FAVORIT 88075 VI1P NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation DE Benutzerinformation 2 20 37 56
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. VEILIGHEIDSVOORSCHRIFTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSVOORSCHRIFTEN Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen WAARSCHUWING! Gevaar voor verstikking, letsel of permanente invaliditeit.
www.aeg.com • • • • WAARSCHUWING! Gevaarlijke spanning. • Als de watertoevoerslang beschadigd is, haal dan onmiddellijk de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen. • • 1.
NEDERLANDS 5 2. BESCHRIJVING VAN HET PRODUCT 1 2 3 12 11 10 1 Top sproeiarm 9 8 7 6 5 4 2 Bovenste sproeiarm 9 Wasmiddeldoseerlade 10 Bestekmand 3 Onderste sproeiarm 11 Onderrek 4 Filters 5 Typeplaatje 12 Bovenrek 6 Zoutreservoir 7 Waterhardheidsknop 8 Glansmiddeldoseerbakje Dit apparaat is voorzien van een binnenverlichting die aan- en uitgaat met het openen en sluiten van de deur. 2.1 TimeBeam De TimeBeam is een weergave die op de vloer onder de deur van het apparaat te zien is.
www.aeg.com 3. BEDIENINGSPANEEL 1 2 3 4 5 6 7 8 9 1 Aan/uit-toets 6 TimeSaver -tiptoets 2 Display 7 Multitab -tiptoets 3 Delay -tiptoets 4 Program -tiptoets 8 AutoOpen -tiptoets 9 Indicatielampjes 5 ExtraHygiene -tiptoets Indicatielampjes Beschrijving Zoutindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is. Glansmiddelindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is. Einde-indicatielampje. 4.
NEDERLANDS Programma Mate van vervuiling Type lading Programma fasen Opties 5 Normaal bevuild Serviesgoed en bestek Voorspoelen Afwassen 50 °C Spoelgangen Drogen ExtraHygiene6) TimeSaver7) AutoOpen 5) 6 Gecombineerd vuil Voorspoelen Serviesgoed, beAfwassen 70 °C stek en pannen Spoelgangen Drogen 8) 7 Normaal of licht bevuild Teer serviesgoed en glaswerk Afwassen 45 °C Spoelgangen Drogen 8 Alles Voorspoelen 7 TimeSaver 9) 1) Het apparaat detecteert de mate van vervuiling en de hoeveelhei
www.aeg.com Programma1) Bereidingsduur (min) Energie(kWh) Water (l) 2 150 - 160 1.4 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 10 4 30 0.8 9 5 195 0.82 10.2 6 130 - 140 1.2 - 1.3 14 - 15 7 70 - 80 0.7 - 0.9 11 - 12 8 14 0.1 4 1) De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties en de hoeveelheid vaat kunnen de programmaduur en de verbruikswaarden veranderen.
NEDERLANDS het bijbehorende lampje kort drie keer en dan gaat het uit. 5.2 TimeSaver Met deze optie verhoogt u de druk en de temperatuur van het water. De wasen droogfasen zijn korter. De totale duur van het programma neemt met ongeveer 50% af. De wasresultaten zijn hetzelfde als bij de normale programmaduur. De droogresultaten nemen mogelijk iets af. De optie TimeSaver activeren 1. Druk op TimeSaver. Het bijbehorende indicatielampje gaat branden. In het display kunt u de update van de programmaduur zien.
www.aeg.com 5.5 Geluidssignalen Het geluidssignaal weerklinkt wanneer er een storing in het apparaat optreedt of wanneer het niveau van de waterontharder wordt aangepast en als het programma voltooid is. Dit geluidssignaal is standaard ingeschakeld, maar kan worden uitgeschakeld. Hoe schakelt u geluidssignalen uit 1. Druk op de aan/uit-toets om het apparaat te activeren. Zorg dat het apparaat in de instelmodus staat. 2.
