FAVORIT 65402 VI0P EN User manual FR Notice d'utilisation ES Manual de instrucciones 2 17 33
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 2. PRODUCT DESCRIPTION 1 2 11 10 9 8 7 5 4 6 1 Upper spray arm 3 • When the programme starts to operate, the red light comes on and stays on for all the duration of the programme. • When the programme is completed, the green light comes on. • When the appliance has a malfunction, the red light flashes. 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser The Beam-on-Floor goes off when the appliance is deactivated.
www.aeg.com 1 On/off button 6 ExtraHygiene button 2 Display 3 Delay button 7 Multitab button 4 Programme button (down) 9 Indicators 8 RESET button 5 Programme button (up) Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. End indicator. 4.
ENGLISH 7 Consumption values Programme1) Duration (min) Energy (kWh) Water (l) 1 40 - 150 0.5 - 1.2 6 - 11 2 130 - 150 1.1 - 1.2 10 - 11 3 30 0.8 7 4 195 0.79 8.9 5 70 - 80 0.6 - 0.9 10 - 11 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.
www.aeg.com 2. Make sure that the salt container and the rinse aid dispenser are full. 3. Start the shortest programme with a rinsing phase, without detergent and without dishes. 4. Adjust the water softener to the water hardness in your area. 5. Adjust the released quantity of rinse aid. 2. Press and hold, at the same time, buttons (4) and (5) until the indicators of buttons (3), (4) and (5) start to flash. 3. Press button (5), • The indicators of buttons (3) and (4) go off.
ENGLISH 9 Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 11 7.1 Setting and starting a programme pliance continues from the point of interruption. Setting mode Cancelling the delay start while the countdown operates For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when the display shows 2 horizontal status bars. If the control panel does not show this condition, press RESET. When you cancel the delay start, also the programme is cancelled. 1.
www.aeg.com 8. HINTS AND TIPS 8.1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. It is important to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of dishwasher salt and water. 8.
ENGLISH 13 9. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 9.1 Cleaning the filters 1. Turn the filter (A) counterclockwise and remove it. 2. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water.
www.aeg.com 10. TROUBLESHOOTING The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. With some problems, the display shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. WARNING! Deactivate the appliance before you do the checks. Problem Possible solution You cannot activate the appliance.
ENGLISH Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. • The quality of the detergent can be the cause. Dishes are wet • The programme is without a drying phase or with a low temperature drying phase. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the combi detergent tablets can be the cause.
www.aeg.com 12. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
FRANÇAIS 17 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2. DESCRIPTION DE L'APPAREIL 1 2 11 10 9 8 7 1 Bras d'aspersion supérieur 2 Bras d'aspersion inférieur 3 Filtres 4 Plaque signalétique 5 Réservoir de sel régénérant 6 Sélecteur de dureté de l'eau 7 Distributeur de liquide de rinçage 8 Distributeur de produit de lavage 9 Panier à couverts 10 Panier inférieur 11 Panier supérieur 2.1 Beam-on-Floor Le faisceau Beam-on-Floor est une lumière projetée sur le sol, sous la porte de l'appareil.
FRANÇAIS 3. BANDEAU DE COMMANDE 2 1 3 4 5 6 7 8 9 1 Touche Marche/Arrêt 6 Touche ExtraHygiene 2 Affichage 7 Touche Multitab 3 Touche Delay 8 Touche RESET 4 Touche Programme (bas) 9 Voyants 5 Touche Programme (haut) Voyants Description Voyant du réservoir de sel régénérant. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant du réservoir de liquide de rinçage. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant de fin. 4.
www.aeg.com Programme Degré de salissure Type de charge Phases du programme 5 Normalement ou légèrement sale Vaisselle fragile et verres Lavage à 45 °C Rinçages Séchage Options 1) L'appareil détecte le degré de salissure et la quantité de vaisselle dans les paniers. Il règle automatiquement la température ainsi que le volume d'eau, la consommation d'énergie et la durée du programme. 2) Ce programme comprend une phase de rinçage à haute température, pour des résultats plus hygiéniques.
FRANÇAIS 23 5. OPTIONS 5.1 ExtraHygiene Cette option fournit des résultats plus hygiéniques. Au cours de la phase de rinçage, la température reste à 70 °C pendant au moins 10 minutes. Comment activer l'option ExtraHygiene 1. Appuyez sur la touche ExtraHygiene. Le voyant correspondant s'allume. La durée réactualisée du programme s'affiche. • Si cette option n'est pas compatible avec le programme, le voyant correspondant clignote rapidement 3 fois puis s'éteint. 5.
www.aeg.com 6. AVANT LA PREMIÈRE UTILISATION 1. Assurez-vous que le niveau réglé pour l'adoucisseur d'eau correspond à la dureté de l'eau de votre région. Dans le cas contraire, réglez le niveau de l'adoucisseur d'eau. Contactez votre compagnie des eaux pour connaître la dureté de l'eau de votre région. 2. Remplissez le réservoir de sel régénérant. 3. Remplissez le distributeur de liquide de rinçage. 4. Ouvrez le robinet d'eau. 5.
