTSCH 55 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
www.aeg.com • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. • Wenn Sie die Kombi-Reinigungstabletten verwenden, schalten Sie die Option Multitab ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
DEUTSCH • Die Phasenanzeigen des gewählten Spülprogramms erlöschen. 3. Drücken Sie „Start“, um den Countdown zu starten. • Die Anzeige der Zeitvorwahl nimmt in Schritten von jeweils 1 Stunde ab. Nach Ablauf der Zeitvorwahl wird das Programm gestartet. Die Anzeige für das laufende Programm leuchtet. Öffnen der Tür während eines laufenden Programms Wenn Sie die Tür öffnen, unterbricht das Gerät das Programm. Wenn Sie die Tür wieder schließen, läuft das Programm ab dem Zeitpunkt der Unterbrechung weiter.
www.aeg.com andere Zusätze. Achten Sie darauf, dass die Tabletten der Wasserhärte in Ihrer Region entsprechen. Beachten Sie die Anweisungen auf der Reinigungsmittelverpackung. • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge.
DEUTSCH 59 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
www.aeg.com 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
DEUTSCH Werden andere Alarmcodes im Display angezeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu niedrig.
www.aeg.com Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W 12 Ausgeschaltet 0.10 W 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol .
DEUTSCH 63
117915111-A-382013 www.aeg.