NEDERLANDS 11 6.1 De waterontharder instellen Waterontharder afstelling Waterhardheid Duitse graden (°dH) Franse graden (°fH) mmol/l Clarkegraden Handmatig Elektronisch 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.
www.aeg.com 5. Druk op de aan/uit-toets om het apparaat te deactiveren en om de instelling te bevestigen. 6.2 Het zoutreservoir vullen 1. 2. 3. 4. 5. Draai de dop linksom om het zoutreservoir te openen. Doe een liter water in het zoutreservoir (alleen de eerste keer). Vul het zoutreservoir met regenereerzout. Verwijder het zout rond de opening van het zoutreservoir. Draai de dop rechtsom om het zoutreservoir te sluiten. LET OP! Water en zout kunnen uit het zoutreservoir stromen als u het bijvult.
NEDERLANDS • Vul het glansmiddeldoseerbakje als het indicatielampje van het glansmiddel brandt. 3. Laad de korven in. 4. Voeg het afwasmiddel toe. • Activeer de Multitab-optie als u gecombineerde afwastabletten gebruikt. 13 5. U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. 7.1 Vaatwasmiddel gebruiken A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
www.aeg.com raat verder vanaf het punt van onderbreking. De uitgestelde start annuleren tijdens het aftellen Als de startuitstel wordt geannuleerd, wordt ook het programma geannuleerd. 1. Houd tegelijkertijd Program en ExtraHygiene ingedrukt totdat er 2 horizontale statusstreepjes op het display worden weergegeven. 2. Stel het programma opnieuw in. Het programma annuleren 1. Houd tegelijkertijd Program en ExtraHygiene ingedrukt totdat er 2 horizontale statusstreepjes op het display worden weergegeven.
NEDERLANDS Gebruik niet meer dan de juiste hoeveelheid vaatwasmiddel. Zie de instructies van de vaatwasmiddelfabrikant. 8.3 De korven inruimen Zie de meegeleverde folder voor voorbeelden van het inruimen van de korven. • Gebruik het apparaat alleen om voorwerpen af te wassen die vaatwasbestendig zijn. • Doe geen voorwerpen in het apparaat die gemaakt zijn van hout, hoorn, aluminium, tin en koper. • Plaats geen voorwerpen in het apparaat die water kunnen absorberen (sponzen, keukenhanddoeken).
www.aeg.com 9.1 De filters reinigen C 1. Draai het filter (A) linksom en verwijder het. 2. Haal om het filter (A) te demonteren, (A1) en (A2) uit elkaar. Verwijder het filter (B). Reinig de filters met water. Zorg er voordat u het filter (B) terugplaatst voor dat er geen etensresten of vuil in en rond de rand van de opvangbak zit. C A B A1 3. 4. 5. A2 6. 7. Zorg ervoor dat het filter (B) juist wordt geplaatst onder de 2 geleiders (C). Monteer het filter (A) en zet het terug in filter (B).
NEDERLANDS • - Het apparaat pompt geen water weg. • - Het bescherminssysteem tegen waterlekkage is in werking getreden. 17 WAARSCHUWING! Schakel het apparaat uit voordat u controles uitvoert. Storing Mogelijke oplossing U kunt het apparaat niet inschakelen. Zorg dat de stekker in het stopcontact is gestoken. Zorg ervoor dat er geen beschadigde zekering in de zekeringkast is. Het programma start niet. Zorg ervoor dat de deur van het apparaat dicht is.
www.aeg.com • De kwaliteit van het glansmiddel kan de oorzaak zijn. • De kwaliteit van de gecombineerde vaatwastabletten kan de oorzaak zijn. Probeer een ander merk of activeer het glansmiddeldoseerbakje en gebruik het glansmiddel samen met de gecombineerde afwastabletten. Zie 'AANWIJZINGEN EN TIPS' voor andere mogelijke oorzaken. traHygiene en TimeSaver beginnen te knipperen. 3. Druk op Program. • De indicatielampjes van Delay, ExtraHygiene en Timesaver gaan uit.
NEDERLANDS 12. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen. Help om het milieu en de volksgezondheid te beschermen en recycle het afval van elektrische en elektronische apparaten. Gooi apparaten gemarkeerd met het symbool niet weg met het huishoudelijk afval. Breng het product naar het milieustation bij u in de buurt of neem contact op met de gemeente.