FRANÇAIS 25 Réglage manuel Tournez le sélecteur de dureté de l'eau sur la position 1 ou 2. Réglage électronique 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». 2. Maintenez enfoncées les touches (4) et (5) simultanément, jusqu'à ce que les voyants des touches (3), (4) et (5) clignotent. 3. Appuyez sur la touche (3). • Les voyants des touches (4) et (5) s'éteignent.
www.aeg.com 6.3 Remplissage du distributeur de liquide de rinçage 1. B A M AX 4 3 2 1 + - C D Appuyez sur le bouton d'ouverture (D) pour ouvrir le couvercle (C). 2. Remplissez le distributeur de liquide de rinçage (A), sans dépasser le repère « max ». 3. Si le liquide de rinçage déborde, épongez-le avec un chiffon absorbant pour éviter tout excès de mousse. 4. Fermez le couvercle. Assurez-vous que le bouton d'ouverture se verrouille correctement.
FRANÇAIS • Le numéro du programme clignote sur l'affichage. • Si vous le souhaitez, vous pouvez définir des options compatibles. 4. Fermez la porte de l'appareil ; le programme démarre. Le décompte de la durée du programme démarre et s'effectue par paliers d'une minute. Démarrage d'un programme avec départ différé 1. Sélectionnez le programme. 2. Appuyez sur la touche Delay à plusieurs reprises jusqu'à ce que l'affichage indique le délai choisi pour le départ différé (de 1 à 24 heures).
www.aeg.com 8.2 Utilisation de sel régénérant, de liquide de rinçage et de produit de lavage • Utilisez uniquement du sel régénérant, du liquide de rinçage et du produit de lavage conçus pour les lave-vaisselle. D'autres produits peuvent endommager l'appareil. • Lors de la dernière phase de rinçage, le liquide de rinçage permet de sécher la vaisselle sans laisser de traînées ni de taches.
FRANÇAIS 29 9. ENTRETIEN ET NETTOYAGE AVERTISSEMENT Avant toute opération d'entretien, éteignez l'appareil et débranchez la prise secteur. Les filtres sales et les bras d'aspersion obstrués diminuent les résultats de lavage. Contrôlez-les régulièrement et nettoyez-les si nécessaire. 9.1 Nettoyage des filtres 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante.
www.aeg.com 10. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou s'arrête en cours de programme. Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • - L'appareil ne se vidange pas. - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications.
FRANÇAIS lecteur de dosage du liquide de rinçage sur le niveau le plus faible. • La quantité de produit de lavage est excessive. Taches et traces de gouttes d'eau séchées sur les verres et la vaisselle • La quantité de liquide de rinçage libérée n'est pas suffisante. Placez le sélecteur de dosage du liquide de rinçage sur un niveau plus élevé. • Il se peut que la qualité du produit de lavage soit en cause.
www.aeg.com Pression de l'arrivée d'eau Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W max. 60 °C 9 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce).
ESPAÑOL 33 ÍNDICE DE MATERIAS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCCIONES DE SEGURIDAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPCIÓN DEL PRODUCTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PANEL DE MANDOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCCIONES DE SEGURIDAD Antes de instalar y utilizar el aparato, lea atentamente las instrucciones facilitadas. El fabricante no se hace responsable de los daños y lesiones causados por una instalación y uso incorrectos. Guarde siempre las instrucciones junto con el aparato para futuras consultas. 1.1 Seguridad de niños y personas vulnerables ADVERTENCIA Existe riesgo de sufrir asfixia, lesiones o incapacidad permanente.
ESPAÑOL ADVERTENCIA Voltaje peligroso. • Si la manguera de entrada de agua está dañada, desconecte el aparato inmediatamente de la toma de corriente. Póngase en contacto con el servicio técnico para cambiar la manguera de entrada de agua. 1.
www.aeg.com 2. DESCRIPCIÓN DEL PRODUCTO 1 2 11 10 9 8 7 1 Brazo aspersor intermedio 2 Brazo aspersor inferior 3 Filtros 4 Placa de características 5 Depósito de sal 6 Selector de dureza del agua 7 Dosificador de abrillantador 8 Dosificador de detergente 9 Cesto para cubiertos 10 Cesto inferior 11 Cesto superior 2.1 Beam-on-Floor Beam-on-Floor es una luz que se muestra en el suelo bajo la puerta del aparato.
