DE IT Benutzerinformation Geschirrspüler Istruzioni per l’uso Lavastoviglie 2 23 FAVORIT 88705 VI1P
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN............................................................................ 3 2. SICHERHEITSANWEISUNGEN................................................................................ 4 3. GERÄTEBESCHREIBUNG.........................................................................................6 4. BEDIENFELD............................................................................................................. 7 5. PROGRAMME..............
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.1 Allgemeine Sicherheit • • • • • • • • • Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
www.aeg.com • Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. 1.
DEUTSCH • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker.
www.aeg.com • Schneiden Sie das Netzkabel ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. 3. GERÄTEBESCHREIBUNG 1 2 3 12 11 10 1 2 3 4 5 6 7 8 9 10 11 12 9 8 Oberster Sprüharm Oberer Sprüharm Unterer Sprüharm Filter Typenschild Salzbehälter Lüftungsschlitze Klarspülmittel-Dosierer Reinigungsmittelbehälter Unterkorb Oberkorb Besteckschublade 3.
DEUTSCH 4. BEDIENFELD 1 1 2 3 4 5 2 Taste „Ein/Aus“ Display Delay Touchpad Program Touchpad ExtraHygiene Touchpad 3 4 6 7 8 9 5 6 7 8 9 TimeSaver Touchpad ProBoost Touchpad AutoOpen Touchpad Kontrolllampen 4.1 Kontrolllampen Kontrolllampe Beschreibung Kontrolllampe Multitab Kontrolllampe Salz Sie erlischt während des Programmbetriebs. Kontrolllampe Klarspülmittel Sie erlischt während des Programmbetriebs. 5.
www.aeg.
DEUTSCH 5.1 Verbrauchswerte Wasser (l) Energieverbrauch (kWh) Dauer (Min.) P1 11 0.857 225 P2 7 - 14 0.6 - 1.4 40 - 150 P3 14 - 16 1.2 - 1.5 139 - 149 P4 12.5 - 14.5 1.4 - 1.6 154 - 164 P5 12 - 14 0.7 - 0.9 75 - 85 P6 9.5 - 10.5 1.10 - 1.30 55 - 65 P7 10 0.9 30 P8 4 0.1 14 P9 9 - 10 1.0 - 1.2 219 - 229 Programm 1) 1) Druck und Temperatur des Wassers, die Schwankungen in der Stromversorgung, die ausgewählten Optionen und die Geschirrmenge können die Werte verändern.
www.aeg.com • Klarspülmittelstufe gemäß der erforderlichen Dosierung. auf die Spülergebnisse und das Gerät auswirken könnten. Diese Einstellungen bleiben gespeichert, bis sie von Ihnen wieder geändert werden. Je höher der Mineralgehalt ist, um so härter ist das Wasser. Die Wasserhärte wird in gleichwertigen Einheiten gemessen. Einstellen des Programmwahlmodus Der Enthärter muss entsprechend der Wasserhärte in Ihrem Gebiet eingestellt werden.
DEUTSCH Einstellen des Wasserenthärters , , , und blinken und das Display nichts anzeigt. 2. Drücken Sie Das Gerät muss sich im Programmwahlmodus befinden. und Benutzermodus gleichzeitig und gedrückt, bis die Kontrolllampen , , , und blinken und das Display nichts anzeigt. . • Die Kontrolllampen und , . • Die Kontrolllampen 1. Halten Sie zum Aufrufen des 2. Drücken Sie 11 , erlöschen. • Die Kontrolllampe blinkt weiter. • Im Display wird die aktuelle Einstellung angezeigt: z.B. Stufe 5.
www.aeg.com • Im Display wird die aktuelle Einstellung angezeigt: Klarspülmittel-Dosierer eingeschaltet. 3. Drücken Sie = Signalton ist eingeschaltet. 4. Drücken Sie die Taste „Ein/Aus“ zum Bestätigen der Einstellung. = zum Ändern der Einstellung. = KlarspülmittelDosierer abgeschaltet. Die Kontrolllampe „Klarspülmittel“ erlischt. 4. Drücken Sie die Taste „Ein/Aus“ zum Bestätigen der Einstellung. 6.5 Signaltöne Bei einer Störung des Geräts ertönen akustische Signale.
