PL Instrukcja obsługi Zmywarka FAVORIT 66702 IM0P
www.aeg.com SPIS TREŚCI 1. INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA................................................. 3 2. WSKAZÓWKI DOTYCZĄCE BEZPIECZEŃSTWA.................................................. 4 3. OPIS URZĄDZENIA................................................................................................. 6 4. PANEL STEROWANIA.............................................................................................7 5. PROGRAMY.............................................................
POLSKI 1. 3 INFORMACJE DOTYCZĄCE BEZPIECZEŃSTWA Przed instalacją i rozpoczęciem eksploatacji urządzenia należy uważnie zapoznać się z załączoną instrukcją obsługi. Producent nie odpowiada za uszkodzenia i obrażenia ciała spowodowane nieprawidłową instalacją i eksploatacją. Należy zachować instrukcję wraz z urządzeniem do wykorzystania w przyszłości. 1.
www.aeg.com do obsługi przez klientów w hotelach, motelach, obiektach noclegowych i innych obiektach mieszkalnych. Nie zmieniać parametrów technicznych urządzenia. Robocze ciśnienie wody (minimalne i maksymalne) musi mieścić się w granicach 0.5 (0.05) / 8 (0.8) barów (Mpa). Maksymalna liczba kompletów wynosi 15. Jeśli przewód zasilający jest uszkodzony, ze względów bezpieczeństwa musi go wymienić producent, autoryzowane centrum serwisowe lub inna wykwalifikowana osoba.
POLSKI 2.2 Podłączenie do sieci elektrycznej OSTRZEŻENIE! Występuje zagrożenie pożarem i porażeniem prądem elektrycznym. • • • • • • • • • Urządzenie musi być uziemione. Należy upewnić się, że informacje o podłączeniu elektrycznym podane na tabliczce znamionowej są zgodne z parametrami instalacji zasilającej. W przeciwnym razie należy skontaktować się z elektrykiem. Należy używać wyłącznie prawidłowo zamontowanego gniazda elektrycznego z uziemieniem. Nie stosować rozgałęźników ani przedłużaczy.
www.aeg.com 2.5 Utylizacja • OSTRZEŻENIE! Występuje zagrożenie odniesieniem obrażeń ciała lub uduszeniem. Odłączyć urządzenie od źródła zasilania. Odciąć i wyrzucić przewód zasilający. Wymontować zatrzask drzwi, aby uniemożliwić zamknięcie się dzieci lub zwierząt w urządzeniu. • • 3.
POLSKI 4. PANEL STEROWANIA 1 2 8 1 2 3 4 5 3 4 7 Przycisk wł./wył. Przycisk Program Wskaźniki programów Wyświetlacz Przycisk Delay 5 6 6 Przycisk Option 7 Wskaźniki 8 Przycisk Start 4.1 Wskaźniki Wskaźnik Opis Faza zmywania. Włącza się podczas fazy zmywania. Faza płukania. Włącza się podczas fazy płukania. Faza suszenia. Zapala się podczas fazy suszenia. Wskaźnik zakończenia programu. Wskaźnik funkcji Multitab. Wskaźnik soli. W trakcie programu wskaźnik ten jest zawsze wyłączony.
www.aeg.com 5.
POLSKI 9 5.1 Parametry eksploatacyjne Program1) Zużycie wody (l) Zużycie energii (kWh) Czas trwania (min) 11 0.961 225 7 - 14 0.6 - 1.4 40 - 150 12.5 - 14.5 1.4 - 1.6 154 - 164 12 - 14 0.7 - 0.9 75 - 85 10 0.9 30 9 - 10 1.0 - 1.2 219 - 229 1) Parametry eksploatacyjne mogą ulec zmianie w zależności od ciśnienia i temperatury wody, zmian w napięciu zasilania, użytych opcji oraz ilości naczyń. 5.
www.aeg.com Twardość wody jest mierzona w równoważnych skalach. lokalnym zakładzie wodociągowym można uzyskać informację na temat twardości wody. Istotne jest ustawienie właściwego poziomu zmiękczania wody, aby zapewnić dobre rezultaty zmywania. Zmiękczanie powinno być dostosowane do stopnia twardości wody doprowadzonej do urządzenia. W Twardość wody Stopnie nie‐ mieckie (°dH) Stopnie fran‐ cuskie (°fH) mmol/l Stopnie Clarka Poziom zmiękcza‐ nia wody 47 - 50 84 - 90 8.4 - 9.
