FAVORIT 88082 W0P FAVORIT 88082 M0P NL Gebruiksaanwijzing EN User manual FR Notice d'utilisation DE Benutzerinformation 2 19 35 53
www.aeg.com INHOUD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. VEILIGHEIDSVOORSCHRIFTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BESCHRIJVING VAN HET PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENINGSPANEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMMA’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NEDERLANDS 1. 3 VEILIGHEIDSVOORSCHRIFTEN Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor letsel en schade veroorzaakt door een foutieve installatie. Bewaar de instructies van het apparaat voor toekomstig gebruik. 1.1 Veiligheid van kinderen en kwetsbare mensen WAARSCHUWING! Gevaar voor verstikking, letsel of permanente invaliditeit.
www.aeg.com WAARSCHUWING! Gevaarlijke spanning. • Als de watertoevoerslang beschadigd is, haal dan onmiddellijk de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen. 1.
NEDERLANDS 2.
www.aeg.com 3. BEDIENINGSPANEEL 1 AUTO SENSE 45°-70° PRO 70° Extra SILENT 50° 2 Program Quick 30MIN 60° ProZone ECO 50° 70° 3 AUTO PRO 4 SILENT 30MIN Start 8 Delay 45° Option 5 Delay Option 6 7 1 Aan/uit-toets 5 Delay -tiptoets 2 Program -tiptoets 3 Programma-indicatielampjes 6 Option -tiptoets 4 Display 8 Start -tiptoets Indicatielampjes 7 Indicatielampjes Beschrijving Glansmiddelindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is.
NEDERLANDS 7 4.
www.aeg.com 7) Het is niet mogelijk TimeSaver in te stellen als AutoOpen actief is. Deactiveer AutoOpen. 8) Met dit programma kunt u een lading met gecombineerde vervuiling afwassen. Erg zwaar vervuild serviesgoed in de onderste korf en normaal bevuild serviesgoed in de bovenste korf. De waterdruk en de watertemperatuur in de onderste korf zijn hoger dan in de bovenste korf. 9) Gebruik dit programma om het serviesgoed snel te spoelen.
NEDERLANDS display kunt u de update van de programmaduur zien. • Als de optie niet van toepassing is voor het programma, dan gaat het bijbehorende lampje niet branden. 5.2 ExtraHygiene Met deze optie heeft u betere hygiëneresultaten. Tijdens de spoelfase blijft de temperatuur gedurende minimaal 10 minuten op 70 °C. De optie ExtraHygiene activeren 1. Druk op Option totdat het ExtraHygiene-indicatielampje aan gaat. In het display kunt u de update van de programmaduur zien.
www.aeg.com 6. VOOR HET EERSTE GEBRUIK 1. Controleer of het ingestelde niveau van de waterontharder juist is voor de waterhardheid in uw omgeving. Als dat niet het geval is, stelt u de waterontharder in. Neem contact op met uw plaatselijke waterinstantie voor informatie over de hardheid van het water in uw omgeving. 2. Vul het zoutreservoir. 3. Vul het glansmiddeldoseerbakje. 4. Draai de waterkraan open. 5. Er kunnen afwasmiddelen in het apparaat achtergebleven zijn.
NEDERLANDS Elektronische instelling 1. Druk op de aan/uit-toets om het apparaat te activeren. Zorg dat het apparaat in de instelmodus staat. Zie 'Een programma instellen en starten'. 2. Houd Delay en Option tegelijkertijd ingedrukt totdat de indicatielampjes , en van beginnen te knipperen. 3. Druk op Program, • De indicatielampjes van en gaan uit. 11 • Het indicatielampje van blijft knipperen. • Het display toont de actuele instelling van de waterontharder, bijv. = niveau 5. 4.
www.aeg.com 6.3 Het glansmiddeldoseerbakje vullen 1. B A M AX 4 3 2 1 + - C D Druk op de ontgrendelknop (D) om het deksel (C) te openen. 2. Vul het glansmiddeldoseerbakje (A) niet verder dan de aanduiding 'max'. 3. Verwijder gemorst glansmiddel met een absorberend doekje om te voorkomen dat er te veel schuim ontstaat. 4. Sluit het deksel. Zorg ervoor dat het ontgrendelknopje op zijn plaats dichtklikt.
