FAVORIT 88009 W0P/AU FAVORIT 88009 M0P/AU EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMS . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • • • 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Farm houses. – By clients in hotels, motels and other residential type environments. – Bed and breakfast type environments. WARNING! Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance.
ENGLISH 2.
www.aeg.com 3. CONTROL PANEL 1 2 8 4 3 7 5 6 1 On/off button 5 Delay touchpad 2 Program touchpad 3 Program indicators 6 Start touchpad 4 Display 8 Option touchpad Indicators 7 Indicators Description Multitab indicator. ÖKO PLUS indicator. ExtraHygiene indicator. Washing phase indicator. It comes on when the washing phase operates. Rinsing phase indicator. It comes on when the rinsing phases operate. Drying phase indicator. It comes on when the drying phase operates. End indicator.
ENGLISH 7 4.
www.aeg.com Consumption values Program1) Duration (min) Energy (kWh) Water (l) 90 - 160 0.9 - 1.7 8 - 15 140 - 160 1.5 - 1.6 13 - 14 200 - 220 1.1 - 1.2 9 - 11 30 0.9 9 147 - 161 0.79 - 0.96 10.4 - 12.6 50 - 60 1.0 - 1.2 10 - 11 130 - 140 1.4 - 1.5 14 - 15 70 - 80 0.8 - 0.9 11 - 12 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH 9 5. OPTIONS Activate or deactivate the options before the start of a program. You cannot activate or deactivate the options while a program operates. If one or more options are set, make sure that the related indicators are on before the program starts. 5.1 ExtraHygiene With this option you have better hygiene results. During the rinsing phase, the temperature stays at 70 °C for at least 10 minutes. How to activate the ExtraHygiene option 1.
www.aeg.com 6.1 Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
ENGLISH 11 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a program.
www.aeg.com 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 4. C 7.2 Setting and starting a program Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when all the program indicators come on and the display shows 2 horizontal status bars.
ENGLISH dicators come on and the display shows 2 horizontal status bars. 2. Set the program again. Cancelling the program 1. Press and hold, at the same time, Delay and Start until all the program indicators come on and the display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new program. 13 Important • For better drying results, keep the door ajar for some minutes before you remove the dishes.
www.aeg.com 8.3 Loading the baskets Refer to the supplied leaflet with examples of the load of the baskets. • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance.
ENGLISH 2. 3. 4. 5. A1 A2 6. 7. 15 To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
www.aeg.com Problem Possible solution Make sure that there is not a damaged fuse in the fuse box. The program does not start. Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
ENGLISH pliance is in setting mode, refer to “Setting and starting a program”. 2. Press and hold, at the same time, Delay and Start until the indicators of , and start to flash. 3. Press Option . • The indicators of and go off. • The indicator continues to flash. • The display shows the current setting. 17 Rinse aid dispenser off Rinse aid dispenser on 4. Press Option to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6.
www.aeg.com 12. INSTALLATION 12.1 Fitting under a kitchen counter The plinth of a freestanding appliance is not adjustable. Do not remove the appliance worktop if you want to use it as a freestanding unit. It is not necessary to remove the worktop when installing under a standard kitchen counter. Only remove the appliance worktop to install it under a close fitting sink unit or kitchen counter (820 mm). Put the appliance adjacent to a water tap and a water drain. 2.
ENGLISH • If water pressure is in excess of 800 kPa, a pressure reducing valve should be used. Check for leaks. • If water temperature is in excess of 60 °C, a tempering valve should be used. Check for leaks. CAUTION! Always use new hoses when you connect the appliance to the water mains. Old hoses must not be used. The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary. The water pressure must be in the limits, refer to “TECHNICAL INFORMATION”.
www.aeg.com 13. WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALAND ALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
ENGLISH 6. 7. 8. 9. ance is transported at the owner’s cost and risk while in transit to and from AEG or its ASC. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship.
www.aeg.com Before calling for service, please ensure that the steps listed in point 13 above have been followed. SERVICE AUSTRALIA www.aeg.com/au FOR SERVICE or to find the address of your nearest state service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL customercare@aegaustralia.com.au For the cost of a local call (Australia only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in Australia PLEASE CALL 13 13 50 OR EMAIL customercare@aegaustralia.com.
ENGLISH 23
117909751-A-052013 www.aeg.