POLSKI Regulacja dozowania płynu nabłyszczającego Urządzenie musi być w trybie wyboru programów. 1. Aby uruchomić tryb użytkownika, nacisnąć jednocześnie i przytrzymać przyciski Delay i Option, aż , i wskaźniki zaczną migać, a wyświetlacz będzie pusty. 2. Nacisnąć Delay. • Wskaźniki wyłączą się. • będzie nadal Wskaźnik migał. Na wyświetlaczu pojawi się • i aktualne ustawienie: np. = poziom 4. – Poziom dozowania płynu nabłyszczającego można ustawić od 0A do 6A.
www.aeg.com Nie wszystkie opcje są ze sobą zgodne. Po wybraniu niezgodnych ze sobą opcji urządzenie automatycznie wyłączy jedną lub większą liczbę opcji. Tylko wskaźniki aktywnych opcji pozostaną wówczas włączone. 7.1 Multitab Włączyć tę opcję stosując tabletki wieloskładnikowe z solą, płynem nabłyszczającym i detergentem. Mogą one zawierać także inne środki do mycia lub płukania. Opcja ta powoduje wyłączenie dozowania soli. Nie włącza się wskaźnik soli.
POLSKI 5. Uruchomić program, aby usunąć wszelkie pozostałości poprodukcyjne mogące wciąż znajdować się w urządzeniu. Nie należy stosować detergentu ani umieszczać naczyń w koszach. Po uruchomieniu programu urządzenie zaczyna doprowadzać żywicę do zmiękczacza wody – może to potrwać do 5 minut. Może wydawać się, że urządzenie nie pracuje. Program rozpoczyna się dopiero po zakończeniu tego procesu. Proces ten jest powtarzany co pewien czas. 8.1 Zbiornik soli 13 5.
www.aeg.com 9. CODZIENNA EKSPLOATACJA 1. Odkręcić zawór wody. 2. Nacisnąć przycisk wł./wył., aby włączyć urządzenie. Upewnić się, że urządzenie jest w trybie wyboru programu. • Jeśli świeci się wskaźnik soli, napełnić zbiornik soli. • Jeśli świeci się wskaźnik płynu nabłyszczającego, napełnić dozownik płynu nabłyszczającego. 3. Załadować kosze. 4. Dodać detergent. Aby stosować tabletki wieloskładnikowe, należy włączyć funkcję Multitab. 5.
POLSKI 15 Po zakończeniu odliczania czasu program uruchomi się automatycznie i włączy się wskaźnik bieżącej fazy programu. Wskaźnik opóźnienia rozpoczęcia programu wyłączy się. Przed uruchomieniem nowego programu należy upewnić się, że w dozowniku znajduje się detergent. Otwieranie drzwi w trakcie pracy urządzenia Po zakończeniu programu na wyświetlaczu pojawi się symbol 0:00 oraz zaświeci się wskaźnik zakończenia programu. Otworzenie drzwi w trakcie działania programu zatrzymuje urządzenie.
www.aeg.com 10.2 Stosowanie soli, płynu nabłyszczającego i detergentu • • • • • Należy stosować wyłącznie sól, płyn nabłyszczający i detergent do zmywarek. Inne produkty mogą uszkodzić urządzenie. Tabletki wieloskładnikowe są zwykle przeznaczone do użycia z wodą o twardości do 21°dH. Gdy twardość wody jest większa, należy oprócz tabletek wieloskładnikowych stosować także płyn nabłyszczający i sól.