NEDERLANDS 7.2 Een programma instellen en starten Instelmodus Bij sommige instellingen moet het apparaat in de instelmodus worden gezet. Druk op de aan/uit-toets om het apparaat te activeren. Het apparaat staat in de instelmodus als alle programmalampjes gaan branden en het display 2 horizontale statusbalkjes weergeeft. Als dit niet op het bedieningspaneel wordt aangegeven, houdt u tegelijkertijd Delay en Option ingedrukt totdat het apparaat in de instelmodus staat.
www.aeg.com Als u niet op de aan/uit-toets drukt, schakelt de functie AUTO OFF het apparaat een paar minuten na het einde van het programma automatisch uit. Dit helpt het energieverbruik te verminderen, den zijn gevoelig voor beschadigingen. • Ruim eerst het onderrek en dan het bovenrek uit. • Er kan water liggen aan de zijkanten en op de deur van het apparaat. Roestvrij staal koelt sneller af dan borden. Let op • Laat de borden afkoelen voordat u deze uit het apparaat neemt. Hete bor- 8.
NEDERLANDS • Leg lichte voorwerpen in de bovenste korf. Zorg ervoor dat de voorwerpen niet verschuiven. • Zorg er voor dat de sproeiarmen vrij kunnen ronddraaien voordat u een programma start. 15 • De positie van de items in de mandjes correct is. • Het programma van toepassing is op het type lading en de mate van bevuiling. • De juiste hoeveelheid afwasmiddel is gebruikt. • Er regenereerzout en glansmiddel is toegevoegd (tenzij u gecombineerde afwastabletten gebruikt).
www.aeg.com 6. 7. Zorg ervoor dat het filter (B) juist wordt geplaatst onder de 2 geleiders (C). Monteer het filter (A) en zet het terug in filter (B). Rechtsom draaien tot het vastzit. Een onjuiste plaatsing van de filters kan leiden tot slechte wasresultaten en het apparaat beschadigen. 9.2 De sproeiarmen reinigen 9.3 Buitenkant reinigen Probeer niet de sproeiarmen te verwijderen. Als etensresten de openingen in de sproeiarmen hebben verstopt, verwijder deze dan met een smal en puntig voorwerp.
NEDERLANDS Probleem 17 Mogelijke oplossing Zorg dat de waterdruk niet te laag is. Neem hiervoor zo nodig contact op met uw lokale waterleidingbedrijf. Controleer of de waterkraan niet verstopt is. Controleer of het filter in de toevoerslang niet verstopt is. Controleer of er geen knikken of bochten in de watertoevoerslang aanwezig zijn. Het apparaat pompt geen water Controleer of de gootsteenafvoer niet verweg. stopt is. Controleer of er geen knikken of bochten in de waterafvoerslang aanwezig zijn.
www.aeg.com Glansmiddeldoseerbakje uit Glansmiddeldoseerbakje aan 5. Druk op de aan/uit-toets om het apparaat te deactiveren en om de instelling te bevestigen. 6. Stel de hoeveelheid glansmiddel in. 7. Vul het glansmiddeldoseerbakje. 4. Druk op Start om de instelling te wijzigen. 11. TECHNISCHE INFORMATIE Afmeting Breedte / hoogte / diepte (mm) Aansluiting op het elektriciteitsnet Zie het typeplaatje. Voltage 596 / 850 / 610 220-240 V Tijd 50 Hz Waterdruk Min. / max. (bar / MPa) (0.5 / 0.
ENGLISH 19 CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • • • 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
ENGLISH from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments. WARNING! Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance.
www.aeg.com 2.
ENGLISH 23 3. CONTROL PANEL 1 AUTO SENSE 45°-70° PRO 70° Extra SILENT 50° 2 Program Quick 30MIN 60° ProZone ECO 50° 70° 3 AUTO PRO 4 SILENT Start 8 30MIN Delay 45° Option 5 Delay Option 7 6 1 On/off button 5 Delay touchpad 2 Program touchpad 3 Programme indicators 6 Option touchpad 4 Display 8 Start touchpad Indicators 7 Indicators Description Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates.
www.aeg.com 4.
