FAVORIT 88419 W0P EN User manual
www.aeg.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. • • • 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Service to replace the water inlet hose. 1.3 Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
ENGLISH 2.
www.aeg.com 3. CONTROL PANEL 1 2 8 3 4 7 5 6 1 On/off button 5 Delay touchpad 2 Program touchpad 6 Start touchpad 3 Programme indicators 7 Indicators 4 Display 8 Option touchpad Indicators Description Multitab indicator. ÖKO PLUS indicator. ExtraHygiene indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. End indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator.
ENGLISH 7 4.
www.aeg.com 7) With this programme you can wash a load with mixed soil. Very heavy soil in the lower basket and normal soil in the upper basket. The water pressure and the water temperature in the lower basket are higher than in the upper basket. Consumption values Programme1) Duration (min) Energy (kWh) Water (l) 80 - 140 0.7 - 1.3 8 - 14 130 - 150 1.1 - 1.2 10 - 11 180 - 200 0.9 - 1.0 8-9 30 0.8 7 195 0.79 8.9 40 - 50 0.8 - 0.9 8-9 120 - 130 1.1 - 1.2 11 - 12 70 - 80 0.
ENGLISH Press Option 1 time on off off 2 times off on off 3 times on on off 4 times off off on 5 times on off on 6 times off off off If you stop to use the combi detergent tablets, before you start to 9 use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Adjust the water softener to the highest level. 2. Make sure that the salt container and the rinse aid dispenser are full. 3.
www.aeg.com You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. 2. Press and hold, at the same time, Delay and Start until the indicators of , and start to flash. 3. Press Program, • The indicators of and go off. • The indicator of continues to flash.
ENGLISH 11 6.3 Filling the rinse aid dispenser 1. Press the release button (D) to open the lid (C). 2. Fill the rinse aid dispenser (A), no more than the mark 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position. B A M AX 4 3 2 1 + - C D You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). 7. DAILY USE 1.
www.aeg.com 7.2 Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. Press the on/off button to activate the appliance. The appliance is in setting mode when all the programme indicators come on and the display shows 2 horizontal status bars. If the control panel does not show this condition, press and hold, at the same time Delay and Start until the appliance is in setting mode. Starting a programme without delay start 1.
ENGLISH Important • Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. 13 • There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes. 8. HINTS AND TIPS 8.1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results.
www.aeg.com • The position of the items in the baskets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tablets). • The cap of the salt container is tight. 9. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
ENGLISH 9.3 External cleaning Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. 15 grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. 9.4 Internal cleaning If you regularly use short duration programmes, these can leave deposits of 10. TROUBLESHOOTING The appliance does not start or it stops during operation.
www.aeg.com Problem Possible solution Make sure that the drain hose has no kinks or bends. The anti-flood device is on. Close the water tap and contact the Service. After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes, contact the Service. 10.
ENGLISH Electrical connection 17 Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water or hot water2) Capacity Place settings 9 Power consumption Left-on mode 0.10 W Off-mode 0.10 W max. 60 °C 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g.
www.aeg.
ENGLISH 19
117931732-A-102013 www.aeg.