IT Istruzioni per l’uso Lavastoviglie FAVORIT 67732 M0P
www.aeg.com INDICE 1. INFORMAZIONI PER LA SICUREZZA............................................................................ 3 2. ISTRUZIONI DI SICUREZZA............................................................................................ 4 3. DESCRIZIONE DEL PRODOTTO................................................................................... 6 4. PANNELLO DEI COMANDI........................................................................................... 7 5. PROGRAMMI...............
ITALIANO 1. 3 INFORMAZIONI PER LA SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano come riferimento futuro. 1.
www.aeg.com • L'apparecchiatura deve essere collegata correttamente all'impianto idrico con i tubi nuovi forniti. I tubi usati non devono essere riutilizzati. 1.
ITALIANO • Solo per il Regno Unito e l'Irlanda. L'apparecchiatura è dotata di spina di alimentazione da 13 amp. Nel caso si rendesse necessario sostituire il fusibile nella spina di alimentazione, utilizzare il fusibile: 13 amp ASTA (BS 1362). 2.3 Collegamento dell’acqua • Accertarsi di non danneggiare i tubi di carico e scarico dell'acqua. • Prima di collegare l’apparecchiatura a tubazioni nuove o non utilizzate per un lungo periodo, far scorrere l’acqua finché non è limpida.
www.aeg.com 3.
ITALIANO 4. PANNELLO DEI COMANDI 1 2 8 1 2 3 4 5 Tasto On/Off Tasto Program Spie del programma Display Tasto Delay 3 4 7 5 6 6 Tasto Option 7 Spie 8 Tasto Start 4.1 Spie Spia Descrizione Fase di lavaggio. Si accende quando è in corso la fase di lavaggio. Fase di risciacquo. Si accende quando è in corso la fase di risciacquo. Fase di asciugatura. Si accende quando è in corso la fase di asciugatura. Spia di fine. Spia Multitab. Spia del sale. La spia è spenta durante l'esecuzione del programma.
www.aeg.com 5.
ITALIANO 9 5.1 Valori di consumo Programma 1) Acqua (l) Energia (kWh) Durata (min) 7.5 0.961 225 7 - 14 0.6 - 1.4 40 - 150 14 - 16 1.2 - 1.5 139 - 149 10.7 - 14.5 1.4 - 1.6 154 - 167 10 0.9 30 4 0.1 14 9 - 10 1.0 - 1.2 219 - 229 1) I valori possono variare a seconda della pressione e della temperatura dell'acqua, delle variazioni dell'alimentazione elettrica, delle opzioni selezionate e della quantità di stoviglie. 5.
www.aeg.com sui risultati di lavaggio e sull'apparecchiatura. La durezza dell'acqua dipende dal contenuto di questi minerali. La durezza dell'acqua è misurata in scale equivalenti. locale. Per informazioni sulla durezza dell’acqua nella propria zona è possibile rivolgersi all’ente erogatore locale. È importante impostare il livello corretto del decalcificatore dell'acqua per garantire buoni risultati di lavaggio.
ITALIANO Impostazione di fabbrica: livello 4. Come impostare il livello del brillantante L'apparecchiatura deve essere in modalità di selezione programma. 1. Per accedere alla modalità utente, tenere premuti contemporaneamente Delay e Option finché le spie , e iniziano a lampeggiare e il display è vuoto. 2. Premere Delay. • Le spie spengono. e si • La spia continua a lampeggiare. • Il display mostra l'impostazione corrente: ad es. = livello 4. – I livelli di brillantante vanno da 0A a 6A.
www.aeg.com Non tutte le opzioni sono compatibili tra loro. Se sono state selezione delle opzioni non compatibili, l'apparecchiatura ne disattiva automaticamente una o diverse. Solo le spie delle opzioni ancora attive rimangono accese. 7.1 Multitab Attivare questa opzione quando si utilizzano pastiglie multifunzione contenenti sale, brillantante e detersivo. Possono contenere anche altri agenti pulenti o di risciacquo. Questa opzione disattiva il rilascio di sale. La spia del sale non si accende.