ENGLISH 25 9) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. Consumption values Programme1) Duration (min) Energy (kWh) Water (l) 40 - 150 0.6 - 1.4 7 - 14 150 - 160 1.4 - 1.6 13 - 14 200 - 220 1.1 - 1.2 9 - 10 30 0.8 9 195 0.82 10.2 130 - 140 1.2 - 1.3 14 - 15 70 - 80 0.7 - 0.9 11 - 12 14 0.
www.aeg.com How to activate the ExtraHygiene option 1. Press Option until the ExtraHygiene indicator comes on. In the display you can see the update of the programme duration. • If the option is not applicable to the programme, the related indicator does not come on. 5.3 Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the use of rinse aid and salt. The related indicators stay off. The programme duration can increase.
ENGLISH 27 move them. Do not use detergent and do not load the baskets. 6.1 Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Electronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6 19 - 22 33 - 39 3.3 - 3.
www.aeg.com 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6.2 Filling the salt container 1. 2. 3. 4. 5. Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt container (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it.
ENGLISH • If you use the combi detergent tablets, activate the Multitab option. 29 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance.
www.aeg.com Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. 1. Press and hold, at the same time, Delay and Option until all the programme indicators come on and the display shows 2 horizontal status bars. 2. Set the programme again. Cancelling the programme 1. Press and hold, at the same time, Delay and Option until all the programme indicators come on and the display shows 2 horizontal status bars.
ENGLISH • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery.
www.aeg.com 2. 3. 4. 5. A1 A2 6. 7. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Before you put the filter (B) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that the filter (B) is correctly positioned under the 2 guides (C). Assemble the filter (A) and put it back in filter (B). Turn it clockwise until it locks.
ENGLISH 33 Problem Possible solution The programme does not start. Make sure that the appliance door is closed. Press Start. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged.
www.aeg.com , and start to flash. 3. Press Start . • The indicators of and go off. • The indicator continues to flash. • The display shows the current setting. 4. Press Start to change the setting. 5. Press the on/off button to deactivate the appliance and to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. Rinse aid dispenser off Rinse aid dispenser on 11.
FRANÇAIS 35 SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. INSTRUCTIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
FRANÇAIS AVERTISSEMENT Tension dangereuse. • Si le tuyau d'arrivée d'eau est endommagé, débranchez immédiatement la fiche de la prise secteur. Contactez le service après-vente pour remplacer le tuyau d'arrivée d'eau. 1.
www.aeg.com 2.
FRANÇAIS 39 3. BANDEAU DE COMMANDE 1 AUTO SENSE 45°-70° PRO 70° Extra SILENT 50° Quick 30MIN 60° 2 Program ProZone ECO 50° 70° 3 AUTO PRO 4 SILENT Start 8 30MIN Delay 45° Option 5 Delay Option 7 6 1 Touche Marche/Arrêt 5 Touche Delay 2 Touche Program 3 Voyants des programmes 6 Touche Option 4 Affichage 8 Touche Start Voyants 7 Voyants Description Voyant du réservoir de liquide de rinçage. Ce voyant est toujours éteint pendant le déroulement du programme.
www.aeg.com 4.
FRANÇAIS 41 6) Vous ne pouvez pas régler l'option ExtraHygiene si l'option AutoOpen est activée. Désactivez l'option AutoOpen. 7) Vous ne pouvez pas régler l'option TimeSaver si l'option AutoOpen est activée. Désactivez l'option AutoOpen. 8) Ce programme vous permet de laver de la vaisselle dont le degré de salissure n'est pas homogène. Vaisselle très sale dans le panier inférieur et vaisselle normalement sale dans le panier supérieur.
www.aeg.com vage et de séchage sont réduites. La durée totale du programme diminue d'environ 50 %. Les résultats de lavage seront les mêmes qu'avec la durée normale du programme. Les résultats de séchage peuvent être moins satisfaisants. Comment activer l'option TimeSaver 1. Appuyez sur la touche Option jusqu'à ce que le voyant TimeSaver s'allume. La durée réactualisée du programme s'affiche. • Si cette option n'est pas compatible avec le programme, le voyant correspondant reste éteint. 5.