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 21 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 23 2. PRODUCT DESCRIPTION 1 2 3 12 11 10 1 Top spray arm 9 8 7 6 5 4 2 Upper spray arm 9 Detergent dispenser 10 Cutlery basket 3 Lower spray arm 11 Lower basket 4 Filters 5 Rating plate 12 Upper basket 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser This appliance has an internal light that comes on when you open the door and goes off when the door is closed. 2.1 TimeBeam The TimeBeam is a display that shows on the floor below the appliance door.
www.aeg.com 3. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 6 TimeSaver touchpad 2 Display 7 Multitab touchpad 3 Delay touchpad 4 Program touchpad 8 AutoOpen touchpad 9 Indicators 5 ExtraHygiene touchpad Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. End indicator. 4.
ENGLISH Programme Degree of soil Type of load Programme phases Options 6 Mixed soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry TimeSaver 8) 7 Normal or light soil Wash 45 °C Delicate crockery Rinses and glassware Dry 8 All 25 Prewash 9) 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration.
www.aeg.com Programme1) Duration (min) Energy (kWh) Water (l) 4 30 0.8 9 5 195 0.82 10.2 6 130 - 140 1.2 - 1.3 14 - 15 7 70 - 80 0.7 - 0.9 11 - 12 8 14 0.1 4 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.
ENGLISH How to activate the TimeSaver option 1. Press TimeSaver. The related indicator comes on. In the display you can see the update of the programme duration. • If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. 5.3 Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the use of rinse aid and salt. The related indicators stay off. The programme duration can increase.
www.aeg.com • The indicators of Delay, Program and TimeSaver go off. • The indicator of ExtraHygiene continues to flash. • The display shows the current setting. Acoustic signal on. Acoustic signal off. 4. Press ExtraHygiene to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 5.6 How to set the colour of the TimeBeam It is possible to change the colour of the TimeBeam to match the colour of the kitchen floor.
ENGLISH 29 Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically.
www.aeg.com 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion.
ENGLISH 31 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use detergent tablets, put the tablet in the compartment (A). Close the lid.
www.aeg.com Cancelling the programme 1. Press and hold, at the same time, Program and ExtraHygiene until the display shows 2 horizontal status bars. Make sure that there is detergent in the detergent dispenser before you start a new programme. At the end of the programme Important • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket.
ENGLISH • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery basket.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
ENGLISH 35 Problem Possible solution The programme does not start. Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged.
www.aeg.com • The display shows the current setting. Rinse aid dispenser off. Rinse aid dispenser on. 4. Press Program to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate.
FRANÇAIS 37 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2.
FRANÇAIS 3. BANDEAU DE COMMANDE 1 2 3 4 5 6 7 8 9 1 Touche Marche/Arrêt 6 Touche TimeSaver 2 Affichage 7 Touche Multitab 3 Touche Delay 4 Touche Program 8 Touche AutoOpen 9 Voyants 5 Touche ExtraHygiene Voyants Description Voyant du réservoir de sel régénérant. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant du réservoir de liquide de rinçage. Ce voyant est toujours éteint pendant le déroulement du programme. Voyant de fin. 4.
www.aeg.
FRANÇAIS 43 Valeurs de consommation Programme1) Durée (min) Consommation électrique (kWh) Eau (l) 1 40 - 150 0.6 - 1.4 7 - 14 2 150 - 160 1.4 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 10 4 30 0.8 9 5 195 0.82 10.2 6 130 - 140 1.2 - 1.3 14 - 15 7 70 - 80 0.7 - 0.9 11 - 12 8 14 0.
www.aeg.com 5.1 ExtraHygiene Cette option fournit des résultats plus hygiéniques. Au cours de la phase de rinçage, la température reste à 70 °C pendant au moins 10 minutes. Comment activer l'option ExtraHygiene 1. Appuyez sur la touche ExtraHygiene. Le voyant correspondant s'allume. La durée réactualisée du programme s'affiche. • Si cette option n'est pas compatible avec le programme, le voyant correspondant clignote rapidement 3 fois puis s'éteint. 5.
