FAVORIT 78400 IM0P NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation DE Benutzerinformation 2 18 33 50
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. VEILIGHEIDSVOORSCHRIFTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSVOORSCHRIFTEN Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen WAARSCHUWING! Gevaar voor verstikking, letsel of permanente invaliditeit.
www.aeg.com WAARSCHUWING! Gevaarlijke spanning. • Als de watertoevoerslang beschadigd is, haal dan onmiddellijk de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen. 1.
NEDERLANDS 2.
www.aeg.com 3. BEDIENINGSPANEEL 2 1 3 A B C 4 5 6 8 9 7 1 Aan/uit-toets 6 Delay-toets 2 Programmagids 7 Start-toets 3 Program-toets 8 Indicatielampjes 4 Programma-indicatielampjes 5 Display 9 Option-toets Indicatielampjes Omschrijving Multitab-indicatielampje. ÖKO PLUS-indicatielampje. Wasfase-indicatielampje. Spoelfase-indicatielampje. Droogfase-indicatielampje. Einde-indicatielampje. Glansmiddelindicatielampje. Dit indicatielampje is uit als het programma werkt.
NEDERLANDS 7 4.
www.aeg.com Verbruikswaarden Programma1) Bereidingsduur (min.) Energie (kWh) Water (l) 40 - 150 0.5 - 1.2 6 - 11 130 - 150 1.1 - 1.2 10 - 11 180 - 200 1.1 - 1.2 7-8 30 0.8 7 195 0.79 8.9 50 - 60 0.9 - 1.0 7-8 70 - 80 0.6 - 0.9 10 - 11 1) De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties en de hoeveelheid vaat kan de waarden veranderen. Aanwijzingen voor testinstituten Stuur voor alle benodigde informatie over testprestaties een e-mail naar: info.
NEDERLANDS 3. Start het kortste programma met een spoelfase, zonder afwasmiddel en zonder vaat. 9 4. Stel de waterontharder af op de waterhardheid in uw omgeving. 5. Stel de hoeveelheid glansmiddel in. 6. VOOR HET EERSTE GEBRUIK 1. Controleer of het ingestelde niveau van de waterontharder juist is voor de waterhardheid in uw omgeving. Als dat niet het geval is, stelt u de waterontharder in. Neem contact op met uw plaatselijke waterinstantie voor informatie over de hardheid van het water in uw omgeving.
www.aeg.com 5. Druk op de aan/uit-toets om het apparaat te deactiveren en om de instelling te bevestigen. 6.2 Het zoutreservoir vullen 1. 2. 3. 4. 5. Draai de dop linksom om het zoutreservoir te openen. Doe een liter water in het zoutreservoir (alleen de eerste keer). Vul het zoutreservoir met regenereerzout. Verwijder het zout rond de opening van het zoutreservoir. Draai de dop rechtsom om het zoutreservoir te sluiten. LET OP! Water en zout kunnen uit het zoutreservoir stromen als u het bijvult.
NEDERLANDS • Vul het glansmiddeldoseerbakje als het indicatielampje van het glansmiddel brandt. 3. Ruim de korven in. 4. Voeg vaatwasmiddel toe. • Activeer de Multitab-optie als u gecombineerde afwastabletten gebruikt. 11 5. U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. 7.1 Vaatwasmiddel gebruiken A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
www.aeg.com • De indicatielampjes van de fases die voor het programma worden voorspeld, gaan uit. 3. Druk op Start om het aftellen te starten. • Het aftellen vindt plaats in stappen van 1 uur. Als het aftelproces voltooid is, wordt het programma gestart. Het indicatielampje van de lopende fase gaat aan. De deur openen als het apparaat in werking is Als u de deur opent, stopt het apparaat. Als u de deur weer sluit, gaat het apparaat verder vanaf het punt van onderbreking.
NEDERLANDS ze tabletten geschikt zijn voor de waterhardheid in uw omgeving. Zie de instructies op de verpakking van de producten. • Vaatwastabletten worden bij korte programma's niet helemaal opgelost. Wij bevelen u aan de tabletten alleen bij lange programma's te gebruiken, om restjes afwasmiddel op uw serviesgoed te voorkomen. Gebruik niet meer dan de juiste hoeveelheid vaatwasmiddel. Zie de instructies van de vaatwasmiddelfabrikant. 8.
www.aeg.com 9.1 De filters reinigen 1. Draai het filter (A) linksom en verwijder het. 2. Haal om het filter (A) te demonteren, (A1) en (A2) uit elkaar. Verwijder het filter (B). Reinig de filters met water. Zorg ervoor dat als u het filter (B) terugplaatst, er geen etensresten of vuil in en rond de rand van de opvangbak zit. C A B A1 3. 4. 5. A2 6. 7. Zorg ervoor dat het filter (B) juist wordt geplaatst onder de 2 geleiders (C). Monteer het filter (A) en zet het terug in filter (B).