FRANÇAIS ATTENTION N'essayez pas de fermer la porte de l'appareil lorsque le dispositif la maintient entrouverte. Vous risqueriez d'endommager l'appareil. 43 Si vous souhaitez désactiver l'option AutoOpen, appuyez sur Option jusqu'à ce que le voyant correspondant s'éteigne. Dans ces conditions, la consommation d'énergie du programme augmente. 6. AVANT LA PREMIÈRE UTILISATION 1. Assurez-vous que le niveau réglé pour l'adoucisseur d'eau correspond à la dureté de l'eau de votre région.
www.aeg.com Réglage manuel Tournez le sélecteur de dureté de l'eau sur la position 1 ou 2. Réglage électronique 1. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. Assurez-vous que l'appareil est en mode Programmation ; reportez-vous au chapitre « Réglage et départ d'un programme ». 2. Appuyez simultanément sur les touches Delay et Option jusqu'à ce que , et les voyants se mettent à clignoter. 3. Appuyez sur Program, • Les voyants et s'éteignent. • Le voyant continue à clignoter.
FRANÇAIS 45 6.3 Remplissage du distributeur de liquide de rinçage 1. B A M AX 4 3 2 1 + - C D Appuyez sur le bouton d'ouverture (D) pour ouvrir le couvercle (C). 2. Remplissez le distributeur de liquide de rinçage (A), sans dépasser le repère « max ». 3. Si le liquide de rinçage déborde, épongez-le avec un chiffon absorbant pour éviter tout excès de mousse. 4. Fermez le couvercle. Assurez-vous que le bouton d'ouverture se verrouille correctement.
www.aeg.com 7.1 Utilisation du produit de lavage A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.2 Réglage et départ d'un programme Mode Programmation Certains réglages nécessitent que l'appareil soit en mode Programmation. Appuyez sur la touche Marche/Arrêt pour allumer l'appareil. L'appareil est en mode Programmation lorsque tous les voyants de programme s'allument et 2 barres d'état horizontales sont affichées.
FRANÇAIS Ouverture de la porte au cours du fonctionnement de l'appareil Si vous ouvrez la porte, l'appareil s'arrête. Lorsque vous refermez la porte, l'appareil reprend là où il a été interrompu. Annulation du départ différé au cours du décompte En annulant le départ différé, vous annulez également le programme. 1. Maintenez enfoncées simultanément les touches Delay et Option jusqu'à ce que tous les voyants de programme s'allument et que 2 barres d'état horizontales s'affichent. 2.
www.aeg.com adjuvants. Assurez-vous que ces pastilles sont adaptées à la dureté de l'eau de votre région. Reportez-vous aux instructions figurant sur l'emballage de ces produits. • Les tablettes de détergent ne se dissolvent pas complètement durant les programmes courts. Pour éviter que des résidus de produit de lavage ne se déposent sur la vaisselle, nous recommandons d'utiliser des pastilles de détergent avec des programmes longs. N'utilisez que la quantité nécessaire de produit de lavage.
FRANÇAIS 49 9.1 Nettoyage des filtres C 1. Tournez le filtre (A) vers la gauche et sortez-le. 2. Pour démonter le filtre (A), détachez (A1) et (A2). Retirez le filtre (B). Lavez les filtres à l'eau courante. Avant de remettre le filtre (B) en place, assurez-vous qu'il ne reste aucun résidu alimentaire ni salissure à l'intérieur ou autour du bord du collecteur d'eau. C A B A1 3. 4. 5. A2 6. 7. Assurez-vous que le filtre (B) est correctement positionné, sous les 2 guides (C).
www.aeg.com • - Le système de sécurité anti-débordement s'est déclenché. AVERTISSEMENT Éteignez l'appareil avant de procéder aux vérifications. Problème Solution possible L'appareil ne fonctionne pas. Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. Assurez-vous qu'aucun fusible n'a disjoncté dans la boîte à fusibles. Le programme ne démarre pas. Vérifiez que la porte de l'appareil est fermée. Appuyez sur la touche Start.