FRANÇAIS 45 • Durant la phase de séchage, un dispositif entrouvre la porte de l'appareil. • À la fin du programme, le dispositif se rétracte et la porte de l'appareil se referme. L'appareil s'éteint automatiquement. ATTENTION N'essayez pas de fermer la porte de l'appareil lorsque le dispositif la maintient entrouverte. Vous risqueriez d'endommager l'appareil. Si vous souhaitez désactiver l'option AutoOpen, appuyez sur AutoOpen. Le voyant correspondant s'éteint.
www.aeg.com couleurs. Les différentes couleurs apparaissent sur le sol. 5. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil et confirmer le réglage. 6. AVANT LA PREMIÈRE UTILISATION 1. Assurez-vous que le niveau réglé pour l'adoucisseur d'eau correspond à la dureté de l'eau de votre région. Dans le cas contraire, réglez le niveau de l'adoucisseur d'eau. Contactez votre compagnie des eaux pour connaître la dureté de l'eau de votre région. 2. Remplissez le réservoir de sel régénérant. 3.
FRANÇAIS 47 Réglage manuel Tournez le sélecteur de dureté de l'eau sur la position 1 ou 2. Réglage électronique 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation. 2. Appuyez simultanément sur les touches Program et ExtraHygiene jusqu'à ce que les voyants Delay, Program, ExtraHygiene et TimeSaver se mettent à clignoter. 3. Appuyez sur la touche Delay. • Les voyants Program, ExtraHygiene et TimeSaver s'éteignent.
www.aeg.com 6.3 Remplissage du distributeur de liquide de rinçage 1. B A M AX 4 3 2 1 + - C D Appuyez sur le bouton d'ouverture (D) pour ouvrir le couvercle (C). 2. Remplissez le distributeur de liquide de rinçage (A), sans dépasser le repère « max ». 3. Si le liquide de rinçage déborde, épongez-le avec un chiffon absorbant pour éviter tout excès de mousse. 4. Fermez le couvercle. Assurez-vous que le bouton d'ouverture se verrouille correctement.
FRANÇAIS 49 7.1 Utilisation du produit de lavage A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Réglage et départ d'un programme Mode Programmation Certains réglages nécessitent que l'appareil soit en mode Programmation. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. L'appareil est en mode Programmation lorsque 2 barres d'état horizontales sont affichées.
www.aeg.com Annulation du programme 1. Maintenez enfoncées simultanément les touches Program et ExtraHygiene jusqu'à ce que 2 barres d'état horizontales s'affichent. Assurez-vous que le distributeur de produit de lavage n'est pas vide avant de démarrer un nouveau programme de lavage. À la fin du programme Important • Attendez que la vaisselle refroidisse avant de la retirer du lave-vaisselle. La vaisselle encore chaude est sensible aux chocs.
FRANÇAIS 8.3 Chargement des paniers Reportez-vous à la brochure fournie pour consulter des exemples de charge des paniers. • Utilisez uniquement cet appareil pour laver des articles qui peuvent passer au lave-vaisselle. • Ne mettez pas dans le lave-vaisselle des articles en bois, en corne, en aluminium, en étain et en cuivre. • Ne placez pas dans l'appareil des objets pouvant absorber l'eau (éponges, chiffons de nettoyage). • Enlevez les restes d'aliments sur les articles.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante. Avant de remettre le filtre (B) en place, assurez-vous qu'il ne reste aucun résidu alimentaire ni salissure à l'intérieur ou autour du bord du collecteur d'eau. Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C). Assemblez le filtre (A) et remettez-le en place dans le filtre (B). Tournez-le vers la droite jusqu'à la butée.
FRANÇAIS Problème 53 Solution possible Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte. L'appareil ne se remplit pas d'eau. Assurez-vous que le robinet d'eau est ouvert. Assurez-vous que la pression de l'arrivée d'eau n'est pas trop basse. Pour obtenir cette information, contactez votre compagnie des eaux. Assurez-vous que le robinet d'eau n'est pas obstrué. Assurez-vous que le filtre du tuyau d'arrivée d'eau n'est pas obstrué.
www.aeg.com 10.2 Comment activer le distributeur de liquide de rinçage Le distributeur de liquide de rinçage ne peut être activé que lorsque l'option Multitab est activée. 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation. 2. Appuyez simultanément sur les touches Program et ExtraHygiene jusqu'à ce que les voyants Delay, Program, ExtraHygiene et TimeSaver se mettent à clignoter. 3. Appuyez sur la touche Program.