DEUTSCH 13 7. OPTIONEN Sie müssen die gewünschten Optionen vor dem Programmstart einschalten. Es ist nicht möglich, Optionen während eines laufenden Programms einoder auszuschalten. Nicht alle Optionen lassen sich miteinander kombinieren. Wenn Sie Optionen einschaltet haben, die nicht miteinander kombinierbar sind, schaltet das Gerät automatisch eine oder mehrere von ihnen aus. Es leuchten dann nur die Anzeigen der noch eingeschalteten Optionen. 7.
www.aeg.com entsprechende Kontrolllampe nicht oder sie blinkt ein paar Sekunden schnell und erlischt dann. Das Display zeigt die aktualisierte Programmdauer an. 7.5 AutoOpen Mit dieser Option erhalten Sie bessere Trockenergebnisse bei einem geringeren Energieverbrauch. • Am Programmende werden Vorrichtung und Tür zurückgezogen. Das Gerät wird automatisch ausgeschaltet. ACHTUNG! Versuchen Sie nicht, die Gerätetür zu schließen, während sie von der Vorrichtung offen gehalten wird.
DEUTSCH 15 8.2 Füllen des KlarspülmittelDosierers A B 4. Entfernen Sie das Salz, das sich um die Öffnung des Salzbehälters herum angesammelt hat. C 5. Drehen Sie den Deckel des Salzbehälters im Uhrzeigersinn, um den Salzbehälter zu schließen. Beim Befüllen des Salzbehälters können Wasser und Salz austreten. Korrosionsgefahr. Starten Sie ein Programm, nachdem Sie den Salzbehälter befüllt haben, um die Korrosion zu vermeiden. ACHTUNG! Verwenden Sie ausschließlich Klarspülmittel für Geschirrspüler. 1.
www.aeg.com 9.1 Verwenden des Reinigungsmittels A B C ACHTUNG! Verwenden Sie nur Reinigungsmittel für Geschirrspüler. 1. Drücken Sie die Entriegelungstaste (A), um den Deckel (C) zu öffnen. 2. Füllen Sie das Reinigungsmittel ein oder legen Sie eine Reinigungstablette in den Behälter (B). 3. Wenn das Programm einen Vorspülgang hat, schütten Sie eine kleine Menge Reinigungsmittel auf die Innenseite der Gerätetür. 4. Schließen Sie den Deckel. Achten Sie darauf, dass der Deckel einrastet. 9.
DEUTSCH Wenn die Tür während der Trockenphase länger als 30 Sekunden geöffnet wird, wird das laufende Programm beendet. Dies geschieht nicht, wenn das Programm mit AutoOpen läuft. Abbrechen einer eingestellten Zeitvorwahl während des Countdowns Wenn Sie die eingestellte Zeitvorwahl abbrechen, müssen das Programm und die Optionen erneut eingestellt werden. und gleichzeitig Halten Sie gedrückt, bis sich das Gerät im Programmwahlmodus befindet. 17 Abbrechen des Programms 1. Öffnen Sie die Gerätetür. 2.
www.aeg.com • Wenn Sie die KombiReinigungstabletten verwenden, können Sie die Option Multitab verwenden (falls verfügbar). Diese Option verbessert die Reinigungsund Trocknungsergebnisse bei Verwendung von KombiReinigungstabletten. • Geschirrspüler-Tabs lösen sich bei kurzen Programmen nicht vollständig auf. Wir empfehlen, die Tabletten nur mit langen Programmen zu verwenden, damit keine Reinigungsmittel-Rückstände auf dem Geschirr zurückbleiben.
