FAVORIT 77420 M0P FAVORIT 77420 W0P DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 2.
www.aeg.com 3. BEDIENFELD 1 Extra 3 2 Delay Quick 60MIN 55° Quick 4 Option 5 Program Delay Start Option 8 7 6 1 Taste „Ein/Aus“ 5 Delay-Taste 2 Program-Taste 3 Programmkontrolllampen 6 Option-Taste 4 Display 8 Start-Taste Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Klarspülmittel“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Salz“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Hauptspülgang“. Leuchtet während des Hauptspülgangs auf.
DEUTSCH 7 4.
www.aeg.com Verbrauchswerte Programm1) Dauer (Min.) Energieverbrauch (kWh) Wasser (l) 40 - 150 0.5 - 1.1 6 - 11 130 - 150 1.1 - 1.2 10 - 11 180 - 200 0.8 - 0.9 8 - 11 30 0.8 7 189 0.79 8.5 40 - 50 0.9 - 1.0 9 - 10 70 - 80 0.6 - 0.9 9 - 10 1) Druck und Temperatur des Wassers, Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Programmdauer und die Verbrauchswerte verändern.
DEUTSCH So schalten Sie die Option Multitab ein: 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. 2. Drücken Sie Option, bis die Kontrolllampe Multitab leuchtet. Die Option bleibt so lange eingeschaltet, bis Sie von Ihnen ausgeschaltet wird. Drücken Sie Option, bis die Kontrolllampe Multitab erlischt.
www.aeg.com WasserenthärterEinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.
DEUTSCH 11 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
www.aeg.com 6.3 Füllen des Klarspülmittel-Dosierers 1. B A M AX 4 3 2 1 + - C D Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Klarspülmittel-Dosierer (A) nicht über die Marke „max“ hinaus. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
DEUTSCH 7.2 Einstellen und Starten eines Programms Einstellmodus Für einige Einstellungen muss das Gerät im Einstellmodus sein. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Das Gerät befindet sich im Einstellmodus, wenn alle Programm-Kontrolllampen leuchten und im Display zwei horizontale Balken angezeigt werden. Wenn im Bedienfeld nicht diese Bedingung angezeigt wird, halten Sie gleichzeitig Delay und Option gedrückt, bis sich das Gerät im Einstellmodus befindet.
www.aeg.com Wichtig • Lassen Sie das Geschirr abkühlen, bevor Sie es aus dem Gerät nehmen. Heißes Geschirr ist stoßempfindlich. • Nehmen Sie das Geschirr zuerst aus dem Unterkorb und dann aus dem Oberkorb. • An den Innenseiten und an der Tür des Gerätes kann sich Wasser niederschlagen. Edelstahl kühlt schneller ab als Geschirr. 8. TIPPS UND HINWEISE 8.1 Der Wasserenthärter Hartes Wasser enthält viele Mineralien, die das Gerät beschädigen können und zu schlechten Spülergebnissen führen.
DEUTSCH • Ordnen Sie kleine Gegenstände in den Besteckkorb ein. • Ordnen Sie leichte Gegenstände im Oberkorb an. Achten Sie darauf, dass diese nicht verrutschen können. • Vergewissern Sie sich, dass sich die Sprüharme ungehindert bewegen können, bevor Sie ein Programm starten. 8.4 Vor dem Starten eines Programms Kontrollieren Sie folgende Punkte: 15 • Die Filter sind sauber und ordnungsgemäß eingesetzt. • Die Sprüharme sind nicht verstopft. • Die Geschirrteile sind richtig in den Körben angeordnet.
www.aeg.com 6. Bauen Sie den Filter (A) zusammen und setzen Sie ihn in Filter (B) ein. Drehen Sie ihn nach rechts, bis er einrastet. Eine falsche Anordnung der Filter führt zu schlechten Spülergebnissen und kann das Gerät beschädigen. 9.2 Reinigen der Sprüharme Bauen Sie die Sprüharme nicht aus. Falls die Löcher in den Sprüharmen verstopft sind, reinigen Sie sie mit einem dünnen spitzen Gegenstand. Verwenden Sie ausschließlich Neutralreiniger.
DEUTSCH Problem 17 Mögliche Abhilfe Vergewissern Sie sich, dass der Wasserdruck der Wasserversorgung nicht zu niedrig ist. Diese Information erhalten Sie von Ihrem Wasserversorger. Vergewissern Sie sich, dass der Wasserhahn nicht verstopft ist. Vergewissern Sie sich, dass der Filter im Zulaufschlauch nicht verstopft ist. Vergewissern Sie sich, dass der Zulaufschlauch nicht geknickt oder zu stark gekrümmt ist. Das Gerät pumpt das Wasser nicht ab.
www.aeg.com 2. Halten Sie Delay und Option gleichzeitig gedrückt, bis die Kontrolllam, und pen zu blinken beginnen. 3. Drücken Sie „Start“. • Die Kontrolllampen und erlöschen. • Die Kontrolllampe blinkt weiter. • Im Display wird die aktuelle Einstellung angezeigt. 4. Drücken Sie Start zur Änderung der Einstellung. 5. Drücken Sie die Taste „Ein/Aus“, um das Gerät auszuschalten und die Einstellung zu bestätigen. 6. Stellen Sie die Menge des Klarspülmittels ein. 7. Füllen Sie den Klarspülmittel-Dosierer.
DEUTSCH Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
117912430-A-402012 www.aeg.