FRANÇAIS Contribuez à la protection de l'environnement et à votre sécurité, recyclez vos produits électriques et électroniques. Ne jetez pas les appareils portant le symbole avec les ordures ménagères. Emmenez un tel produit dans votre centre local de recyclage ou contactez vos services municipaux.
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 57 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
www.aeg.com Ummantelung mit einem innenliegenden Netzkabel. WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH 59 2. GERÄTEBESCHREIBUNG 1 2 3 12 11 10 1 Oberer Sprüharm 9 8 7 6 5 4 2 Mittlerer Sprüharm 9 Waschmittelschublade 10 Besteckkorb 3 Unterer Sprüharm 11 Unterkorb 4 Filter 5 Typenschild 12 Oberkorb 6 Salzbehälter 7 Wasserhärtestufen-Wähler 8 Klarspülmittel-Dosierer Die Innenbeleuchtung des Geschirrspülers wird automatisch beim Öffnen der Tür eingeschaltet und beim Schließen der Tür ausgeschaltet. 2.
www.aeg.com 3. BEDIENFELD 1 2 3 4 5 6 7 8 9 1 Taste „Ein/Aus“ 6 Touchpad TimeSaver 2 Display 7 Touchpad Multitab 3 Touchpad Delay 4 Touchpad Program 8 Touchpad AutoOpen 9 Kontrolllampen 5 Touchpad ExtraHygiene Kontrolllam- Beschreibung pen Kontrolllampe „Salz“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Klarspülmittel“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Programmende“. 4.
DEUTSCH 61 Programm Verschmutzungsgrad Beladung Programmphasen 5 Normal verschmutzt Geschirr und Besteck Vorspülen ExtraHygiene6) Hauptspülgang 50 °C TimeSaver7) Spülgänge AutoOpen Trocknen Unterschiedlicher Verschmutzungsgrad Geschirr, Besteck, Töpfe und Pfannen Vorspülen TimeSaver Hauptspülgang 70 °C Spülgänge Trocknen 7 Normal oder leicht verschmutzt Empfindliches Geschirr und Gläser Hauptspülgang 45 °C Spülgänge Trocknen 8 Alle Vorspülen 5) 6 8) Optionen 9) 1) Das Gerät erkennt den Ve
www.aeg.com Verbrauchswerte Programm1) Dauer (Min.) Energieverbrauch (kWh) Wasser (l) 1 40 - 150 0.6 - 1.4 7 - 14 2 150 - 160 1.4 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 10 4 30 0.8 9 5 195 0.82 10.2 6 130 - 140 1.2 - 1.3 14 - 15 7 70 - 80 0.7 - 0.9 11 - 12 8 14 0.1 4 1) Druck und Temperatur des Wassers, Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Programmdauer und die Verbrauchswerte verändern.
DEUTSCH 5.1 ExtraHygiene Diese Option sorgt für hygienischere Ergebnisse. Während der Spülphase wird die Temperatur für mindestens 10 Minuten auf 70 °C gehalten. So schalten Sie die Option ExtraHygiene ein 1. Drücken Sie „ExtraHygiene“. Die entsprechende Kontrolllampe leuchtet auf. Im Display können Sie die aktualisierte Programmdauer sehen. • Ist die Option nicht mit dem Programm kombinierbar, blinkt die zugehörige Anzeige 3 Mal kurz und erlischt. 5.
www.aeg.com • Während der Trockenphase wird die Gerätetür von einer besonderen Vorrichtung einen Spaltbreit geöffnet. • Am Programmende wird die Vorrichtung und die Tür zurückgezogen. Das Gerät wird automatisch ausgeschaltet. VORSICHT! Versuchen Sie nicht die Gerätetür zu schließen, während sie von der Vorrichtung offen gehalten wird. Andernfalls kann das Gerät beschädigt werden. Wenn Sie die Option AutoOpen ausschalten möchten, drücken Sie AutoOpen. Die zugehörige Anzeige erlischt.