DEUTSCH 19 11. REINIGUNG UND PFLEGE WARNUNG! Schalten Sie das Gerät immer aus und ziehen Sie den Netzstecker aus der Steckdose, bevor Reinigungsarbeiten durchgeführt werden. Verschmutzte Filter und verstopfte Sprüharme beeinträchtigen das Spülergebnis. Prüfen Sie die Filter regelmäßig und reinigen Sie diese, falls nötig. 2. Nehmen Sie den Filter (C) aus dem Filter (B). 3. Entfernen Sie den flachen Filter (A). 11.1 Reinigen der Filter Das Filtersystem besteht aus 3 Teilen. 4. Reinigen Sie die Filter.
www.aeg.com 11.2 Reinigen der Sprüharme Bauen Sie die Sprüharme nicht aus. Falls die Löcher in den Sprüharmen verstopft sind, reinigen Sie sie mit einem dünnen spitzen Gegenstand. 11.3 Reinigen der Außenseiten 7. Bauen Sie die Filter (B) und (C) wieder zusammen. 8. Setzen Sie den Filter (B) in den flachen Filter (A) ein. Drehen Sie ihn nach rechts, bis er einrastet. • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. • Verwenden Sie ausschließlich Neutralreiniger.
DEUTSCH 21 Problem und Alarmcode Mögliche Abhilfe Das Programm startet nicht. • Vergewissern Sie sich, dass die Tür geschlossen ist. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Zeitvorwahl ab, oder warten Sie, bis sie abgelaufen ist. • Das Gerät regeneriert das Filterharz des Wasserenthärters. Dieser Vorgang dauert ca. 5 Minuten. Es läuft kein Wasser in das Gerät. • Vergewissern Sie sich, dass der Wasserzulauf geöffnet ist.
www.aeg.com Problem Mögliche Abhilfe Das Geschirr ist nass. • Das Programm enthält keine Trocknungsphase oder eine Trocknungsphase mit niedriger Temperatur. • Der Klarspülmittel-Dosierer ist leer. • Die Ursache kann in der Qualität des Klarspülmittels liegen. • Die Ursache kann in der Qualität der Multi-Reinigungstabletten liegen. Probieren Sie eine andere Marke aus oder schalten Sie den Klarspülmittel-Dosierer ein und verwenden Sie ihn zusammen mit den Multi-Reinigungstabletten.
ITALIANO 23 INDICE 1. INFORMAZIONI PER LA SICUREZZA.................................................................... 24 2. ISTRUZIONI DI SICUREZZA....................................................................................25 3. DESCRIZIONE DEL PRODOTTO........................................................................... 27 4. PANNELLO DEI COMANDI................................................................................... 28 5. PROGRAMMI..............................................
1. www.aeg.com INFORMAZIONI PER LA SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. Il produttore non è responsabile se un'installazione ed un uso non corretto dell'apparecchiatura provocano lesioni e danni. Tenere sempre le istruzioni a portata di mano come riferimento futuro. 1.
ITALIANO • 25 L'apparecchiatura deve essere collegata correttamente all'impianto idrico con i tubi nuovi forniti. I tubi usati non devono essere riutilizzati. 1.
www.aeg.com • Non tirare il cavo di alimentazione per scollegare l’apparecchiatura. Tirare sempre dalla spina. • Questa apparecchiatura è conforme alle direttive CEE. • Solo per il Regno Unito e l'Irlanda. L'apparecchiatura è dotata di spina di alimentazione da 13 amp. Se si rendesse necessario cambiare il fusibile della spina di alimentazione, utilizzarne uno da 13 amp ASTA (BS 1362). 2.3 Collegamento dell’acqua • Accertarsi di non danneggiare i tubi di carico e scarico dell'acqua.
ITALIANO 27 3. DESCRIZIONE DEL PRODOTTO 1 2 3 12 11 10 1 2 3 4 5 6 7 8 9 10 11 12 9 8 Mulinello su cielo vasca Mulinello superiore Mulinello inferiore Filtri Targhetta dei dati Contenitore del sale Apertura di ventilazione Contenitore del brillantante Contenitore del detersivo Cestello inferiore Cestello superiore Cassetto portaposate 3.1 TimeBeam Il TimeBeam è un display proiettato sul pavimento al di sotto della porta dell'apparecchiatura.
www.aeg.com 4. PANNELLO DEI COMANDI 1 1 2 3 4 5 2 Tasto On/Off Display Pulsante touch Delay Pulsante touch Program Pulsante touch ExtraHygiene 3 4 6 7 8 9 5 6 7 8 9 Pulsante touch TimeSaver Pulsante touch ProBoost Pulsante touch AutoOpen Spie 4.1 Spie Spia Descrizione Spia Multitab. Spia del sale. La spia è spenta durante l'esecuzione del programma. Spia del brillantante. La spia è spenta durante l'esecuzione del programma. 5.