FRANÇAIS Taches et traces de gouttes d'eau séchées sur les verres et la vaisselle • La quantité de liquide de rinçage libérée n'est pas suffisante. Placez le sélecteur de dosage du liquide de rinçage sur un niveau plus élevé. • Il se peut que la qualité du produit de lavage soit en cause. La vaisselle est mouillée • Le programme ne contient pas de phase de séchage ou une phase de séchage à basse température. • Le distributeur de liquide de rinçage est vide.
www.aeg.com Capacité Couverts Consommation électrique Mode « Veille » 0.10 W 12 Mode « Arrêt » 0.10 W 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce). 2) Si l'eau chaude est produite à partir de sources d'énergie respectueuses de l'environnement (par exemple, panneaux solaires ou énergie éolienne), utilisez une arrivée d'eau chaude afin de réduire la consommation d'énergie. 12. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le symbole .
DEUTSCH 53 INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr, Risiko von Verletzungen oder permanenten Behinderungen.
DEUTSCH Ummantelung mit einem innenliegenden Netzkabel. • • • WARNUNG! Gefährliche Spannung. • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn der Wasserzulaufschlauch beschädigt ist. Wenden Sie sich für den Austausch des Wasserzulaufschlauchs an den Kundendienst. 1.3 Gebrauch • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com 2.
DEUTSCH 57 3. BEDIENFELD 1 AUTO SENSE 45°-70° PRO 70° Extra SILENT 50° 2 Program Quick 30MIN 60° ProZone ECO 50° 70° 3 AUTO PRO 4 SILENT 30MIN Start 8 Delay 45° Option 5 Delay Option 6 7 1 Taste „Ein/Aus“ 5 Touchpad Delay 2 Touchpad Program 3 Programmkontrolllampen 6 Touchpad Option 4 Display 8 Touchpad Start Kontrolllampen 7 Kontrolllampen Beschreibung Kontrolllampe „Klarspülmittel“. Sie erlischt während des Programmbetriebs. Kontrolllampe „Salz“.
www.aeg.com 4.
DEUTSCH 59 5) Dieses Programm gewährleistet den wirtschaftlichsten Wasser- und Energieverbrauch für normal verschmutztes Geschirr und Besteck. (Dies ist das Standardprogramm für Prüfinstitute.) 6) Die Funktion ExtraHygiene kann nicht zusammen mit AutoOpen eingeschaltet werden. Schalten Sie AutoOpen aus. 7) Die Funktion TimeSaver kann nicht zusammen mit AutoOpen eingeschaltet werden. Schalten Sie AutoOpen aus. 8) Mit diesem Programm können Sie Geschirr mit unterschiedlichem Verschmutzungsgrad spülen.
www.aeg.com 5.1 TimeSaver Wenn diese Option eingeschaltet ist, erhöht sich der Wasserdruck und die Wassertemperatur. Die Spül- und Trockenphasen verkürzen sich. Die Programmdauer verkürzt sich um etwa 50 %. Die Spülergebnisse entsprechen denen einer normalen Programmdauer. Die Trockenergebnisse können beeinträchtigt werden. So schalten Sie die Option TimeSaver ein 1. Drücken Sie Option, bis die Anzeige TimeSaver leuchtet. Im Display können Sie die aktualisierte Programmdauer sehen.
DEUTSCH 61 • Während der Trockenphase wird die Gerätetür von einer besonderen Vorrichtung einen Spaltbreit geöffnet. • Am Programmende wird die Vorrichtung und die Tür zurückgezogen. Das Gerät wird automatisch ausgeschaltet. VORSICHT! Versuchen Sie nicht die Gerätetür zu schließen, während sie von der Vorrichtung offen gehalten wird. Andernfalls kann das Gerät beschädigt werden. Wenn Sie die Option AutoOpen ausschalten möchten, drücken Sie Option, bis die zugehörige Anzeige erlischt.
www.aeg.com Wasserenthärtereinstellung Wasserhärte Deutsche Wasserhärtegrade (°dH) Französische Wasserhärtegrade (°fH) mmol/l Clarke Wasserhärtegrade Manuell Elektronisch 19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 <4 <7 < 0.7 <5 12) 12) 1) Werkseinstellung. 2) Verwenden Sie kein Salz bei diesen Werten.