DEUTSCH 65 5. Drücken Sie die Taste „Ein/Aus“, um das Gerät auszuschalten und die Einstellung zu bestätigen. 6. VOR DER ERSTEN INBETRIEBNAHME 1. Prüfen Sie, ob der Wasserenthärter entsprechend der Wasserhärte in Ihrem Gebiet eingestellt ist. Passen Sie die Einstellung bei Bedarf entsprechend an. Wenden Sie sich an das örtliche Wasserversorgungsunternehmen, um die Wasserhärte in Ihrem Gebiet zu erfahren. 2. Füllen Sie den Salzbehälter. 3. Füllen Sie den Klarspülmittel-Dosierer. 4.
www.aeg.com Manuelle Einstellung Stellen Sie den Wasserhärtestufen-Wähler auf Stufe 1 oder 2. Elektronische Einstellung 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet. 2. Halten Sie Program und ExtraHygiene gleichzeitig gedrückt, bis die Kontrolllampen Delay, Program, ExtraHygiene und TimeSaver blinken. 3. Drücken Sie „Delay“. • Die Kontrolllampen Program, ExtraHygiene und TimeSaver erlöschen.
DEUTSCH 67 6.3 Füllen des Klarspülmittel-Dosierers 1. B A M AX 4 3 2 1 + - C D Drücken Sie die Entriegelungstaste (D), um den Deckel (C) zu öffnen. 2. Füllen Sie den Klarspülmittel-Dosierer (A) nicht über die Marke „max“ hinaus. 3. Wischen Sie verschüttetes Klarspülmittel mit einem saugfähigen Tuch auf, um zu große Schaumbildung zu vermeiden. 4. Schließen Sie den Deckel. Achten Sie darauf, dass die Entriegelungstaste einrastet.
www.aeg.com 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Einstellen und Starten eines Programms Einstellmodus Für einige Einstellungen muss das Gerät im Einstellmodus sein. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Das Gerät befindet sich im Einstellmodus, wenn das Display zwei horizontale Linien anzeigt.
DEUTSCH Beenden des Programms 1. Halten Sie Program und ExtraHygiene gleichzeitig gedrückt, bis das Display 2 horizontale Linien anzeigt. Bevor Sie ein neues Programm starten, stellen Sie sicher, dass der Reinigungsmittelbehälter gefüllt ist. Am Programmende 69 Wichtig • Lassen Sie das Geschirr abkühlen, bevor Sie es aus dem Gerät nehmen. Heißes Geschirr ist stoßempfindlich. • Nehmen Sie das Geschirr zuerst aus dem Unterkorb und dann aus dem Oberkorb.
www.aeg.com 8.3 Beladen der Körbe Beispiele für die Beladung der Körbe finden Sie in der mitgelieferten Broschüre. • Spülen Sie im Gerät nur spülmaschinenfestes Geschirr. • Spülen Sie im Gerät keine Geschirrteile aus Holz, Horn, Aluminium, Zinn oder Kupfer. • Spülen Sie in diesem Gerät keine Gegenstände, die Wasser aufnehmen können (Schwämme, Geschirrtücher, usw.). • Entfernen Sie Speisereste vom Geschirr.
DEUTSCH 2. A1 3. 4. 5. A2 6. 7. 71 Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. Stellen Sie sicher, dass der Filter (B) korrekt unter den beiden Führungen (C) eingesetzt wurde.
www.aeg.com Problem Mögliche Abhilfe Überprüfen Sie, ob die Sicherung im Sicherungskasten nicht ausgelöst hat. Das Programm startet nicht. Überprüfen Sie, ob die Gerätetür geschlossen ist. Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Einstellung ab oder warten Sie das Ende des Countdowns ab. Es läuft kein Wasser in das Gerät. Überprüfen Sie, ob der Wasserhahn geöffnet ist. Überprüfen Sie, ob der Wasserdruck nicht zu niedrig ist.
DEUTSCH Mögliche andere Ursachen finden Sie unter „Tipps und Hinweise“. • Die Kontrolllampe Program blinkt weiter. • Im Display wird die aktuelle Einstellung angezeigt. 10.2 Einschalten des Klarspülmittel-Dosierers Das Einschalten des Klarspülmittel-Dosierers kann nur bei eingeschalteter Option Multitab erfolgen. 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet. 2.
www.aeg.com Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH 75
117912681-A-482012 www.aeg.