FAVORIT 88072 EN DISHWASHER USER MANUAL
www.aeg.com CONTENTS 4 6 7 8 10 11 13 15 16 17 19 20 SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL PROGRAMMES OPTIONS BEFORE FIRST USE DAILY USE HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances.
ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
www.aeg.com SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH USE • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position.
www.aeg.
ENGLISH CONTROL PANEL 1 2 A B C 3 8 4 5 6 7 1 On/off button 5 Delay touchpad 2 Program touchpad 6 Start touchpad 3 Programme indicators 4 Display 7 Indicators Indicators 8 Option touchpad Description Multitab indicator. ÖKO PLUS indicator. ExtraHygiene indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme operates.
www.aeg.
ENGLISH Consumption values Programme1) Duration (min) Energy (kWh) Water (l) 40 - 150 0.6 - 1.4 7 - 14 150 - 160 1.4 - 1.6 13 - 15 200 - 220 1.1 - 1.2 9 - 11 30 0.8 9 170 - 180 0.9 - 1.0 9 - 10 130 - 140 1.3 - 1.5 14 - 15 70 - 80 0.8 - 0.9 11 - 12 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values.
www.aeg.com OPTIONS Activate or deactivate the options before the start of a programme. You cannot activate or deactivate the options while a programme operates. If one or more options are set, make sure that the related indicators are on before the programme starts. MULTITAB Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase.
ENGLISH 11 BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets.
www.aeg.com Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash. 4. Press Program. • The indicators (B) and (C) go off. • The indicator (A) continues to flash. • The display shows the setting of the = levwater softener. Example: el 5. 5. Press Program again and again to change the setting.
ENGLISH 13 DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. USING THE DETERGENT A 1. B 2. 30 3.
www.aeg.com • The display shows the countdown of the delay start that decreases with steps of 1 hour. • The phase indicators of the set programme go off. • When the countdown is completed, the programme starts. – The indicator of the phase in operation comes on. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption.
ENGLISH 15 HINTS AND TIPS THE WATER SOFTENER Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. It is important to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of dishwasher salt and water.
www.aeg.com CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS 1. A1 Turn the filter (A) counterclockwise and remove it. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position.
ENGLISH 17 TROUBLESHOOTING The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. With some problems, the display shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. WARNING! Deactivate the appliance before you do the checks. Problem Possible cause Possible solution The programme does not start.
www.aeg.com • The quantity of detergent is too much. Stains and dry water drops on glasses and dishes • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. • The quality of the detergent can be the cause. Dishes are wet • The programme is without a drying phase or with a low temperature drying phase. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • The quality of the combi detergent tablets can be the cause.
ENGLISH 19 INSTALLATION WARNING! Refer to “SAFETY INFORMATION”. INSTALLATION UNDER A KITCHEN COUNTER 1. Make sure that the dimensions of the recess agree with the dimensions in the figure. 2. Put the appliance adjacent to a water tap and a water drain. 570-600 mm 820 mm 600 mm 3. 4. 1 5. 2 3 4 Remove the worktop of the appliance. Loosen or tighten the adjustable feet for a correct level of the appliance. With a correct level the appliance door closes and seals correctly.
www.aeg.com WATER DRAIN CONNECTION max. 850 mm max. 4000 mm min. 400 mm Connect the water drain hose to: • The sink spigot. Attach the water drain hose under the kitchen counter. This prevents that waste water from the sink goes back to the appliance. • A stand pipe with vent-hole. The internal diameter must be minimum 40 mm. Remove the sink plug when the appliance drains. This prevents water to go back to the appliance.
ENGLISH 21
www.aeg.
ENGLISH 23
www.aeg.