FAVORIT 88009 EN DISHWASHER USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Contents 3 CONTENTS 4 6 7 10 10 12 12 14 14 15 16 19 20 23 24 25 27 27 29 Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function Loading cutlery and dishes Washing programs Setting and starting a washing program Care and cleaning What to do if… Technical data Installation Water connection Electrical connection Environment concerns Warranty The following symbols are used in this user manu
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct use • Only use the appliance to clean household utensils that are suitable for dishwashers. • Do not put solvents in the appliance. Risk of explosion.
Safety information 5 Child safety • Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation by a person who is responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Keep all the packaging away from children. There is a risk of suffocation. • Keep all detergents in a safe area.
Product description PRODUCT DESCRIPTION 11 10 1 9 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 Upper basket Air vent and water hardness dial Salt container Detergent dispenser Rinse aid dispenser Rating plate Filters Lower spray arm Upper spray arm Top spray arm Worktop 8 7 6
Control panel CONTROL PANEL 2 1 1 2 3 4 5 6 7 8 9 3 4 9 8 5 6 7 On/off button Program guide Program touchpad Program indicators Display Delay touchpad Start touchpad Indicators Option touchpad Indicators Multitab It comes on when you activate the multitab function. Refer to 'Multitab function'. ÖKO PLUS It comes on when you activate the ÖKO PLUS function. Extra-Hygiene It comes on when you activate the Extra-Hygiene function. Wash It comes on when the washing phase operates.
Control panel Indicators Rinse aid It comes on when it is necessary to fill the rinse aid dispenser. Refer to 'Use of rinse aid'. 1) The rinse aid indicator does not come on while a washing program operates even If the rinse aid dispenser is empty Salt It comes on when it is necessary to fill the salt container.1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance.
Control panel 9 Option touchpad Press this touchpad, once or more times, to set the required functions. When a function is activated, the related indicator comes on.
Use of the appliance • The display shows two horizontal status bars. Switch on the appliance. The appliance is not in setting mode when: • Only one program indicator comes on. • The display shows the time of a washing program or a delay start. – To go back to the setting mode, it is necessary to cancel the program or the delay start . Refer to 'Setting and starting a washing program'. USE OF THE APPLIANCE Refer to the specific instructions for each step of the procedure. 1.
Setting the water softener Water hardness 11 Water hardness setting mg/l ppm mmol/l manually electronically 260 - 329 260 - 329 2.6 - 3.2 1 4 190 - 259 190 - 259 1.9 - 2.5 1 3 70 - 189 70 - 189 0.7 - 1.8 1 2 < 70 < 70 < 0.7 1 11) 1) No use of salt required. You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1. Remove the lower basket. 2.
Use of dishwasher salt USE OF DISHWASHER SALT CAUTION! Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener. CAUTION! Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing program. Filling the salt container 1. Turn the cap counterclockwise to open the salt container. 2. Fill the salt container with 1 litre of water (only the first operation). 3.
Use of detergent and rinse aid 13 Use of detergent CAUTION! Only use detergents (powder, liquid or tablet) that are suitable for dishwashers. Follow the recommendations on the detergent packaging for the use and storage of the detergent. To help the environment, do not use more than the correct quantity of detergent. Filling with detergent 1. Press the release button 2 to open the lid 7 of the detergent dispenser. 2. Put the detergent in the dispenser 1 . 3.
Multitab function MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tablets can contain other agents. Be sure that these tablets are suitable for the water hardness in your area (refer to the instructions on the packaging of the products). The multitab function deactivates the flow of rinse aid and salt. The multitab function deactivates the indicators of salt and rinse aid.
Washing programs 15 – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base. – Make sure that cutlery and dishes do not lie inside one another. – Make sure that cutlery and dishes do not cover other cutlery and dishes. – Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket. • Plastic items and pans with non-stick coatings can retain water droplets.
Setting and starting a washing program Program Type of soil Normal or light soil Type of load Program description Delicate crockery and glassware Wash 45 °C Rinses Dry Functions ÖKO PLUS 1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the program time. 2) This is the most silent washing program. The pump works at a very low speed to decrease the level of noise.