ITALIANO Programma Grado di sporco Tipo di carico Fasi del programma Opzioni P4 • Sporco intenso • Stoviglie miste, posate e pentole • • • • • ProBoost • TimeSaver • Multitab P5 • Sporco normale o leggero • Stoviglie e bicchieri delicati • Lavaggio a 45°C • Risciacqui • Asciugatura • Multitab P6 • Sporco leggero • Stoviglie e posate • Lavaggio a 55°C • Risciacqui • ExtraHygiene • Multitab • Sporco fresco • Stoviglie e posate • Lavaggio a 60°C • Risciacqui • ExtraHygiene • Multitab • Tutt
www.aeg.com 5.1 Valori di consumo Acqua (l) Energia (kWh) Durata (min) P1 11 0.857 225 P2 7 - 14 0.6 - 1.4 40 - 150 P3 14 - 16 1.2 - 1.5 139 - 149 P4 12.5 - 14.5 1.4 - 1.6 154 - 164 P5 12 - 14 0.7 - 0.9 75 - 85 P6 9.5 - 10.5 1.10 - 1.30 55 - 65 P7 10 0.9 30 P8 4 0.1 14 P9 9 - 10 1.0 - 1.
ITALIANO 6.2 Decalcificatore dell’acqua • Il livello di brillantante in base al dosaggio richiesto. Il decalcificatore rimuove dall'acqua i minerali che avrebbero effetti negativi sui risultati di lavaggio e sull'apparecchiatura. Tali impostazioni vengono memorizzate fino alla successiva modifica. Come impostare la modalità di selezione programma Quando si attiva l’apparecchiatura, generalmente si trova in modalità di selezione programma.
www.aeg.com • Il display mostra l'impostazione corrente: ad es. = livello 5. 3. Premere ripetutamente il tasto per modificare l'impostazione. 4. Premere il tasto On/Off per confermare l'impostazione. 6.4 Utilizzo del brillantante e delle pastiglie multifunzione Quando si attiva l'opzione Multitab, il contenitore del brillantante continua a rilasciare il brillantante.. È possibile disattivare il contenitore del brillantante.
ITALIANO Come attivare il segnale acustico che indica il termine del programma L'apparecchiatura deve essere in modalità di selezione programma. 1. Per accedere alla modalità utente, tenere premuti contemporaneamente finché le spie , e , , iniziano a lampeggiare e il display è vuoto. 2. Premere • Le spie , spengono. , e si • La spia continua a lampeggiare. • Il display mostra l'impostazione corrente: non attivo.
www.aeg.com Come attivare Multitab Tenere premuti contemporaneamente e accende. finché la spia non si 7.2 TimeSaver L'opzione aumenta la pressione e la temperatura dell'acqua. Le fasi di lavaggio e di asciugatura sono più brevi. La durata complessiva del programma si riduce di circa il 50%. I risultati di lavaggio sono gli stessi che si ottengono con la normale durata del programma. I risultati di asciugatura possono ridursi.
ITALIANO Questa opzione non è impostabile con tutti i programmi di lavaggio. Per disattivare l'opzione AutoOpen, premere 35 spegne. In questa condizione, il consumo energetico del programma aumenta. . La spia corrispondente si 8. PREPARAZIONE AL PRIMO UTILIZZO 1. Accertarsi che il livello del decalcificatore dell'acqua attuale sia conforme alla durezza dell'acqua. In caso contrario, regolare il livello del decalcificatore dell'acqua. 2. Riempire il contenitore del sale. 3.
www.aeg.com 8.2 Come riempire il contenitore del brillantante A AVVERTENZA! Utilizzare solo prodotti brillantanti specifici per lavastoviglie. B 1. Aprire il coperchio (C). 2. Riempire il contenitore (B) finché il brillantante non raggiunge l'indicazione di "MAX". 3. Rimuovere l'eventuale brillantante fuoriuscito con un panno assorbente, per evitare che si formi troppa schiuma. 4. Chiudere il coperchio. Assicurarsi che il coperchio si blocchi in posizione.
