DE Benutzerinformation Geschirrspüler FAVORIT 67729 IM0P
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................... 4 3. GERÄTEBESCHREIBUNG...............................................................................................6 4. BEDIENFELD................................................................................................................... 7 5.
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Allgemeine Sicherheit • • • • • • • • • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com • Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. 1.
DEUTSCH • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker.
www.aeg.com 3.
DEUTSCH 4. BEDIENFELD 1 2 3 8 1 2 3 4 5 Taste „Ein/Aus“ Taste Program Programmkontrolllampen Display Taste Delay 4 7 5 6 6 Taste Option 7 Kontrolllampen 8 Taste Start 4.1 Kontrolllampen Kontrolllampe Beschreibung Hauptspülgang Leuchtet während des Hauptspülgangs auf. Spülgang Leuchtet während der Spülphasen auf. Trockenphase Leuchtet während der Trocknungsphase auf. Kontrolllampe Multitab Kontrolllampe Salz Sie erlischt während des Programmbetriebs.
www.aeg.com 5.
DEUTSCH Programm Verschmutzungsgrad Beladung 6) Programmphasen 9 Optionen • Normal versch• Vorspülen • Multitab mutzt • Hauptspülgang 50 • Geschirr und Bes°C teck • Spülgänge • Trocknen 1) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. (Dies ist das Standardprogramm für Prüfinstitute.) 2) Das Gerät erkennt den Verschmutzungsgrad und die Anzahl der Geschirrteile in den Körben.
www.aeg.com 6. EINSTELLUNGEN 6.1 Programmwahlmodus und Benutzermodus Wenn sich das Gerät im Programmwahlmodus befindet, kann ein Programm eingestellt und der Benutzermodus aufgerufen werden. Im Benutzermodus können folgende Einstellungen geändert werden: • Die Stufe des Wasserenthärters gemäß der Wasserhärte. • Ausschalten des KlarspülmittelDosierers, wenn Sie die Option Multitab ohne Klarspülmittel verwenden möchten. • Klarspülmittelstufe gemäß der erforderlichen Dosierung.
DEUTSCH Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH). mmol/l <4 <7 <0.7 11 Clarke Was- Einstellung für den serhärteWasserenthärter grade <5 1 2) 1) Werkseitige Einstellung 2) Verwenden Sie kein Salz bei diesen Werten. Einstellen des Wasserenthärters Einstellen der Zugabestufe für Klarspüler Das Gerät muss sich im Programmwahlmodus befinden. Das Gerät muss sich im Programmwahlmodus befinden. 1.
www.aeg.com Ist der Klarspülmittel-Dosierer ausgeschaltet, leuchtet die entsprechende Kontrolllampe nie. Ausschalten des KlarspülmittelDosierers Das Gerät muss sich im Programmwahlmodus befinden. 1. Halten Sie zum Aufrufen des Benutzermodus gleichzeitig Delay und Option gedrückt, bis die Kontrolllampen , und blinken und das Display nichts anzeigt. 2. Drücken Sie Start. • Die Kontrolllampen und erlöschen. • Die Kontrolllampe blinkt weiter.
DEUTSCH Das Display zeigt die aktualisierte Programmdauer an. 7.3 ExtraHygiene Diese Option sorgt für hygienischere Ergebnisse. Während der letzten Spülphase wird die Temperatur für mindestens 10 Minuten auf 70 °C gehalten. • Während der Trockenphase wird die Gerätetür von einer besonderen Vorrichtung einen Spaltbreit geöffnet. • Am Programmende werden Vorrichtung und Tür zurückgezogen. Das Gerät wird automatisch ausgeschaltet.
www.aeg.com Verwenden Sie kein Reinigungsmittel und beladen Sie die Körbe nicht. Wenn Sie ein Programm starten, kann es bis zu 5 Minuten dauern das Filterharz des Wasserenthärters zu regenerieren. Das Gerät scheint nicht zu arbeiten. Die Spülphase startet erst nach Abschluss dieses Vorgangs. Dieser Vorgang wird regelmäßig wiederholt. 8.1 Salzbehälter ACHTUNG! Verwenden Sie nur Spezialsalz für Geschirrspüler.
DEUTSCH 15 Füllen Sie den Klarspülmittel-Dosierer auf, wenn die Füllstandsanzeige für den Klarspüler (A) durchsichtig wird. 9. TÄGLICHER GEBRAUCH 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Benutzermodus befindet. • Füllen Sie den Salzbehälter auf, wenn die Kontrolllampe „Salz“ leuchtet. • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4.
www.aeg.com Starten eines Programms mit Zeitvorwahl 1. Wählen Sie ein Programm. 2. Drücken Sie die Taste Delay wiederholt, bis im Display die gewünschte Zeitvorwahl angezeigt wird (zwischen 1 und 24 Stunden). 3. Drücken Sie Start, um den Countdown zu starten. • Die Anzeige „Zeitvorwahl“ leuchtet, um den Start des Countdowns anzuzeigen. • Die Zeitvorwahl nimmt in Schritten von jeweils 1 Stunde ab. Nur in der letzten Stunde wird die Zeit minutenweise heruntergezählt.
DEUTSCH Sprüharmdüsen erreicht und gespült wird. Achten Sie darauf, dass das Geschirr sich weder berührt noch von anderem Geschirr verdeckt wird. • Sie können Geschirrspülreiniger, Klarspüler und Salz separat oder Kombi-Reinigungstabletten (z.B. „3in1“, „4in1“, „All-in-1“) verwenden. Befolgen Sie die Anweisungen auf der Verpackung. • Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein.
www.aeg.com • Ordnen Sie leichte Gegenstände im Oberkorb an. Achten Sie darauf, dass diese nicht verrutschen können. • Vergewissern Sie sich, dass sich der Sprüharm ungehindert bewegen kann, bevor Sie ein Programm starten. • Die Geschirrteile sind richtig in den Körben angeordnet. • Das Programm eignet sich für die Beladung und den Verschmutzungsgrad. • Die Reinigungsmittelmenge stimmt. 10.5 Vor dem Starten eines Programms 10.
DEUTSCH 19 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. 4. Reinigen Sie die Filter. 5. Achten Sie darauf, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. 6. Setzen Sie den flachen Filter (A) wieder ein.
www.aeg.com 11.4 Reinigung des Geräteinnenraums diese zu Fett- und Kalkablagerungen im Gerät führen. Um dieses zu vermeiden, wird empfohlen, mindestens zweimal im Monat Programme mit langer Laufzeit zu verwenden. • Reinigen Sie das Gerät und die Gummidichtung der Tür sorgfältig mit einem weichen, feuchten Tuch. • Wenn Sie regelmäßig Kurzprogramme verwenden, können 12. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen.
DEUTSCH Schalten Sie nach der Überprüfung das Gerät aus und wieder ein. Tritt das Problem erneut auf, wenden Sie sich an einen autorisierten Kundendienst. 21 Wenden Sie sich an einen autorisierten Kundendienst, wenn Alarmcodes angezeigt werden, die nicht in der Tabelle angegeben sind. 12.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend Problem Mögliche Abhilfe Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr. • Die zugegebene Klarspülmittelmenge ist zu hoch.
www.aeg.com Leistungsaufnahme Aus-Zustand (W) 0.10 1) Weitere Angaben finden Sie auf dem Typenschild. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 14. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
DEUTSCH 23
117906620-C-132014 www.aeg.