Setting and starting a washing program 17 • Only the indicator of the phase in operation stays on. The other phase indicators go off. Starting the washing program with delay start 1. Close the appliance door. 2. Switch on the appliance. Make sure that the appliance is in setting mode. 3. Set the washing program and if required, the available functions. (Always set the ÖKO PLUS function and the Extra-Hygiene function after the setting of the washing program). 4.
Setting and starting a washing program – The display shows two horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new washing program. End of the washing program When the washing program is completed, the display shows a zero and the end indicator is on 1. Switch off the appliance. 2. Open the appliance door. For better drying results, keep the appliance door ajar for some minutes.
Care and cleaning 19 CARE AND CLEANING To remove and clean the filters WARNING! Switch the appliance off before you carry out any cleaning operation. Dirty filters decrease the washing results. Although the maintenance is very low with these filters, we recommend that you regularly check the filters and clean them if necessary. 1. To remove filter (A), turn it counterclockwise and remove it out from filter (B). B A 2. Filter (A) has 2 parts. To disassemble the filter, pull them apart. 3.
What to do if… Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (e.g. acetone). Internal cleaning We recommend, every 3 months to run a washing program for heavily soiled dishes.
What to do if… Malfunction The appliance does not fill with water Possible cause 21 Possible solution The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter. The installation of the water inlet hose is not correct. The hose is bent or squashed. Make sure that the installation is correct. The water tap is blocked or restricted Clean the water tap. with limescale. The appliance does not drain the water The water pressure is too low.
What to do if… Problem Possible cause Possible solution The baskets were not loaded correctly, water did not touch all surfaces. Load the baskets correctly. The spray arms could not turn freely because of incorrect arrangement of the load. Make sure that an incorrect arrangement of the load does not cause a blockage of the spray arms. The filters are dirty or not asMake sure that the filters are sembled and installed correctly. clean and correctly assembled and installed.
Technical data 23 • The display shows the setting of the rinse aid dispenser. Rinse aid dispenser deactivated Rinse aid dispenser activated 5. Press touchpad Option to change the setting. The display shows the new adjustment. 6. Switch off the appliance to confirm. TECHNICAL DATA Dimensions Width Height Depth Electrical connection Voltage Overall power Fuse Frequency Water supply pressure min. max.
Installation INSTALLATION Fitting under a kitchen counter WARNING! Make sure that the mains plug is disconnected from the mains socket during installation. Put the appliance adjacent to a water tap and to a water drain. The plinth of a freestanding appliance is not adjustable. Do not remove the worktop of the appliance if you want to use it as a freestanding unit. Remove the worktop of the appliance to install it under a kitchen counter (820 mm).
Water connection 3. 4. 5. 25 Lift the worktop and move it from the front slots (3). Level the appliance using the adjustable feet. Install the appliance under the kitchen counter. Be careful not to bend or squash the water hoses and the mains cable. WATER CONNECTION Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”. For best washing performance it is recommended to connect the appliance to a cold water supply.
Water connection WARNING! • The mains cable is in the double-walled inlet hose. Do not immerse the water inlet hose or the safety valve in water. • Do not attempt to shorten the inlet hose. • If the water inlet hose or the safety valve is damaged, immediately turn off the power and remove the mains plug from the mains socket. • Only a qualified Service Engineer can replace the water inlet hose with safety valve.
Electrical connection 27 CAUTION! Make sure that the water couplings are tight to prevent water leakage. Ensure that hoses are not bent or squashed under or behind the appliance. Once connected the inlet hose to the water tap, turn the tap on and check that there are no leaks. ELECTRICAL CONNECTION WARNING! • The manufacturer accepts no liability for failure to observe the below safety precautions. • Safety standards require the appliance to be earthed.
Environment concerns please contact your local council, your household waste disposal service or the shop where you purchased the product. The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the applicable container at the community waste disposal facilities. WARNING! Follow these instructions to discard the appliance: • Pull the mains plug out of the socket.
Warranty 29 WARRANTY FOR SALES IN AUSTRALIA AND NEW ZEALAND ALL AEG BRANDED APPLIANCES This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
Warranty 5. You will bear the cost of transportation, travel and delivery of the Appliance to and from AEG or its ASC.
12. For Appliances and services provided by AEG in New Zealand, the Appliances come with a guarantee by AEG pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act. 13.
www.aeg.