ESPAÑOL 3. PANEL DE MANDOS 2 1 3 4 5 6 7 8 9 1 Tecla de encendido/apagado 6 Tecla ExtraHygiene 2 Pantalla 7 Tecla Multitab 3 Tecla Delay 8 Tecla RESET 4 Tecla de programa (descendente) 9 Indicadores 5 Tecla de programa (ascendente) Indicadores Descripción Indicador de sal. Siempre está apagado mientras el programa está en funcionamiento. Indicador de abrillantador. Siempre está apagado mientras el programa está en funcionamiento. Indicador de fin. 4.
www.aeg.com Programa Grado de suciedad Tipo de carga Fases del programa 5 Suciedad normal o ligera Vajilla y cristalería finas Lavado 45 °C Aclarados Secado Opciones 1) El aparato detecta el tipo de suciedad y la cantidad de objetos que hay en los cestos. Ajusta automáticamente la temperatura y la cantidad del agua, el consumo de energía y la duración del programa. 2) Este programa tiene una fase de aclarado a alta temperatura para obtener resultados más higiénicos.
ESPAÑOL 39 5. OPCIONES 5.1 ExtraHygiene Con esta opción, obtendrá resultados más higiénicos. Durante la fase de aclarado, la temperatura se mantiene a 70 °C durante al menos 10 minutos. Cómo activar la opción ExtraHygiene 1. Pulse ExtraHygiene. Se enciende el indicador correspondiente. En la pantalla se puede ver la actualización de la duración del programa. • Si la opción no es aplicable al programa, el indicador correspondiente parpadea rápidamente 3 veces y después se apaga. 5.
www.aeg.com 4. Abra la llave de paso. 5. El interior del aparato puede tener restos. Inicie un programa para elimi- narlos. No utilice detergente ni cargue los cestos. 6.1 Ajuste del descalcificador de agua Ajuste del descalcificador de agua Dureza del agua Grados alemanes (°dH) Grados franceses (°fH) mmol/l Grados Clark Manual Electrónico 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.
ESPAÑOL • Las señales acústicas funcionan de la siguiente manera: cinco señales acústicas intermitentes = nivel 5. • En la pantalla aparece el ajuste actual del descalcificador, p. ej., = nivel 5. 41 4. Pulse la tecla (3) repetidamente para cambiar el ajuste. 5. Pulse la tecla de encendido/apagado para apagar el aparato y confirmar el ajuste. 6.2 Llenar el depósito de sal 1. 2. 3. 4. 5. Abra el depósito de sal girando la tapa hacia la izquierda.
www.aeg.com 2. Pulse la tecla de encendido/apagado para encender el aparato. Asegúrese de que el aparato se encuentra en modo de ajuste; consulte “Ajuste e inicio de un programa”. • Si el indicador de sal está encendido, llene el depósito. • Si el indicador de abrillantador está encendido, llene el dosificador de abrillantador. 3. Cargue los cestos. 4. Añada el detergente. • Si utiliza pastillas de detergente combinado, active la opción Multitab. 5.
ESPAÑOL Si no pulsa la tecla de encendido/apagado, la función AUTO OFF desactivará automáticamente el aparato unos minutos después de haber finalizado el programa. Esto ayuda a reducir el consumo de energía. 43 • Vacíe primero el cesto inferior y, a continuación, el superior. • Puede haber restos de agua en los laterales y en la puerta del aparato. El acero inoxidable se enfría con mayor rapidez que los platos. Importante • Deje enfriar la vajilla antes de retirarla del aparato.
www.aeg.com • Coloque los objetos ligeros en el cesto superior. Asegúrese de que no se mueven. • Antes de iniciar un programa, compruebe que los brazos aspersores giran sin obstrucción. 8.4 Antes del inicio de un programa Compruebe que: • Los filtros están limpios y bien instalados. • Los brazos aspersores no están obstruidos. • La posición de los objetos en los cestos es correcta. • El programa es adecuado para el tipo de carga y el grado de suciedad. • Se utiliza la cantidad correcta de detergente.
ESPAÑOL 6. 7. 45 Asegúrese de que el filtro (B) está colocado correctamente en las dos guías (C). Monte el filtro (A) y vuelva a colocarlo en el filtro (B).Gírelo hacia la derecha hasta que encaje. Una posición incorrecta de los filtros puede dañar el aparato y provocar resultados de lavado no satisfactorios. 9.2 Limpieza de los brazos aspersores 9.4 Limpieza del interior No retire los brazos aspersores.
www.aeg.com Problema Posible solución Asegúrese de que la presión del agua no sea demasiado baja. Solicite información a la compañía local de suministro de agua. Compruebe que el grifo no esté obstruido. Asegúrese de que el filtro de la manguera de entrada no está obstruido. Asegúrese de que la manguera de entrada no esté doblada ni retorcida. El aparato no desagua. Compruebe que el desagüe no esté obstruido. Asegúrese de que el tubo de desagüe no esté doblado ni retorcido.
ESPAÑOL Dosificador de abrillantador apagado. Dosificador de abrillantador encendido. 47 5. Pulse la tecla de encendido/apagado para apagar el aparato y confirmar el ajuste. 6. Ajuste la cantidad de abrillantador. 7. Llene el dosificador de abrillantador. 4. Pulse la tecla (4) para cambiar el ajuste. 11. INFORMACIÓN TÉCNICA Medidas Ancho / Alto / Fondo (mm) Conexión eléctrica Consulte la placa de características.
117909380-A-022013 www.aeg.