FAVORIT 77023 MOP EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • The water inlet hose has a safety valve and a sheath with an inner mains cable. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it.
ENGLISH 2. PRODUCT DESCRIPTION 2 1 3 4 13 12 10 9 11 7 8 6 5 1 Worktop 8 Water hardness dial 2 Top spray arm 9 Rinse aid dispenser 3 Upper spray arm 4 Lower spray arm 10 Detergent dispenser 5 Filters 12 Lower basket 6 Rating plate 13 Upper basket 11 Cutlery basket 7 Salt container 3.
www.aeg.com 1 On/off button 5 Delay button 2 Program button 3 Programme indicators 6 Start button 4 Display 8 Option button Indicators 7 Indicators Description Multitab indicator. ExtraHygiene indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates. Delay indicator. Door indicator.
ENGLISH Programme 5) Degree of soil Type of load Programme phases Options Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry ExtraHygiene Normal soil Crockery and cutlery Wash 55 °C Rinses ExtraHygiene 7 Normal or light soil Wash 45 °C Delicate crockery Rinses and glassware Dry 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration.
www.aeg.com 5. OPTIONS Activate or deactivate the options before the start of a programme. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. 5.1 Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase.
ENGLISH 9 6.1 Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 11 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: • All the programme indicators come on. • The display shows two horizontal status bars. If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode.
www.aeg.com Cancelling the delay start while the countdown operates Press Delay again and again until: • The display shows the programme duration. • The phase indicators come on. • The programme starts. Cancelling the programme Press and hold Delay and Start at the same time until: • All the programme indicators come on. • The display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. 1.
ENGLISH • Make sure that the spray arms can move freely before you start a programme. 8.3 Using salt, rinse aid and detergent • Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. • The rinse aid helps, during the last rinsing phase, to dry the dishes without streaks and stains. • Combi detergent tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area.
www.aeg.com 2. A1 3. 4. 5. A2 6. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms Do not remove the spray arms.
ENGLISH Problem The appliance does not fill with water. Possible cause Possible solution You did not press Start. Press Start. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. Cancel the delay start or wait for the end of the countdown. The water tap is closed. Open the water tap. The water pressure is too low. Contact your local water authority. 15 The water tap is clogged or Clean the water tap. there is limescale on it.
www.aeg.com 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash. 4. Press Option . • The indicators (A) and (C) go off. • The indicator (B) continues to flash. • The display shows the setting of the rinse aid dispenser. Off On 5. Press Option to change the setting. 6. Deactivate the appliance to confirm. 7. Adjust the released quantity of rinse aid. 8.
ENGLISH 17
www.aeg.
ENGLISH 19
117920451-A-202012 www.aeg.