NEDERLANDS 15 10. PROBLEEMOPLOSSING Het apparaat start of stopt niet tijdens de werking. Raadpleeg voordat u contact opneemt met de klantenservice de informatie over het oplossen van problemen. Bij sommige problemen wordt er op de display een alarmcode weergegeven: • - Het apparaat wordt niet gevuld met water. • - Het apparaat pompt geen water weg. • - Het bescherminssysteem tegen waterlekkage is in werking getreden. WAARSCHUWING! Schakel het apparaat uit voordat u controles uitvoert.
www.aeg.com laar van het glansmiddel in op een lagere stand. • Er is te veel vaatwasmiddel gebruikt. Vlekken en droog water komen op glazen en serviesgoed terecht. • De vrijgegeven hoeveelheid glansmiddel is niet voldoende. Stel de keuzeschakelaar van het glansmiddel in op een hogere stand. • De kwaliteit van het vaatwasmiddel kan de oorzaak zijn. Het serviesgoed is nat. • Het afwasprogramma bevatte geen droogfase of een droogfase op lage temperatuur. • Het glansmiddeldoseerbakje is leeg.
NEDERLANDS Energieverbruik 17 Modus aan 0.10 W Modus uit 0.10 W 1) Sluit de slang aan op een kraan met 3/4”-schroefdraad. 2) Als het hete water door alternatieve, milieuvriendelijkere energiebronnen geproduceerd wordt (bijv. zonnepanelen en windenergie), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen. 12. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 19 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 2.
www.aeg.com 3. CONTROL PANEL 2 1 3 9 A B C 5 4 8 6 7 1 On/off button 6 Delay button 2 Programme guide 7 Start button 3 Program button 8 Indicators 4 Programme indicators 5 Display 9 Option button Indicators Description Multitab indicator. ÖKO PLUS indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator.
ENGLISH 23 4.
www.aeg.com Programme1) Duration (min.) Energy (kWh) Water (l) 180 - 200 1.1 - 1.2 7-8 30 0.8 7 195 0.79 8.9 50 - 60 0.9 - 1.0 7-8 70 - 80 0.6 - 0.9 10 - 11 1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.
ENGLISH 25 6. BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. 6.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 27 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when all the programme indicators come on and the display shows 2 horizontal status bars.
www.aeg.com indicators come on and the display shows 2 horizontal status bars. 2. Set the programme again. Cancelling the programme 1. Press and hold, at the same time, Delay and Start until all the programme indicators come on and the display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. At the end of the programme The display shows 0 and the end indicator comes on. 1. Press the on/off button to deactivate the appliance.
ENGLISH • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery basket. • Put the light items in the upper basket. Make sure that they do not move. • Make sure that the spray arms can move freely before you start a programme. 29 • The filters are clean and correctly installed. • The spray arms are not clogged.
www.aeg.com 6. 7. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms 9.4 Internal cleaning Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
ENGLISH Problem 31 Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. The appliance does not drain the water. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. The anti-flood device is on.
www.aeg.com 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate. Voltage 446 / 818 - 898 / 575 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) Water supply 1) Cold water or hot water2) (0.5 / 0.05 ) / (8 / 0.8 ) Capacity Place settings 9 Power consumption Left-on mode 0.10 W Off-mode 0.10 W max. 60 °C 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
FRANÇAIS 33 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2.
FRANÇAIS 37 3. BANDEAU DE COMMANDE 2 1 3 A 9 B C 5 4 8 6 7 1 Touche Marche/Arrêt 6 Touche Delay 2 Guide des programmes 7 Touche Start 3 Touche Program 8 Voyants 4 Voyants des programmes 5 Écran 9 Touche Option Voyants Description Voyant Multitab. Voyant ÖKO PLUS. Voyant de phase de lavage. Voyant de phase de rinçage. Voyant de phase de séchage. Voyant de fin. Voyant du réservoir de liquide de rinçage. Ce voyant est éteint pendant le déroulement du programme.
www.aeg.com 4.
