FAVORIT 78002 VI0P EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMS . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Farm houses. – By clients in hotels, motels and other residential type environments. – Bed and breakfast type environments. WARNING! Risk of injury, burns, electrical shock or fire.
ENGLISH 5 2. PRODUCT DESCRIPTION 1 2 3 12 11 10 9 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Air vent and water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 8 7 6 5 4 2.1 Beam-on-Floor The Beam-on-Floor is a light that shows on the floor below the appliance door. • When the program starts to operate, the red light comes on and stays on for all the duration of the program.
www.aeg.com 3. CONTROL PANEL 2 1 3 4 5 6 7 8 9 1 On/off button 6 ExtraHygiene button 2 Display 3 Delay button 7 Multitab button 4 Program button (down) 9 Indicators 8 RESET button 5 Program button (up) Indicators Description Salt indicator. It is always off while the program operates. Rinse aid indicator. It is always off while the program operates. End indicator. It comes on when the program is completed.
ENGLISH 7 4.
www.aeg.com Consumption values Program1) Duration (min) Energy (kWh) Water (l) 1 90 - 160 0.9 - 1.7 8 - 15 2 140 - 160 1.5 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 11 4 30 0.9 9 5 147 - 161 0.79 - 0.96 10.4 - 12.6 6 50 - 60 1.0 - 1.2 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.05 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH 9 5. OPTIONS Activate or deactivate the options before the start of a program. You cannot activate or deactivate the options while a program operates. If one or more options are set, make sure that the related indicators are on before the program starts. 5.1 ExtraHygiene With this option you have better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10 minutes. How to activate the ExtraHygiene option 1. Press ExtraHygiene. The related indicator comes on.
www.aeg.com 6. BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a program to remove them. Do not use detergent and do not load the baskets. 6.
ENGLISH 2. Press and hold, at the same time, and and 3. until the indicators of start to flash. 11 • The display shows the current setting of the water softener, e.g. = level 5. , 4. Press again and again to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. Press . • The indicators of and go off. • continues to The indicator of flash. • The acoustic signals operate, e.g. five intermittent acoustic signals = level 5. 6.
www.aeg.com 7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a program”. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. • If you use the combi detergent tablets, activate the Multitab option. 5.
ENGLISH pliance continues from the point of interruption. Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the program and options again. 1. Press RESET. The display shows 2 horizontal status bars. Cancelling the program 1. Press RESET. The display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new program.
www.aeg.com • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down.
ENGLISH 2. 3. 4. 5. A1 A2 6. 7. 15 To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
www.aeg.com Problem Possible solution Make sure that there is not a damaged fuse in the fuse box. The program does not start. Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged.
ENGLISH 2. Press and hold, at the same time, and and until the indicators of start to flash. 17 Rinse aid dispenser off. , 3. Press . • The indicators of and go off. • The indicator of continues to flash. • The display shows the current setting. Rinse aid dispenser on. 4. Press to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11.
www.aeg.com 12. INSTALLATION There should be a minimum 2mm gap between the top of the dishwasher and underside of bench top The hose s hould not be extended by more than 2 metres or water pumpout problems ma y occu r Remove entire plastic membrane from sink trap spigot & fit drain hose to spigot with clamp Secure dishwasher with brackets and screws provided 600 mm max. 300 mm min. Gap on both sides should be equal, & no greater than 5 mm per side.
ENGLISH 19 Make sure that the local water authority gives you the average mains pressure in your area. In order to pass the safety valve through the kitchen cabinets, an opening of at least 45 mm x 90 mm is needed. Water drain hose The highest point of the drain hose must be no more than 600 mm from the floor and must have a continuous fall to the plumbing connection. The drain hose can be lengthened using additional lengths and connectors. These must be purchased from Electrolux Spare Parts.
www.aeg.com 13. WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALAND ALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
ENGLISH 6. 7. 8. 9. ance is transported at the owner’s cost and risk while in transit to and from AEG or its ASC. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
www.aeg.com Before calling for service, please ensure that the steps listed in point 13 above have been followed. SERVICE AUSTRALIA www.aeg.com/au FOR SERVICE or to find the address of your nearest state service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL customercare@aegaustralia.com.au For the cost of a local call (Australia only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in Australia PLEASE CALL 13 13 50 OR EMAIL customercare@aegaustralia.com.
ENGLISH 23
117909770-A-022013 www.aeg.