DEUTSCH 63 6.2 Füllen des Salzbehälters 1. 2. 3. 4. 5. Drehen Sie den Deckel gegen den Uhrzeigersinn und öffnen Sie den Salzbehälter. Füllen Sie 1 Liter Wasser in den Salzbehälter (nur beim ersten Mal). Füllen Sie den Salzbehälter mit Geschirrspülsalz. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. Drehen Sie den Deckel im Uhrzeigersinn, um den Salzbehälter zu schließen. VORSICHT! Beim Befüllen des Salzbehälters können Wasser und Salz austreten.
www.aeg.com • Leuchtet die Kontrolllampe „Klarspülmittel“, füllen Sie den Klarspülmittel-Dosierer. 3. Beladen Sie die Körbe. 4. Füllen Sie Reinigungsmittel ein. • Wenn Sie die Kombi-Reinigungstabletten verwenden, schalten Sie die Option Multitab ein. 5. Stellen Sie je nach Beladung und Verschmutzungsgrad das passende Programm ein. 7.1 Verwendung des Reinigungsmittels A 1. B 2. 30 3. 4 MAX + 32 - 1 20 C 4. 5. 7.
DEUTSCH • Die Phasenanzeigen des gewählten Spülprogramms erlöschen. 3. Drücken Sie „Start“, um den Countdown zu starten. • Die Anzeige der Zeitvorwahl nimmt in Schritten von jeweils 1 Stunde ab. Nach Ablauf der Zeitvorwahl wird das Programm gestartet. Die Anzeige für das laufende Programm leuchtet. Öffnen der Tür während eines laufenden Programms Wenn Sie die Tür öffnen, unterbricht das Gerät das Programm. Wenn Sie die Tür wieder schließen, läuft das Programm ab dem Zeitpunkt der Unterbrechung weiter.
www.aeg.com andere Zusätze. Achten Sie darauf, dass die Tabletten der Wasserhärte in Ihrer Region entsprechen. Beachten Sie die Anweisungen auf der Reinigungsmittelverpackung. • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben. Verwenden Sie nicht mehr als die angegebene Reinigungsmittelmenge.
DEUTSCH 67 9.1 Reinigen der Filter C 1. Drehen Sie den Filter (A) nach links und nehmen Sie ihn heraus. 2. Um den Filter (A) auseinanderzubauen, ziehen Sie (A1) und (A2) auseinander. Nehmen Sie den Filter (B) heraus. Reinigen Sie die Filter mit Wasser. Prüfen Sie, bevor Sie den Filter (B) wieder einsetzen, dass sich keine Lebensmittelreste oder Verschmutzungen in oder um den Rand der Wanne befinden. C A B A1 3. 4. 5. A2 6. 7.
www.aeg.com können, bevor Sie den Kundendienst rufen. Bei manchen Störungen zeigt das Display einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Aquasafe-Einrichtung ist ausgelöst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. Problem Mögliche Abhilfe Das Gerät lässt sich nicht einschalten. Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist.
DEUTSCH 10.1 Die Spül- und Trocknungsergebnisse sind nicht zufriedenstellend. Weiße Streifen oder blau schimmernder Belag auf Gläsern und Geschirr • Die zugegebene Klarspülmittelmenge ist zu hoch. Stellen Sie den Dosierwähler für Klarspülmittel niedriger ein. • Die Reinigungsmittelmenge ist zu hoch. 1. Drücken Sie die Taste „Ein/Aus“, um das Gerät einzuschalten. Stellen Sie sicher, dass sich das Gerät im Einstellmodus befindet, siehe Abschnitt „Einstellen und Starten eines Programms“. 2.
www.aeg.com Spannung 220-240 V Frequenz 50 Hz Wasserdruck Min. / max. (bar / MPa) Wasserversorgung 1) Kalt- oder Warmwasser2) (0.5 / 0.05 ) / (8 / 0.8 ) Fassungsvermögen Gedecke Leistungsaufnahme Unausgeschaltet 0.10 W Ausgeschaltet 0.10 W max. 60 °C 12 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 2) Wenn Sie Heißwasser mit umweltfreundlichen, alternativen Energiequellen (z. B.
DEUTSCH 71
117914611-A-492012 www.aeg.