FRANÇAIS 39 Valeurs de consommation Programme1) Durée (min) Consommation électrique (kWh) Eau (l) 40 - 150 0.5 - 1.2 6 - 11 130 - 150 1.1 - 1.2 10 - 11 180 - 200 1.1 - 1.2 7-8 30 0.8 7 195 0.79 8.9 50 - 60 0.9 - 1.0 7-8 70 - 80 0.6 - 0.9 10 - 11 1) Ces valeurs peuvent changer en fonction de la pression et de la température de l'eau, des variations d'alimentation électrique, des options et de la quantité de vaisselle.
www.aeg.com 2. Assurez-vous que le réservoir de sel régénérant et le distributeur de liquide de rinçage sont pleins. 3. Démarrez le programme le plus court par une phase de rinçage, sans produit de lavage ni vaisselle. 4. Réglez l'adoucisseur d'eau en fonction de la dureté de l'eau de votre région. 5. Ajustez la quantité de liquide de rinçage libérée. 6. AVANT LA PREMIÈRE UTILISATION 1. Assurez-vous que le niveau réglé pour l'adoucisseur d'eau correspond à la dureté de l'eau de votre région.
FRANÇAIS 2. Maintenez simultanément les touches Delay et Start enfoncées jusqu'à ce que les voyants (A), (B) et (C) clignotent. 3. Appuyez sur la touche Program. • Les voyants (B) et (C) s'éteignent. • Le voyant (A) continue à clignoter. • L'affichage indique le réglage actuel de l'adoucisseur d'eau, par = niveau 5. exemple 41 4. Appuyez sur la touche Program à plusieurs reprises pour modifier le réglage. 5. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil et confirmer le réglage. 6.
www.aeg.com 6.3 Remplissage du distributeur de liquide de rinçage 1. B A M AX 4 3 2 1 + - C D Appuyez sur le bouton d'ouverture (D) pour ouvrir le couvercle (C). 2. Remplissez le distributeur de liquide de rinçage (A), sans dépasser le repère « max ». 3. Si le liquide de rinçage déborde, épongez-le avec un chiffon absorbant pour éviter tout excès de mousse. 4. Fermez le couvercle. Assurez-vous que le bouton d'ouverture se verrouille correctement.
FRANÇAIS 43 7.1 Utilisation du produit de lavage A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Réglage et départ d'un programme Mode Programmation Certains réglages nécessitent que l'appareil soit en mode Programmation. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. L'appareil est en mode Programmation lorsque tous les voyants de programme s'allument et 2 barres d'état horizontales sont affichées.
www.aeg.com Ouverture de la porte au cours du fonctionnement de l'appareil Si vous ouvrez la porte, l'appareil s'arrête. Lorsque vous refermez la porte, l'appareil reprend là où il a été interrompu. Annulation du départ différé au cours du décompte En annulant le départ différé, vous annulez également le programme. 1. Maintenez enfoncées simultanément les touches Delay et Start jusqu'à ce que tous les voyants de programme s'allument et que 2 barres d'état horizontales s'affichent. 2.
FRANÇAIS adjuvants. Assurez-vous que ces pastilles sont adaptées à la dureté de l'eau de votre région. Reportez-vous aux instructions figurant sur l'emballage de ces produits. • Les tablettes de détergent ne se dissolvent pas complètement durant les programmes courts. Pour éviter que des résidus de produit de lavage ne se déposent sur la vaisselle, nous recommandons d'utiliser des pastilles de détergent avec des programmes longs. N'utilisez que la quantité nécessaire de produit de lavage.
www.aeg.com 9.1 Nettoyage des filtres 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante. Avant de remettre le filtre (B) en place, assurez-vous qu'il ne reste aucun résidu alimentaire ni salissure à l'intérieur ou autour du bord du collecteur d'eau. C A B A1 3. 4. 5. A2 6. 7. Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C).
FRANÇAIS Veuillez vous reporter aux informations suivantes avant de contacter le service après-vente pour résoudre un problème. Pour certaines anomalies, l'écran affiche un code d’alarme : • - L'appareil n'est pas approvisionné en eau. • • 47 - L'appareil ne se vidange pas. - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications. Problème Solution possible L'appareil ne s'allume pas.
www.aeg.com • La quantité de produit de lavage est excessive. Taches et traces de gouttes d'eau séchées sur les verres et la vaisselle • La quantité de liquide de rinçage libérée n'est pas suffisante. Placez le sélecteur de dosage du liquide de rinçage sur un niveau plus élevé. • Il se peut que la qualité du produit de lavage soit en cause. La vaisselle est mouillée • Le programme ne contient pas de phase de séchage ou une phase de séchage à basse température.
FRANÇAIS 49 max. 60 °C Arrivée d'eau 1) Eau froide ou eau chaude2) Capacité Couverts Consommation électrique Mode « Veille » 0.10 W Mode « Arrêt » 0.10 W 9 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce). 2) Si l'eau chaude est produite à partir de sources d'énergie respectueuses de l'environnement (par exemple, panneaux solaires ou énergie éolienne), utilisez une arrivée d'eau chaude afin de réduire la consommation d'énergie. 12.