POLSKI • • program jest odpowiedni dla danego rodzaju załadunku i stopnia zabrudzenia; użyto prawidłową ilość detergentu. 10.6 Opróżnianie koszy 1. Przed wyjęciem naczyń ze zmywarki poczekać, aż wystygną. Gorące naczynia łatwo ulegają uszkodzeniu. 2. Najpierw wyjmować naczynia z dolnego kosza, a potem z górnego. Po zakończeniu programu po bokach oraz na drzwiach urządzenia może wciąż znajdować się woda. 11.
www.aeg.com UWAGA! Nieprawidłowe umiejscowienie filtrów może skutkować niezadowalającymi efektami zmywania i uszkodzeniem urządzenia. 11.2 Czyszczenie górnego ramienia spryskującego 5. Upewnić się, że wokół krawędzi osadnika nie znajdują się resztki żywności ani zanieczyszczenia. 6. Włożyć na miejsce filtr płaski (A). Upewnić się, że jest prawidłowo umieszczony pod 2 prowadnicami. 7. Włożyć filtry (B) i (C). 8. Włożyć filtr (B) do filtra płaskiego (A).
POLSKI 19 11.3 Czyszczenie obudowy • • • Czyścić urządzenie za pomocą wilgotnej szmatki. Używać wyłącznie neutralnych detergentów. Nie używać produktów ściernych, myjek do szorowania ani rozpuszczalników. 11.4 Czyszczenie wnętrza • 4. Aby zamocować ramię spryskujące do kosza, należy popchnąć je w górę w kierunku wskazanym przez dolną strzałkę i jednocześnie obrócić przeciwnie do ruchu wskazówek zegara, aż do zatrzaśnięcia.
www.aeg.com Problem i kod alarmowy Możliwa przyczyna i rozwiązanie Urządzenie nie włącza się. • • Program nie uruchamia się. • • • • Urządzenie nie napełnia się wodą. Na wyświetlaczu widoczne jest wskazanie . Urządzenie nie wypompo‐ wuje wody. Na wyświetlaczu widoczne jest wskazanie . • • • • • • • • • Włączyło się zabezpieczenie • przed zalaniem. Na wyświetlaczu widoczne jest wskazanie Upewnić się, że wtyczkę przewodu zasilającego włożo‐ no do gniazdka.
POLSKI Problem i kod alarmowy Możliwa przyczyna i rozwiązanie Niewielki wyciek z drzwi ur‐ ządzenia. • Trudno jest zamknąć drzwi urządzenia. • Grzechotanie/stukanie do‐ chodzące z wnętrza urząd‐ zenia. • Urządzenie powoduje wyz‐ walanie automatycznego wyłącznika. • 21 Urządzenie nie jest wypoziomowane. Poluzować lub dokręcić regulowane nóżki (jeśli dotyczy). Drzwi urządzenia nie są wyśrodkowane względem ko‐ mory. Wyregulować tylną nóżkę (jeśli dotyczy). • Urządzenie nie jest wypoziomowane.
www.aeg.com Problem Możliwa przyczyna i rozwiązanie Niezadowalające efekty sus‐ zenia. • • • Białawe smugi lub niebieska‐ wy nalot na szklankach i nac‐ zyniach. • • Naczynia pozostawały zbyt długo w zamkniętym ur‐ ządzeniu. Nie ma płynu nabłyszczającego lub dozowana jest je‐ go niewystarczająca ilość. Ustawić wyższy poziom do‐ zowania płynu nabłyszczającego. Przedmioty z tworzywa sztucznego mogą wymagać wytarcia ściereczką. Za dużo płynu nabłyszczającego.
POLSKI 23 Problem Możliwa przyczyna i rozwiązanie Nieprzyjemny zapach w ur‐ ządzeniu. • Patrz „Czyszczenie wnętrza”. Osad z kamienia na naczy‐ niach, w komorze zmywarki i po wewnętrznej stronie jej drzwi. • Patrz „Zmiękczacz wody”. Matowe, odbarwione lub wyszczerbione naczynia. • Upewnić się, że w urządzeniu zmywane są tylko przedmioty, które można myć w zmywarce. Ostrożnie wkładać i wyjmować naczynia z koszy. Na‐ leży zapoznać się z broszurą dotyczącą załadunku koszy.
www.aeg.com razem z odpadami domowymi. Należy zwrócić produkt do miejscowego punktu ponownego przetwarzania lub skontaktować się z odpowiednimi władzami miejskimi. recyklingu. Należy zadbać o ponowne przetwarzanie odpadów urządzeń elektrycznych i elektronicznych, aby chronić środowisko naturalne oraz ludzkie zdrowie.
POLSKI 25
www.aeg.
POLSKI 27
117901142-A-052015 www.aeg.