ITALIANO 2. Riempire il contenitore del sale. 3. Riempire il contenitore del brillantante. 4. Aprire il rubinetto dell’acqua. 5. Avviare un programma per rimuovere possibili residui di lavorazione presenti all’interno dell’apparecchiatura. Non utilizzare il detersivo e non caricare stoviglie. Quando si avvia un programma, l'apparecchiatura può impiegare fino a 5 minuti per rigenerare la resina nel decalcificatore. Può sembrare che l'apparecchiatura non funzioni correttamente.
www.aeg.com Riempire il contenitore del brillantante quando la spia (A) diventa chiara. 9. UTILIZZO QUOTIDIANO 1. Aprire il rubinetto dell’acqua. 2. Premere il tasto On/Off per accendere l’apparecchiatura. Verificare che l'apparecchiatura sia in modalità di selezione programma. • Se la spia del sale è accesa, riempire il contenitore del sale. • Se la spia del brillantante è accesa, riempire il contenitore del brillantante. 3. Caricare i cestelli. 4. Aggiungere il detersivo.
ITALIANO per la partenza ritardata (da 1 a 24 ore). 3. Premere Start per avviare il conto alla rovescia. • La spia della partenza ritardata si accende per confermare l'avvio del conto alla rovescia. • Il conto alla rovescia inizia a diminuire ad intervalli di 1 ora. Solo l'ultima ora diminuisce ad intervalli di 1 minuto. Al termine del conto alla rovescia, il programma inizia e la spia della fase di lavaggio si accende. La spia della partenza ritardata si spegne.
www.aeg.com 10.2 Se si utilizzano sale, brillantante e detersivo • Utilizzare soltanto sale, brillantante e detersivo specifici per lavastoviglie. Altri prodotti possono danneggiare l'apparecchiatura. • Le pastiglie multifunzione sono generalmente adatte in zone con una durezza dell'acqua fino a 21°dH. Nelle zone che superano tale limite, il brillantante e il sale devono essere utilizzati insieme alle pastiglie multifunzione.
ITALIANO 10.6 Scaricare i cestelli 1. Lasciare raffreddare i piatti prima di estrarli dall'apparecchiatura. Le stoviglie calde possono essere più facilmente danneggiabili. 2. Vuotare prima il cestello inferiore e quindi quello superiore. 17 Al termine del programma, dell'acqua potrebbe rimanere sulle pareti e sulla porta dell'apparecchiatura. 11. PULIZIA E CURA ATTENZIONE! Prima di eseguire qualunque intervento di manutenzione, spegnere l'apparecchiatura ed estrarre la spina dalla presa.
www.aeg.com sporco, liberarli servendosi di un oggetto a punta fine. 11.3 Pulizia esterna • Pulire l'apparecchiatura con un panno inumidito e morbido. • Utilizzare solo detergenti neutri. • Non usare prodotti abrasivi, spugnette abrasive o solventi. 11.4 Pulizia interna 7. Rimontare i filtri (B) e (C). 8. Posizionare nuovamente il filtro (B) nel filtro piatto (A). Ruotarlo in senso orario finché non si blocca in posizione.
ITALIANO 19 Problema e codice allarme Possibile soluzione Non è possibile accendere l'apparecchiatura. • Verificare che la spina sia collegata alla presa elettrica. • Assicurarsi che il fusibile all'interno del quadro elettrico non sia danneggiato. Il programma non si avvia. • Controllare che la porta dell'apparecchiatura sia chiusa. • Premere Start. • Se è stato impostato il ritardo, annullare l'impostazione o attendere il termine del conto alla rovescia.
www.aeg.com Problema Possibile soluzione Le stoviglie sono bagnate. • Il programma non dispone di una fase di asciugatura oppure questa fase viene eseguita a bassa temperatura. • Il contenitore del brillantante è vuoto. • La causa potrebbe essere la qualità del brillantante. • La causa potrebbe essere la qualità del detersivo in pastiglie multifunzione.
ITALIANO 21
www.aeg.
ITALIANO 23
117895630-A-382014 www.aeg.