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 51 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 2.
www.aeg.com 3. BEDIENFELD 2 1 3 A 9 B C 5 4 8 6 7 1 Taste Ein/Aus 6 Taste Delay 2 Programmübersicht 7 Taste Start 3 Taste Program 8 Kontrolllampen 4 Programm-Kontrolllampen 5 Display 9 Taste Option Kontrolllampen Beschreibung Kontrolllampe „Multitab“ Kontrolllampe „ÖKO PLUS“ Kontrolllampe „Hauptspülgang“. Kontrolllampe „Spülphase“. Kontrolllampe „Trocknen“. Kontrolllampe „Programmende“. Kontrolllampe „Klarspülmittel“. Diese Kontrolllampe erlischt während des Programmbetriebs.
DEUTSCH 55 4.
www.aeg.com Verbrauchswerte Programm 1) Dauer (Min.) Energieverbrauch (kWh) Wasser (l) 40 - 150 0.5 - 1.2 6 - 11 130 - 150 1.1 - 1.2 10 - 11 180 - 200 1.1 - 1.2 7-8 30 0.8 7 195 0.79 8.9 50 - 60 0.9 - 1.0 7-8 70 - 80 0.6 - 0.9 10 - 11 1) Die Verbrauchswerte können je nach Druck und Temperatur des Wassers, Schwankungen in der Stromversorgung, den Optionen und abhängig von der Geschirrmenge variieren.
DEUTSCH Klarspüler oder ein anderes Geschirrspülersalz verwenden: 1. Stellen Sie den Wasserenthärter auf die höchste Stufe ein. 2. Stellen Sie sicher, dass der Salzbehälter und der Klarspülmittel-Dosierer gefüllt sind. 3. Starten Sie das kürzeste Programm mit einem Spülgang ohne Reinigungsmittel und ohne Geschirr. 57 4. Stellen Sie den Wasserenthärter entsprechend der Wasserhärte in Ihrem Gebiet ein. 5. Stellen Sie die Menge des Klarspülmittels ein. 6. VOR DER ERSTEN INBETRIEBNAHME 1.
www.aeg.com 2) Verwenden Sie kein Salz bei diesen Werten. Einstellen der Wasserenthärterstufe 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet, siehe Abschnitt „Einstellen und Starten eines Programms“. 2. Halten Sie Delay und Start gleichzeitig gedrückt, bis die Kontrolllampen (A), (B) und (C) blinken. 3. Drücken Sie Program. • Die Kontrolllampen (B) und (C) erlöschen. • Die Kontrolllampe (A) blinkt weiterhin.
DEUTSCH 59 6.3 Füllen des Klarspülmittel-Dosierers 1. B A M AX 4 3 2 1 + - C D Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Klarspülmittel-Dosierer (A) nicht über die Marke „max“ hinaus. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Einstellen und Starten eines Programms Einstellmodus Für einige Einstellungen muss das Gerät im Einstellmodus sein. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Das Gerät befindet sich im Einstellmodus, wenn alle Programm-Kontrolllampen leuchten und im Display zwei horizontale Balken angezeigt werden.
DEUTSCH dem Zeitpunkt der Unterbrechung weiter. Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die Zeitvorwahl abbrechen, wird auch das Programm abgebrochen. 1. Halten Sie Delay und Start gleichzeitig gedrückt, bis alle Programmkontrolllampen leuchten und das Display zwei horizontale Linien anzeigt. 2. Stellen Sie erneut das Programm ein. Beenden des Programms 1.
www.aeg.com • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge. Siehe hierzu die Angaben auf der Reinigungsmittelverpackung. 8.3 Beladen der Körbe Beispiele für die Beladung der Körbe finden Sie in der mitgelieferten Broschüre.
DEUTSCH 63 9.1 Reinigen der Filter 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
www.aeg.com 10. FEHLERSUCHE Das Gerät startet nicht oder bleibt während des Betriebs stehen. Prüfen Sie, ob Sie die Störung mit den folgenden Hinweisen selbst beheben können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen.
DEUTSCH Werden andere Alarmcodes im Display angezeigt, wenden Sie sich an den Kundendienst. 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. Wasserflecken und andere Flecken auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu niedrig.
www.aeg.com Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W 9 Ausgeschaltet 0.10 W 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B. Solaranlagen oder Windkraft) aufbereiten, können Sie durch den Anschluss des Geräts an die Heißwasserversorgung Energie sparen. 12. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol .
DEUTSCH 67
117924881-A-382013 www.aeg.