ITALIANO 9.2 Impostazione ed avvio di un programma Funzione Auto Off Questa funzione permette di ridurre il consumo di energia disattivando automaticamente l'apparecchiatura quando non è in funzione. La funzione si attiva: • Dopo 5 minuti dal termine del programma. • Dopo 5 minuti se il programma non è stato avviato. Avvio di un programma 1. Tenere la porta dell'apparecchiatura socchiusa. 2. Premere il tasto On/Off per accendere l’apparecchiatura.
www.aeg.com 10. CONSIGLI E SUGGERIMENTI UTILI 10.1 Informazioni generali I seguenti suggerimenti garantiranno una pulizia e risultati di asciugatura quotidiani ottimali ed aiuteranno a salvaguardare l'ambiente. • Gettare i residui di cibo più grandi nella spazzatura. • Non prelavare le stoviglie a mano. Se necessario, utilizzare il programma prelavaggio (se disponibile) o selezionare un programma con fase di prelavaggio. • Utilizzare sempre tutto lo spazio presente nei cestelli.
ITALIANO • Eliminare i residui di cibo dalle stoviglie. • Ammorbidire le tracce di bruciato sulle stoviglie. • Disporre gli utensili cavi (tazze, bicchieri e padelle) con l’apertura rivolta verso il basso. • Assicurarsi che le posate e i piatti non aderiscano tra loro. Mescolare i cucchiai con le altre posate. • Verificare che i bicchieri non si tocchino l’un l’altro. • Disporre gli oggetti piccoli nel cestello portaposate.
www.aeg.com 2. Estrarre il filtro (C) dal filtro (B). 3. Rimuovere il filtro piatto (A). 7. Rimontare i filtri (B) e (C). 8. Posizionare nuovamente il filtro (B) nel filtro piatto (A). Ruotarlo in senso orario finché non si blocca in posizione. 4. Lavare i filtri. AVVERTENZA! Un’errata posizione dei filtri può comportare scadenti risultati di lavaggio e danni all’apparecchiatura. 11.2 Pulizia dei mulinelli Non rimuovere i mulinelli.
ITALIANO guarnizione in gomma della porta, con un panno morbido umido. • Se si usano regolarmente programmi di breve durata, è possibile riscontrare depositi di grasso e 41 calcare all'interno dell'apparecchiatura. Per evitarlo, si consiglia di avviare programmi lunghi almeno 2 volte al mese. 12. RISOLUZIONE DEI PROBLEMI L'apparecchiatura non si avvia o si blocca durante il funzionamento.
www.aeg.com 12.1 I risultati di lavaggio e di asciugatura non sono soddisfacenti Problema Possibile soluzione Su bicchieri e stoviglie riman- • La quantità di brillantante erogata è eccessiva. Imposgono delle striature biancastre tare il selettore del brillantante nella posizione inferio striature bluastre. ore. • È stata utilizzata una dose eccessiva di detersivo. Macchie e tracce di gocce d'acqua su bicchieri e stoviglie. • La quantità di brillantante erogata non è sufficiente.
ITALIANO 14. CONSIDERAZIONI SULL'AMBIENTE Riciclare i materiali con il simbolo . Buttare l'imballaggio negli appositi contenitori per il riciclaggio. Aiutare a proteggere l’ambiente e la salute umana e a riciclare rifiuti derivanti da apparecchiature elettriche ed elettroniche. Non smaltire le apparecchiature che riportano il simbolo insieme ai normali rifiuti domestici. Portare il prodotto al punto di riciclaggio più vicino o contattare il comune di residenza.
117906011-A-192014 www.aeg.